ReviewsPtfe Thread

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
Package Inclued: 2 pcs x 6AN straight swivel hose ends.
EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

【2ml Vial Material】: 9mm Screw Thread Autosampler Vials are made of USP Type 1, Class A Borosilicate Glass with very low expansion coefficient,conforming to USP Type I and ASTM E438, Type I, Class A requirements.
【9-425 Vial Dimension】: 2ml, 12*32mm, 9-425 screw top vials is 40% larger opening than standard narrow opening vials..
【9mm Cap Reusable】: 9mm Ribbed Screw Cap with PTFE/Silicone Septa with PTFE chemically inert before being penetrated and strongest repetitive sealing ability-recommended for multiple penetration sampling..
【Vial Insert Volume】： The Maximum Volume is 300ul ,Standard Volume is 250ul.

HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..

... the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion..
4 Pcs Upgraded Bed-Level SpringsThe die springs are stiffer than ordinary spring, making bed levelling easier and stronger than the stock ones, and help your 3D printer much more stable while printing. If you have any questions and concern, please feel free to contact with us. Our after-sales technical team will provide you with detailed solutions within 24 hours..

LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions..
ATANDARD UNIVERSAL VIALS - Our HPLC sample vials is 12mm Diameter, 32mm Height, compatible with Agilent (1042, 1050, 1080, 1082, 1084, 1090, 1100, 5890, 6850, 6890, 7670A, 7671A, 7672, 7673A/B, 7683, 7890, 8042), Bruker (8100/8200, Marathon), Varian(Marathon), Waters, Thermo, etc..
[9-425 SCREW VIALS] - 2ml sample Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Amber vial with large writing patch for sample identification and it with ISO 9001 certificated..
PRESLIT PTFE/SILICONE SEPTA - 2ml Clear GC sample vials included blue ABS Screw Cap & Septa (Blue PTFE/White Silicone Liner). The preslit Septa can reduce flat pins curving and When collecting in large quantities, prevent negative pressure from forming in the sample bottle. It is highly recommended to use pre-opening septa for Shimadzu, Hitachi and other autosamplers with finer needle specifications.
APPLICATION - Standard Autosampler Vial for HPLC & GC Chr....

Size: AN6 to 3/8 NPT,the thread size of 6AN is 9/16-18UNF..
Material: Made of aluminum alloy 6061-T6, anodized black surface..
Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
3/8 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Designed to detect the amount of oxygen in the exhaust system , thread diameter - 18 mm.
Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing.
Manufactured with precision to meet OE standards.

Non-hardening thread sealant containing PTFE plus synthetic fibers.
These fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance.

Compatible with all GM LS series engines.
Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE，and 1 steel braided hose ..
Can be installed on the front or rear of the cylinder heads.
not compatible with FAST 102 intake manifolds.

Size: AN6 to 1/4 NPT,the thread size of 6AN is 9/16-18UNF..
Material: Made of aluminum alloy 6061-T6, anodized black surface..
Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
1/4 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..