ReviewsPtfe Tubing And Fittings

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock

Creal Genuine Capricorn Tubing 1 Meter XS Series 1.75MM Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3Pro Ender 5 CR-1010S 3D Printer

  • ( Bowden Tubing)100 percent Genuine Capricorn Bowden PTFE Tubing..
  • (High Temperature Resistant) High Temperature Resistance due to using only the highest quality Capricorn PTFE. Our tubing will operate at even higher....
  • (Lower Friction) High lubricity additives make XS Series Capricorn tubing the lowest friction bowden on the market. It developed specifically for....
  • (Professional accessories)PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and....
  • (Upgrade Your 3D Printer)-- Premium XS Capricorn bowden Tubing is officially authorized and d quality.Using Original XS Series tubing make less....
Check Stock

Creality Official Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with Tube Cutter Nozzle Cleaning Needles and Extra Nozzles for Ender 3/3 v2/3 pro CR-10 Series/10S 3D Printer

  • 1*1 Meter 100% Original Capricorn XS Series tubing. Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing and....
  • 10*MK8 nozzles in 4 sizes (quantity x output diameter): 1x0.2mm, 3x0.3mm, 2x0.4mm, 2x0.5mm, 1x0.8mm, 1x1.2mm with 5PCS Stainless Steel Nozzle Cleaning....
  • 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

Irrigation Fittings Kit Hoomtry Drip Irrigation Barbed Connectors for 1/4-Inch Tubing Flower Pot Vegetable Garden Lawn(Straight Barbs Tees Elbows End Plug 4-Way Coupling)

  • Plastic 1/4 Irrigation Fittings Kits: 208 Pcs 1/4 inch drip irrigation tubing kits total, 80 straight barbs, 68 three-way pipes, 20 elbow fittings, 20 end plugs and 20 four-way pipe joints, the number is sufficient to meet your needs for garden irrigation accessories various needs..
  • No tool required: The lrrigation fittings kit secure, Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection.
  • Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
  • Confirm Drip Irrigation Tubing Size: These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.Please check the size carefully before purchasing..
  • Easy to Use: This irrigation fittings kit is made of quality engineering plastics that is durable, strong, water resistant, chemical-resistant for long time using. These drip irrigation accessories work well with the tubing..
  • Excellent customers service: You are not completely satisfied with Hoomtry plastic drip irrig....
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】:Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】:Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】:Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

Capricorn XS Series Teflon Tube Bowden PTFE Tubing 3 Meters with 4Pcs PC4-M6 4Pcs PC4-M10 Fittings and PTFE Tube Cutter for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1.75mm Filament

  • 【Creality Capricorn Tube】----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary....
  • 【Lower Friction】----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for....
  • 【High Temperature Resistant】----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher....
  • 【Upgrade Your 3D Printer】----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series....
  • 【Wide Compatible】----Creality Capricorn Bowden PTFE Tubing Tube XS Series 3 Meters 1.75MM Filament For Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S....
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

mistcooling Pre-Assembled, Low Pressure System Kit,25' Mist Ring,Recommended for Fans with 30-46'' Di, 25 Inch Diameter 8 Nozzles, Beige Color Tubing

  • 8 - Nickel-plated brass Nozzles, 7 misting Line Tubing,1 - 6 ft feed Line,1 - end elbow, 7 - misting tee, 8 Zip ties.
  • Nozzles:Nickel-plated brass button series ,With stainless-steel Orifice ,Standard 10/24” thread ,in 0.015” OD Orifice ,Rust-resistant fixed impeller pin.
  • Fittings :¼” OD Compression Fittings,Beige Color to blend with most patios and backyards,Compression Type Fittings,Leak Proof.
  • Garden Hose Adapter : ¾” OD, Fits most Garden Faucets ,With Filter Washer to protect your nozzles.
  • Tubing :¼” OD Flexible PE Tubing ,Operating Pressure 40 to 100 PSI ,UV Resistant Flexible Tubing.
  • 25'' Fan Mist Ring with 8 or 10 Nozzles -Recommended for fans with 30-46'' Diameter.
  • Supply Line : 6 Ft Feed Line, Low Pressure tubing , Beige Feed Line.
  • Simply fix to your garden hose and ready to use.
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock