ReviewsPtfe Tube 75mm

Capricorn XS Series Teflon Tube Bowden PTFE Tubing 3 Meters with 4Pcs PC4-M6 4Pcs PC4-M10 Fittings and PTFE Tube Cutter for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1.75mm Filament

【Creality Capricorn Tube】----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary....
【Lower Friction】----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for....
【High Temperature Resistant】----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher....
【Upgrade Your 3D Printer】----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series....
【Wide Compatible】----Creality Capricorn Bowden PTFE Tubing Tube XS Series 3 Meters 1.75MM Filament For Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S....

Check Stock

Creality Capricorn Bowden Tubing 1M Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

GENUINE UPGRADES: Creality Capricorn XS Serious Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less....
COMPATIBLE WITH MORE FILAMENTS: This bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher....
SMOOTHER FILAMENT OUTPUT: Designed for 1.75mm filament, Creality capricorn tubing has extremely accurate inner & outer diameter, and filament loads....
BEST ENDER SERIES ACCESSORIES: Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is....
GREAT PACKAGE: Package comes with two PC4-M6 fittings for the extruder and two PC4-M10 coupler for the hot end, Its 4mm inner diameter is used for the....

Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters – White Connector Tubing for 3D Printer

IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality..
LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping..
AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!.

Check Stock

uxcell PTFE Ball, 19mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

PTFE Ball: 19mm/0.75-inch Diameter Polytetrafluoroethylene Balls..
PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
Inert to most liquids and vapors, and usable to 550F..

Check Stock

Creality Capricorn Bowden Tubing Upgrade 1M Capricorn PTFE Teflon Tube for 1.75mm Filament of Ender 3/3 Pro/5 CR-10 4pcs Hot Bed Mold Springs 2 Pair Pneumatic Coupler 1 Clipper 5pcs 0.4mm Nozzles

100% Original Capricorn XS Series tubing..
Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..

Check Stock

Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube

【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver.
【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle.
【Premium PTFE Tube-High】The Capricorn Bowden PTFE Tubing has a 1.9mm ± 0.05mm inner diameter, reducing any excess wiggle room and preventing the filament from buckling inside of the tube.
【Cube Frame 3D Printer】Ender 5 Pro has a rigid extruded aluminum cube frame, making it very sturdy when assembled properly, which goes a long way to increasing print quality.
【1-year warranty】We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to contact us via Amazon, we will offer professional instructions and solutions timely..

Check Stock

Creality Capricorn Bowden PTFE Tubing XS Series 1 Meters 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Ender 3 Ender 3 Pro Ender 3 V2,Ender 5 CR-10/10S 3D Printer

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
If you have any question,please feel free to contact,we will help you.

Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
Suitable For Creality ender 3/ender 3 Pro.

Check Stock

DONLAB MFC-R-6F Glass 6 Ports Single Manifold Vacuum Gas Distributor with 2mm PTFE Stopcocks and Right Air Nozzle

Single-tube manifold vacuum gas distributor 6 ports with 2mm PTFE stopcocks.
The outer diameter of the main tube is 28mm..
The side gas nozzle is 10mm O.D. and the lower stopcocks gas nozzle is 10.5mm O.D..

Check Stock

Archetype QIDI Technology High Temperature Stainless Steel Nozzles with High Temperature PTFE for All QIDI TECH 3D Printers All Sizes (2pcs) (36mm (X-Max/X-Plus/X-One/Qidi Tech I))

QIDI TECHNOLOGY High Temperature (.4mm) Stainless Steel Nozzles & High Temperature Capricorn PTFE Tubing..
Wear resistant Stainless Steel Nozzles & Capricorn PTFE - regarded as the highest quality to withstand printing High Temperature filaments such as ABS, Nylon, Poly-carbonates and more..
Available for ALL QIDI Technology 3D Printers & ALL PTFE Sizes (i-Fast/i-Mate/i-Mates/X-Max/X-Plus/X-Pro/X-Maker/X-Smart/X-One/Qidi Tech I).
Package includes: (2Pcs) Stainless Steel Wear Resistant Nozzles - (0.4mm) (2pcs) Capricorn PTFE tube: (All Sizes).
Same Day Shipping before 2:00 P.M. Central Std. Please feel free to contact us at any time for additional Nozzle and PTFE sizes. We will gladly provide custom solutions tailored to any request. We will reply to you within 24 hours..

Check Stock

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

...replacement stock hotend from Creality is a plug and play replacement or spare unit for all Creality brand printers including Ender series as well as the CR series printers. See product description for more info on CR series. Also included are some extra brass nozzles, a hotend sock and upgraded Capricorn PTFE tubing which drastically improves the performance of this part over its standard PTFE option..
Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Capricorn PTFE is also manufactured to the highest specifications for 1.75mm filament to ensure that there is no space in the tube once the filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese manufactur....

Check Stock