ReviewsPu Air Tube

mxuteuk 5pcs Push to Connect Tube Fittings Pneumatic Male Straight 3/8\ Tube OD x 1/4\ NPT Thread PC-3/8-02

  • Type: Male Straight, Size: 3/8" Tube OD x 1/4" NPT Thread.
  • Working Temperature: 0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC.
  • Made of quality plastic and stainless steel for durable use.
  • Easy to install and removed, offering good seal property.
  • Package Content : 5pcs x Pneumatic Fittings.
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Beduan Push to Connect Fitting, 1/2' Tube OD x 1/2' NPT Thread Male Straight Pneumatic Air Fitting (Pack of 5)

  • Body Style: Male Straight / Size:1/2” Tube OD x 1/2“ NPT thread Straight push in connect fitting.
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
  • Working Pressure:1.0Mpa | 145psi.Seal O-ring:NBR.
  • Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg.
Check Stock

Beduan Push to Connect Fitting 3/8 Tube OD x 1/4 NPT Thread Male Straight Pneumatic Air Fitting Pack of 10

  • Body Style: Male Straight / Size:3/8” Tube OD x 1/4“ NPT thread Straight push in connect fitting.
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
  • Working Pressure:1.0Mpa | 145psi.Seal O-ring:NBR.
  • Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg.
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock

VETLEY PNEUMATIC Black Air Straight Union 1/4 Inch Tube OD Check Valve Quick Release Push to Connect Fitting CVPU1/4 Pack of 2

  • 1.Product Name: Air Straight Union Check Valve.
  • 3.Product Material:Nickel-plated copper,Plastic.
  • 4.Working Temperature:32~160 °F / 0~70°C.
  • Working Pressure:0~150 PSI / 0~9.9kgf/cm2(0~990 kPa).
  • 5. Application of Tube:PU/PE/PA/PVC/Nylon/PTFE.
Check Stock

Lekit Misters for Outside Patio 89FT(27.3M)+34 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable Outdoor misting Cooling System for Garden, Waterpark, Greenhouse, Backyard

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

Lekit Misters for Outside Patio 27.5FT(8.4M)+8 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable Outdoor misting Cooling System for Garden, Waterpark, Greenhouse, Backyard

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

TAILONZ PNEUMATIC 1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit 10 Spliters+10 Elbows+10 tee+10 Straight 40 pcs

  • 【Product Name】1/4 ‘’ Plastic Push to connect fittings (40Pcs).
  • 【Fluid Type】Air Only【Applicable Tube】Pu/Nylon/Soft PE tube.
  • 【Pressure Range】0~145Psi【Temperature Range】0-60°C | 32～140°F.
  • 【Advantages】High pressure resistance, easy installation and long service life..
  • 【Others】Easy to install: Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
Check Stock

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4\ Tube OD x 1/8\ NPT Thread

  • Made of quality plastic and stainless steel for durable use.
  • Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
  • Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
  • Working Temperature: 0-60°C | 32～140°F.
Check Stock

10 Pack Push to Connect Air Fittings 90 Degree Pneumatic Tube Fitting Male Elbow 1/4 Tube OD x 1/4 NPT Thread

  • Made of quality plastic and stainless steel for durable use.
  • Easy to install and removed, 360-degree rotate freely, release rings adopt ellipse design, offering good seal property.
  • Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
  • Working Temperature: 0-60°C | 32～140°F.
Check Stock