ReviewsPull Lever Keg Tap

Kegco Dual Tap Tower Kegerator Conversion Kit, None

Kegco Standard Dual Tap Tower Conversion Kit includes everything you need to convert a refrigerator or freezer into a dual tap keg dispenser.
Kegco two product dual gauge regulator displays both PSI and CO2 volume and features a large, easy-to-use adjustment knob.
NSF-approved Kegco KT85D-L "D" system keg couplers has a convenient lever handle design and is designed for use with all domestic brand American "D" system Sankey kegs.
3" diameter air-cooled chrome-plated metal draft tower comes complete with two NSF-approved chrome-plated metal faucets, two faucet knobs, and two 5' lengths of 3/16" I.D. beer line.
Includes an empty 5 lb. aluminum CO2 tank made from high strength aluminum alloy, which is lighter than steel tanks and will not rust.

Check Stock

Kegco K199B-2P Kegerator Two Keg Beer Cooler - Premium Double Faucet D System Kit - Black Door

...ing you need to begin dispensing delicious draft beer straight from a keg. The two tap dispense system includes a brand new 5 lb. aluminum CO2 tank, a two product Kegco 542-2 Pro Series double gauge CO2 regulator, two 5 foot lengths of 5/16" I.D. draft beer line assembly with snap clamps, two Kegco KT85D-L D system lever handle keg couplers that can tap all domestic taps, and a 3" diameter draft tower..
100% STAINLESS STEEL CONTACT: The premium direct draw kit that is included with this unit features 100% stainless steel contact, ensuring that your beer will only touch sanitary stainless steel components from the keg to your glass! The probe on the keg couplers, the tower shanks, the faucets, and all of the fittings are stainless steel. This premium kit also comes with a deluxe hand pump pressurized cleaning kit that makes it easy to keep your dispense system squeaky clean between kegs..
LARGE INTERIOR: This keg cooler's spacious interior can accommodate one full size, straight pony, or quarter slim keg, and up to two sixth slim, strap handle, or rubber handle home-brew kegs (it cannot hold bevel or rubber kegs, commonly used by Miller and Coors). Two removable wire shelves are included that allow you to easily convert this keg refrigerator into an all....

Check Stock

Kegco 2 Faucet Premium Door Mount Kegerator Kit Without Tank 2PSCK-NT

...ermoplastic vinyl beer lines, these components ensure that your beer does not pick up any off flavors and tastes the way the brewery intended..
PERLICK PERL BEER FAUCET: This Perlick beer faucet has a revolutionary ball and floating front seal design that prevents beer from being exposed to air, keeping your handle lever from sticking and mold or bacteria from building up in the faucet body. The heavy-duty 304 stainless steel construction will not pint, tarnish, or taint the flavor of your beer, and it’s polished interior ensures a smoother flow with less agitation and foaming. It is even suitable for wine, kombucha, and coffee!.
DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762-2 Commercial Grade Dual Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Includes a y splitter and two independent shut-off valves for dispensing up to two kegs at the same keg pressure..
LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged....

Check Stock

G Francis Keg with Keg Regulator and Beer Dispenser, 128 oz – Portable Keg Draft Beer Dispenser, Portable Beer Dispenser

...n in, eliminates foam, and preserves coldness longer than breakable glass growler alternatives.
EASY TO USE: Assembly required and instructions included.
Remove cap, screw on top tap (with foam blocker in tab) on mini keg, screw in a 16 gram CO2 cartridge (not included), turn the flow regulator to your desired PSI, pull the tap, and let the beer flow into your glass.
When done for the night, simply turn the regulator off, leave the mini keg pressurized to preserve the beer and prevent it from going flat, and place in fridge or cooler.
PACKAGE CONTENTS: Mini beer keg with regulator and dispenser kit comes complete with a spear body, crossbar, twist tube, pressure relief ring, nut, white flow-control block, faucet, faucet knob, regulator, regulator base, regulator knob, gauge, and beer hose.
16g CO2 capsule and CO2 cartridges not included.
For best results, use beverage grade CO2 cartridges (not all CO2 cartridges are made to be suitable for beverages).
Included O-rings are extras, not for initial assembly.

Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

... Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
12″ SURFACE MOUNT STAINLESS STEEL DRIP TRAY: Designed with style and convenience in mind, this drip tray is constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..

Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit w/ 5 lbs Co2 Tank - EBDTCK-542_5T

... Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
STAINLESS STEEL SINGLE FAUCET DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter draft beer tower has a beautiful polished stainless steel finish and comes complete with a chrome plated brass faucet with solid brass lever. 5′ of 3/16″ clear beer tubing with nozzle and hex nut assembly and a mounting gasket with screws are also included for quick and easy setup..

Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

...auge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers,....

Check Stock

Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank, Standard

...ock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line..
CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear..

Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

...tor packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what’s left in the Co2 tank, so you don’t run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for ....

Check Stock

Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard

...auge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use.
simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting..

Check Stock

Kegco Deluxe Two Keg Door Mount Kegerator Conversion Kit w/ 5lbs Tank

... that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Includes a y splitter and two independent shut-off valves for dispensing up to two kegs at the same keg pressure..
LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our popular 10″ wide door mounted drip tray’s clean design and reliable stainless steel construction make it easy to enjoy delicious draft beer every day – mess-free! Installation is simple, thanks to the two conveniently placed screw holes on the backsplash. When it’s time to clean, the top vent can be removed for easy access. Because this drip tray does not have a drain, you will need to e....

Check Stock