ReviewsPtfe Teflon Material

CSFMC Teflon Furniture Sliders Pads(24 Pack 3/4 inch(19mm) Base),Table/Chair/Cabinet/Sofa Small Size PTFE Glides,Stainless Steel Screw on Protect The Floor,Heavy Duty Sliding Block for Furniture

✅ Wide range of applications>>>>>3/4 inch(19mm)Base diameter.Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground, which will damage the PTFE layer..
✅ Protect your floor>>>>>Bottom of 5.5 mm thick, protect your solid wood, tile floor and carpet, etc…Clever design, Stainless steel screw on installation, no rust.with a metal gasket embedded in the middle to prevent it from falling off..
✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture slides.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..
✅ Packing specification >>>>>You’ll get 24 pcs furniture slide pads. Now you can move your furniture around easily and quietly without hurting the floor..
✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well..

Check Stock

CSFMC Furniture Leveler PTFE(Teflon) Bottom(28mm Base 1/4-20,8 Pack),Threaded Shank Adjust Pads,Table/Chair/Cabinet/Sofa Medium Adjustable Legs Leveling,Nuts Installation and Floor Protection

✅ Keep your furniture from rocking>>>>>The adjustment slider can be adjusted from 3/8 to 1.25 inches.Let your furniture never look like a drunk again..
✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well.Move furniture will not damage the floor, and quiet.protect your solid wood, tile floor and carpet, etc....
✅ Strong feet support>>>>>1/4-20 x 1.5 inches High strength bolt.An antirust plating surface.More than 200 pounds of support per leg..
✅ Wide range of applications>>>>>Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground when sliding, otherwise the PTFE layer will be damaged..
✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture sliders.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..

Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
Attention - small 3D printer accessories, please keep away from children.

Check Stock

Heat Press Pillow Heat Pressing Transfer Pillow Teflon Heat Resistant Pressing Pillows for Screen Print and Heat Pressing Shirts 4 Pack 4 Sizes

4 Pack: Package Includes 4 pieces heat transfer pillows made of Teflon, 5”x5”/10”x10”/12”x15”/ 5”x15” 4 different sizes perfect heat....
Material: Our heat press pillow are made of Non-Stick PTFE Teflon Paper and Fire Resistance High Density Foam, ensures the heat pressing transfer....
Eliminates the indentations: Heat resistance pillows help to lift the print area of your substrate, can make the surface smooth and even, ensure....
Wide Application: Genuine high quality Teflon pressing pillows can be placed underneath to avoid burns and protect the workbench very well, as perfect....
BEST SERVICE: Your satisfaction means everything to us. If you have any questions about our Teflon heat resistant pressing pillows products or any....

Check Stock

YANSHON Teflon Furniture Sliders, 0.98'' Screw On Furniture Sliders, 20 Pack Reusable Furniture Glides with Screws for Table/Chair/Cabinet/Sofa, Great Floor Protector

[ Premium Material ] chair leg sliders made of PTFE (Teflon) material and high quality rubber, with carbon steel screw on design ensure longevity and durability..
[ Scratch-proof & Noise Dampening ] 5 mm thick extra strength teflon sliders keep your furniture away wet.
Carefully protect the floor surface from scratches and scuffs. To avoid noise from moving on the floor.
[ Easy To Install ] The core of sliders furniture glides come with screws can be drilled into almost anything. Not only fit the furniture leg perfectly but also durability for use..
[ Make Your Furniture Easy To Move ] 25 mm/0.98'' furniture glides nail in with smooth teflon bottom, reusable and easy to clean.Let the furniture slide like magic and slide fast..
[ Various Application ] 20pcs teflon floor protector sliders with screw, perfect for all furniture: sofa, bed, table, couch, dining chairs, and work well on wooden, laminate, vinyl, tiled floor..

Check Stock

Willow and the Indian Trail Marker Tree

❤Waterproof & Washable - Our 3 pack Teflon Sheet for Heat Press Reusable is easily wipe off messy materials like wipe glue, wax or clay .
❤Heat Resistance & Non Stick - Heat press transfer sheet allows high temperature resistance up to 600 °degrees, protect your working surface,perfect for heat press.
❤Reusable & Tear Resistant - Our teflon sheets are made from super thick paper, these high-quality Teflon Paper are tear resistant and durable use for many times..
❤Wide Application - PTFE Teflon Sheets can serving as nonstick oven liners, iron clothes protector, heat press transfers and other crafting projects,for example baking,cooking,pressing,ironing..
❤Can be cut to any size - These heat transfer teflon sheet can be used for a wide variety of craft projects. Just trim teflon sheet for heat press to size for your crafting requirements. Your creativity is unlimited!.

Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
Teflon tubes are made of premium PTFE material, unique....
Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..

Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....

Check Stock

BVV 1/4\ 37 Degree Female JIC Stainless Steel Hose-24-inch

1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..

Check Stock

Furniture Slider Pads, 20pcs Teflon Moving Furniture Glides Self Adhesive Feet Protector for Carpet, Tiled and Hardwood Floors

Durable Teflon Material – These furniture sliders are made of durable PTFE (Teflon) material , which can make sure longevity for periods of time.
Easy to Use Gliders – With self adhesive glides, you can just stick onto the bottom of the legs of furniture, then press tightly. Easy to install and remove. No Tools Needed. Please clean and dry the furniture legs before you paste the sliders.
Furniture Easy Movers – Our chair leg sliders are designed for moving furniture with ease. No worries whatever furnitures you would like to move such as sofa, desk, chair, bed etc, even if heavy items.
Protect Your Floor and Carpet – Our adhesive furniture gliders with thick base which can prevent floors from scratching and reduces noise when move your furnitures around the room.Don’t worry about damaging your expensive furniture and carpet.
Wide Applications – Package includes 20pcs teflon floor protector sliders, they are suitable for various furnitures and work well on wooden, laminate ,vinyl, tiled floor. Enough for your different needs whenever move.

Check Stock

OUOSY Non-Stick PTFE Teflon Sheet for Heat Press 16' x 24 Reusable Transfer Sheets for T-Shirt Press HTV Ironing Quilting Crafting Baking and Heat transferring, 500 Degrees 4 Pack, White

Non-stick & Easy Clean Up : Clean up is a breeze. Nothing sticks to these PTFE teflon sheet. You just wash them in soapy water and soft cloth. Please do not scratch them with sharp knives.Meanwhile, the sheets are waterproof. Just wipe off drips or water with soft cloth..
Heat & Tear Resistance : The transfer sheets are made from high quality food-grade fiberglass cloth coated PTFE teflon that makes them strong and sturdy. They are heat and tear resistance. High temperature up to 260℃ (500℉). They are perfect items for some projects in high temperature..
Reusable & Durable : These sheets can be used over and over again.Both side use.The teflon sheets are easy to cut down to any size and do exactly what you need them to do..
Wide Application: The heat teflon sheet can serve as pressing vinyl onto shirts, iron-transfer, quilting,crafting, baking sheets, cooking sheet, splatter liners for oven, iron clothes protector, painting sheets, HTV transfer sheet and more. The non-stick surface is easily wipe off messy materials like wipe acrylic, watercolors, resin, hot glue, wax, baking clay. You can use these over fabric to protect more delicate fibers..
Package Include: 4 pack teflon sheets in a package. Each size is 16’’ x 24’’ (40 x 60cm). They come....

Check Stock