ReviewsPtfe Tube For 75mm Filament

Aokin 10 Pcs PC4-M6 Pneumatic Fitting and 10 Pcs PC4-M10 Pneumatic Fitting for Creality Ender 3/3 Pro/3 V2 Ender 5/5 Pro/5 Plus CR-10/10S etc

Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Easy to Install: the extruder fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube and....
PC4-M6 fitting: copper and plastic material, durable and sturdy.
Thread: 6 mm, inner diameter(blue end): 4mm, fit for the tube whose outer diameter is....
PC4-M10 fitting: stainless steel and plastic material, anti-oxidation, anti-corrosion, and high hardness.
Thread: 10 mm, inner diameter(black end):....
Aokin 3D Printer accessories use high-quality raw materials and fine workmanship, If you have any questions about our product, please feel free to....

Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
Size: 3x4mm (IDxOD), Fit for 3mm filament.
Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..

Check Stock

Capricorn XS Series Teflon Tube Bowden PTFE Tubing 3 Meters with 4Pcs PC4-M6 4Pcs PC4-M10 Fittings and PTFE Tube Cutter for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1.75mm Filament

【Creality Capricorn Tube】----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary....
【Lower Friction】----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for....
【High Temperature Resistant】----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher....
【Upgrade Your 3D Printer】----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series....
【Wide Compatible】----Creality Capricorn Bowden PTFE Tubing Tube XS Series 3 Meters 1.75MM Filament For Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S....

Check Stock

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

100% Original Capricorn XS Series tubing..
Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..

Check Stock

Creality Capricorn Bowden Tubing Upgrade 1M Capricorn PTFE Teflon Tube for 1.75mm Filament of Ender 3/3 Pro/5 CR-10 4pcs Hot Bed Mold Springs 2 Pair Pneumatic Coupler 1 Clipper 5pcs 0.4mm Nozzles

100% Original Capricorn XS Series tubing..
Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..

Check Stock

BIQU Equipment 1 Spool Filament Mount Rack Bracket for PLA/ABS Filament 3D Printer

Made of high quality acrylic, stable, durable.
The holder tube is made of 3d pla filament.
Peel off the sticker before you assemble it.
Suit for 1Kg PLA ABS 1.75mm 3.0mm 3d printer filament.
1PC 3D Filament Mount Rack（Not including the filament).

Check Stock

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

100% Brand New and All parts are tested and quality controlled prior to shipment..
Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..

Check Stock

Creality Capricorn Bowden PTFE Tubing XS Series 1 Meters 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Ender 3 Ender 3 Pro Ender 3 V2,Ender 5 CR-10/10S 3D Printer

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
If you have any question,please feel free to contact,we will help you.

Check Stock

HATCHBOX ABS 3D Pen Filament, Dimensional Accuracy +/- 0.03mm, 1kg Total, 1.75mm, 16 Color Sample Pack

Package Includes: 1 - Set of 16 HATCHBOX ABS Pen Filaments.
See your ideas transformed into a real and rewarding reality with the HATCHBOX 1.75mm 3D Printing Pen ABS Filament Sample Mix, featuring a mixed set of 16 different filament colors. Our ABS filaments include: 10 of Hatchbox’s most popular ABS Color Filaments (black, blue, green, gold, orange, purple, red, silver, white and yellow), Glow-in-the-Dark Filament (blue, green) and Transparent Filament (black, white, red, blue). Made for both 3D printer pen and 3D printer use..
ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant.
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm, 0.44lbs Total).
Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F).
Use With Heated Build Platform Is Recommended.
New convenient tube packaging means your 3D filaments are ready to go as soon as you unwrap them. No more struggling with rolled up filaments curling in on themselves as you feed it into your 3D Printer or 3D Printing Pen..

Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....

Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
Teflon tubes are made of premium PTFE material, unique....
Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..

Check Stock