ReviewsPtfe Teflon Production Line

5 Pcs 30mm(11.8 inch) PTFE Magnetic Stirrer Mixer Stir Bar,White Color,Laboratory Bar,Stir Plate Bar,8mm30mm Stir Bars….

  • HIGH QUALITY - Teflon PTFE material can be used with corrosive chemicals, including acid and base.
  • LABORATORY GRADE - Virgin PTFE (Teflon) around solid steel core..
  • EASY USE - Helps you easily recover your stir bars in containers.
  • 100% MONEY BACK GUARANTEE - We want you to be 100% Satisfied with your purchase. Absolutely no risk. Give our product a try by ordering today..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

4 Rolls 1/2 Inch(W) X 520 Inches(L) Teflon Tape,for Plumbers Tape,PTFE Tape,Sealing Tape,Plumbing Tape,Sealant Tape,Thread Seal Tape,Plumber Tape for Shower Head,Water Pipe Sealing Tape,White

  • Teflon tape has a sealing function to prevent the leakage of water or gas..
  • Each roll of teflon tape has a width of 1/2 inch and a length of 520 inches, which can be used multiple times..
  • Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance,tephlon tape is widely used in home and office..
  • This tape is made of PTFE material, which has high sealing and durability..
  • You will get 4 rolls of ptfe tape in one package..
Check Stock

KAWASAKI 2008-2013 Ninja 250R / EX 250 R GALFER REAR STAINLESS STEEL BRAIDED BRAKE LINE KIT

  • ...e lines will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at their maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times..
  • Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. The kits come standard with polished silver on brass fittings with matching bolts..
  • Galfer brake lines come with a lifetime warranty. Color fade, hazing, even crashing your bike will not void the warranty. Simply contact Galfer directly, supply some information, and get your new line!.
  • All brake lines will be shipped in Galfers Clear (Silver) line color pictured in the main listing photo. Black, White, Smoke, Blue, Red, Gold, Yellow, Green, and Orange line colors are also available upon request . If you would like your line kit in any of these other line colors please contact us before your purchase to check availability..
Check Stock

OUOSY Non-Stick PTFE Teflon Sheet for Heat Press 16' x 24 Reusable Transfer Sheets for T-Shirt Press HTV Ironing Quilting Crafting Baking and Heat transferring, 500 Degrees 4 Pack, White

  • Non-stick & Easy Clean Up : Clean up is a breeze. Nothing sticks to these PTFE teflon sheet. You just wash them in soapy water and soft cloth. Please do not scratch them with sharp knives.Meanwhile, the sheets are waterproof. Just wipe off drips or water with soft cloth..
  • Heat & Tear Resistance : The transfer sheets are made from high quality food-grade fiberglass cloth coated PTFE teflon that makes them strong and sturdy. They are heat and tear resistance. High temperature up to 260℃ (500℉). They are perfect items for some projects in high temperature..
  • Reusable & Durable : These sheets can be used over and over again.Both side use.The teflon sheets are easy to cut down to any size and do exactly what you need them to do..
  • Wide Application: The heat teflon sheet can serve as pressing vinyl onto shirts, iron-transfer, quilting,crafting, baking sheets, cooking sheet, splatter liners for oven, iron clothes protector, painting sheets, HTV transfer sheet and more. The non-stick surface is easily wipe off messy materials like wipe acrylic, watercolors, resin, hot glue, wax, baking clay. You can use these over fabric to protect more delicate fibers..
  • Package Include: 4 pack teflon sheets in a package. Each size is 16’’ x 24’’ (40 x 60cm). They come....
Check Stock

Lurrose Halloween Witch Finger Cover 20 PCS Colorful Halloween Spooky Scary Witches Nails Fake Finger Claws Zombie Nail Prank Props for Halloween Cosplay Costume Party

  • ❤Waterproof & Washable - Our 3 pack Teflon Sheet for Heat Press Reusable is easily wipe off messy materials like wipe glue, wax or clay .
  • ❤Heat Resistance & Non Stick - Heat press transfer sheet allows high temperature resistance up to 600 °degrees, protect your working....
  • ❤Reusable & Tear Resistant - Our teflon sheets are made from super thick paper, these high-quality Teflon Paper are tear resistant and durable use....
  • ❤Wide Application - PTFE Teflon Sheets can serving as nonstick oven liners, iron clothes protector, heat press transfers and other crafting....
  • ❤Can be cut to any size - These heat transfer teflon sheet can be used for a wide variety of craft projects. Just trim teflon sheet for heat press....
Check Stock

Azzota PTFE Stirring Shaft with Foldable Paddles for stirrers, 14\ 350mm

  • PTFE Teflon Stirring Shaft with Foldable Paddles.
  • Shaft diameter: 8mm, Shaft length: 14"/350mm.
  • Paddles maximum diameter: 80mm (fully extended).
  • Polytetrafluoroethylene (PTFE) Anti-corrosion.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

CSFMC Teflon Furniture Sliders Pads(24 Pack 3/4 inch(19mm) Base),Table/Chair/Cabinet/Sofa Small Size PTFE Glides,Stainless Steel Screw on Protect The Floor,Heavy Duty Sliding Block for Furniture

  • ✅ Wide range of applications>>>>>3/4 inch(19mm)Base diameter.Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground, which will damage the PTFE layer..
  • ✅ Protect your floor>>>>>Bottom of 5.5 mm thick, protect your solid wood, tile floor and carpet, etc…Clever design, Stainless steel screw on installation, no rust.with a metal gasket embedded in the middle to prevent it from falling off..
  • ✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture slides.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..
  • ✅ Packing specification >>>>>You’ll get 24 pcs furniture slide pads. Now you can move your furniture around easily and quietly without hurting the floor..
  • ✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well..
Check Stock

CSFMC Furniture Leveler PTFE(Teflon) Bottom(28mm Base 1/4-20,8 Pack),Threaded Shank Adjust Pads,Table/Chair/Cabinet/Sofa Medium Adjustable Legs Leveling,Nuts Installation and Floor Protection

  • ✅ Keep your furniture from rocking>>>>>The adjustment slider can be adjusted from 3/8 to 1.25 inches.Let your furniture never look like a drunk again..
  • ✅ Let the furniture slide easily and quietly >>>>>Bottom contains special formulated PTFE(Teflon) material.Let the furniture slide like magic and wear well.Move furniture will not damage the floor, and quiet.protect your solid wood, tile floor and carpet, etc....
  • ✅ Strong feet support>>>>>1/4-20 x 1.5 inches High strength bolt.An antirust plating surface.More than 200 pounds of support per leg..
  • ✅ Wide range of applications>>>>>Suitable for table,chair,cabinet,sofa,wardrobe, etc.Note: There should be no sand or metal debris on the ground when sliding, otherwise the PTFE layer will be damaged..
  • ✅ Quality assurance>>>>>CSFMC is a professional manufacturer of PTFE (Teflon) furniture sliders.When you feel that the product is not your ideal, we unconditional return refund guarantees.Your satisfaction is our pleasure..
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock