ReviewsPtfe Tube Moulding Machine

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD 1.5 Meters – White Connector Tubing for 3D Printer

IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....

Check Stock

Creality Capricorn Bowden Tubing Upgrade 1M Capricorn PTFE Teflon Tube for 1.75mm Filament of Ender 3/3 Pro/5 CR-10 4pcs Hot Bed Mold Springs 2 Pair Pneumatic Coupler 1 Clipper 5pcs 0.4mm Nozzles

100% Original Capricorn XS Series tubing..
Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..

Check Stock

Creality Capricorn Bowden PTFE Tubing XS Series 1 Meters 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Ender 3 Ender 3 Pro Ender 3 V2,Ender 5 CR-10/10S 3D Printer

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
If you have any question,please feel free to contact,we will help you.

Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
Size: 3x4mm (IDxOD), Fit for 3mm filament.
Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..

Check Stock

Dovov Heat Press 15x15, Clamshell Heat Press with Digital Controller, Sublimation Heat Press Machine for T shirt

Fine Pattern Presentation: The heating plate of Dovov heat press 15x15 is triple polished, with high-quality PTFE spraying, smooth and non-stick ink, so that the transferred pattern has clearer details..
Even Heat Distribution: The heating tube is 20% thicker to 0.63 inches, and the third generation of heating tube arrangement controls the global temperature difference of the heating plate within 15 °F/8 °C..
Precise Digital Control: Intelligent temperature control boxes and sensors accurately control the gap between the set temperature and the actual temperature at 13°F/7°C. Setting range: 0-482 degrees Fahrenheit, 0-999 seconds, Power: 1400w..
Safe and Durable: the double-layer metal grip load-bearing reached 450KGF, eliminating the possibility of grip breakage in daily use.
the opening angle reached 45-50 degrees, which is convenient to take and place clothes, not easy to be burned.
overheating automatic closing device to avoid fire and other accidents..
Easy to Use: The temperature range of Dovov heat press machine is suitable for a wide range of situations such as cotton, linen, fabric, heat transfer, heat sublimation, etc., and the 15x15-inch plate size can also meet the vast majority of heat press jobs..

Check Stock

Laboy Glass 250mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines with 24/40 Joint at Top & 2mm PTFE Stopcock Chemistry Lab Glassware

...ry cylindrical dropping funnel and pear-shaped separatory dropping funnel,it is designed with an additional glass tube at side from the top of cylindrical body to the tube between the stopcock and lower male joint.The funnel features a graduated cylindrical tube as main body,with standard joints at top and bottom,a PTFE stopcock above the lower joint..
ADVANTAGE---A pressure equalizing funnel is used to add exact amounts of liquid to the receiving flask slowly and smoothly.With the side narrow-bore tube,the liquid form the funnel drops smooth without having to remove the glass joint stopper.In a reflux reaction,the funnel will be attached to one neck of the receiving flask,while the reflux condenser will be placed on the other neck.It is also ideal to handle air-sensitive reagents in a sealed,inert-gas environment..
DIMENSIONS------This graduated addition funnel has a capacity of 250mL,with 24/40 top and bottom joints, with a 4mm PTFE stopcock above the lower male joint..
HEAVY WALL ---This dropping funnel is heavy-wall designed , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in C....

Check Stock

Lucas Oil Marine Grease/12x1/ 1 lb Tub

Marine Grease 2-4-C with PTFE is a high-quality, versatile lithium‑based NLGI 2 grease that won’t break down in the presence of water.
Excellent general-purpose teflon grease for steering system cables, throttle and shift cables, tilt lock mechanisms, tilt tube, remote controls, prop shaft, swivel pins and trailer wheel bearings.
Contains extreme pressure additives to withstand friction in a wide variety of heavy equipment applications and temperatures.

Check Stock

Krytox RFE PFPE High Performance Lubricant, 2 oz Tube, White

Resistant Properties: Chemical-Resistant.
Maximum Operating Temperature: +500 degF.
Storage Condition: Store Away From Heat, Sparks and Open Flame.

Check Stock

Creality Official Capricorn Bowden PTFE Tubing Teflon Tube XS Series 1 Meter for 1.75mm Filament with Mold Spring,Pipe Cutter,M6 M8 Pneumatic Joint for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro

IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....

Check Stock

Capricorn XS Series Teflon Tube Bowden PTFE Tubing 3 Meters with 4Pcs PC4-M6 4Pcs PC4-M10 Fittings and PTFE Tube Cutter for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1.75mm Filament

【Creality Capricorn Tube】----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary....
【Lower Friction】----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for....
【High Temperature Resistant】----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher....
【Upgrade Your 3D Printer】----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series....
【Wide Compatible】----Creality Capricorn Bowden PTFE Tubing Tube XS Series 3 Meters 1.75MM Filament For Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S....

Check Stock

Sterling Seal SSI7530.SM2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/64\

DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.

Check Stock