ReviewsPtfe Teflon Tube

2 Sets Mouse Skates&Mouse Feet&Mice Feet&Mice Skatez&mouseskates Replacement for Razer Mamba 2015 Chroma 5G / Mamba Tournament Edition Gaming Mouse

1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..

Check Stock

Creality Official Capricorn Bowden PTFE Tubing Teflon Tube XS Series 1 Meter for 1.75mm Filament with Mold Spring,Pipe Cutter,M6 M8 Pneumatic Joint for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro

IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....

Check Stock

HUYUN Generic Mouse Skatez & Mouse Feet & Mice Feet & Mouse Skates & for Logitech G102/G PRO Gaming Mouse(Come with 2 Sets)

1.Packing: X2Sets mouse skates , thickness is only 0.8mm (including rubber layer 0.1mm).
2.Helps Protect Your Original Feet From 100% Original Hotline Games Product，Smooth gliding Ensured From 100% Original Hotline Games Product..
3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..

Check Stock

Teflon Sheet for Heat Press Transfer Sheet 18 Pack Non Stick 12'x16' Heat Transfer Paper Heat Resistant Craft Mat

Quantity Size:18 pieces of 12''x16'' PTFE board. Weight:About 17 g.
High Temperature Resistance:Heat press teflon sheet is made of high temperature and waterproof glass fiber,allows high temperature resistance up to 518℉degrees.
Water Repellent:Our PTFE teflon sheets are easy to clean, wipe with wet cloth only, rather than repeat like washing clothes, but do not prevent oil, alcohol, acrylic paint, etc., will penetrate.
Reusable and Non-stick:Our 18 packs teflon sheet for heat press reusable,non-stick treatment on surface,easy to use.
Multi-purpose:The teflon sheet for heat press can be used as barbecue pad, non-stick oven inner gallbladder, ironing protector, hot pressing transfer printing, ironing board, very suitable for baking, barbecue, cooking, barbecue, baking, pressing, ironing, painting and other technical items.

Check Stock

HUYUN 2 Sets Mouse Skatez & Mouse Feet & Mice Feet & mouseskates Replacement for Logitech G502 Proteus Core / G502 Proteus Spectrum / G502 Hero Wired Mouse

1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..

Check Stock

Butyl Tape Tile Shower Repair Tape, Fiberglass Porcelain Ceramic Repair Crack Holes, Scratches and Dents, Wall and Tile Waterproof Tape (2inx 16.4Feet)

Teflon tape has a sealing function to prevent the leakage of water or gas..
Each roll of teflon tape has a width of 1/2 inch and a length of 520 inches, which can be used multiple times..
Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance,tephlon tape is widely used in home and office..
This tape is made of PTFE material, which has high sealing and durability..
You will get 4 rolls of ptfe tape in one package..

Check Stock

SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

Teflon Tube - outside diameter 4mm, inside diameter 2mm.
it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260.
PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
Compatibility: compatible with all 1.75mm PLA ABS 3D printer.
Attention - small 3D printer accessories, please keep away from children.

Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
NTC connector with terminal, easy to intall..
【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..

Check Stock

High Temp Tape, FORTSPANG PTFE Coated Fiberglass Teflon Tape, High Temperature Adhesive Tape, Drying Conveyor Belt; Welding Sealing Tape Heat Resistant Up to 300℃ (50mmx10m)

【Material】Teflon tape / PTFE roll with self-adhesive back. Width: 50 mm.
【High quality】Our Teflon tape is pressure-resistant, corrosion-resistant, abrasion-resistant, high-temperature resistant, smooth surface, low-friction. High temperature resistance from -196 ° C to 300° C..
【Widely used】Ideal for a variety of home and commercial projects such as high speed sealing machine, food packaging, hot melt machine, 3D printing, high temperature powder coating, etching etc..
【Easy to use】Simply pull the tape off the roll and place it in the right place. Self-adhesive Teflon tape is easy to apply and remove without leaving any residue..
【Make sure the equipment runs smoothly】Pressure-sensitive silicone adhesive tapes offer excellent drainage properties and non-stick coated surfaces, replace deteriorated or burned-out Teflon tape / PTFE tape so that machines and equipment can run smoothly and efficiently..

Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....

Check Stock

Foamnseal FNS 500 Polyurethane Foam Dispensing Gun / Tool

■ PTFE coated, stainless steel canister adaptor, needle and check valve. TEFLON coated gun body and barrel for easy foam canister loading and....
■ Accepts Great Stuff Pro, Handi-Foam, Handi-Seal, Touch ‘n Foam and Touch ‘n Seal foam sealants with a screw-on top.
■ Adjustable foam output knob allows pinpoint dispensing and variable foam bead size control from 1/8" to 3" (0.3 cm to 8 cm). Foam shut off....
■ Smooth needle nose dispenser tip for use for easier cleaning and for use with plastic straw tube extenders for foaming hard to reach areas or....
■ Less foam waste when compared to foam sealants with straw dispensers. No post-dispensing foam drip. Restartable for up to 30 days..

Check Stock