ReviewsPull Stud Collet

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..

Check Stock

MOSTPLUS 28mm Exhaust Pipe Expander Stretcher Tool Set 1-5/8" to 4-1/4", Expander Tool for Tail Pipe Tube with Storage Case

[ Package Include ] --- 1 x Exhaust Pipe Stretcher Expander Kit & 1x Carry Case.
[ Material ] --- All collets are made of Aerospace-grade 6061 Aluminum, while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity then extended service life.
[ Function ] --- Used to expand the low-carbon steel exhaust pipe, and make the exhaust seal with a smaller diameter pipe.
[ Expanding Range ] --- The exhaust pipe stretcher offers various collets for a broad expansion range includes: Steel expander 1 5/8"-2" Collet.
[ Easy Opeartion ] --- Choose a proper collet, clamp the pipe, then expand the pipe. Use 1/2" or 3/4" impact wrench will save more effort.

Check Stock

Fumrtcy Exhaust Pipe Expander Stretcher Tool Kit 1-5/8' to 4-1/4', Muffler Pipe Spreader Tool Set for Tail Pipe Tube

Function --- Used to expand the low-carbon steel exhaust pipe to make perfect exhaust seals with smaller diameter piping..
Material --- All collets are made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment, ensuring rugged rigidity then extended service life.
Wide Expandinig Range --- In the tool set offers various collets, To extend the exhaust pipe from 1-5/18" to 4-1/4". Includes:Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
Easy Opeartion --- First step: Choose the proper collet. Second step: clamp the pipe. Third step: and then expand the pipe. Use a 1/2" or 3/4" impact wrench to save even more effort.Operation of our stretcher kit is really that simple!.
Service Guarantee --- We hope to bring you a satisfying shopping experience. If you have any question, please feel free to let us know.Hope you can find what you want here and enjoy your shopping..

Check Stock

Prokomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube

◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..

Check Stock

Mophorn Stud Welder Kit 1600A Stud Welder Dent Repair Kit 800VA Spot Welder Stud 110V Welder Stud Kit Stud Gun Dent Puller Kit with Complete Accessories Dent Welder Repair for Auto Body Repairing

... hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of cast iron slide contributes to comfortable grip..
One-handed Simple Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state..
Useful Accessories Included: This stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small in size and can be used flexibly in any position. The tool box makes the welding accessories neat and portable..

Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..

Check Stock

1/4 Inch Shank Router Collet Extension Rod Chuck Holder Extender Adapter Woodworking Milling Bit Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet 6.5mm 12.7mm, ER20 M Type Wrench Spanner

... quality material, durable and practical to use.
High strength, good toughness, strong shock resistance. Make you more efficient to process products, suitable for woodworking trimming, milling, engraving machine..
Shank Diameter: 1/4"(6.35mm), Accept Shank Size: 1/4" & 1/2" Shank, Extend Length: 2-1/4".
This router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. Extend the bit to provide the full depth of cut and eliminate the dangerous..
Easy to Use- Place the router collet extension shank in the 1/4-inch router collet and the router bit shank in the extension collet and tighten both.
M Type ER20M wrench included. Need M Type ER20M wrench to tighten the collet..
Eliminate the dangerous temptation of withdrawing the shank from the collet, extend the bit to provide the full depth of cut instead of short shanking your router bits. Widely used, boring, milling, drilling, silk attack, sculpture, CNC, and other processing, for professionals and hobbyists demanding..
Package including: one 1/4 Inch shank collet extension, one ER20 6.5mm Collet, one ER20 12.7mm Collet, one M Type ER20M wrench.If you're not satisfied with our products for whatever reason, just contact us, we will try our best. Do not hesitate, p....

Check Stock

US Cargo Control Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..

Check Stock

DNA MOTORING TOOLS-00202 1-5/8 to 4-1/4 Inches Exhaust Pipe Expander Stretcher Tool Set with Rubber Rings for Automotive Car Tail Pipe Tube Repair

...s carried out by our highly qualified specialists. We test the material's strength and durability to guarantee that the tools arrive completely prepared for their intended use at the consumer's end..
PIPE EXPANSION KIT - This exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4" which can satisfy your needs easily and efficiently. Great for professional auto shops or home DIY..
CONVENIENT TO CARRY - The exhaust expander tools includes common tools needed to solve exhaust pipe expansion work. All parts are smartly placed in molded tool box for quick organization and convenient storage..
EASY OPERATION - Impact driven heavy-duty expander allows for fitting smaller exhaust piping and making exhaust seals. Easy to use, choose the proper collet, clamp the pipe, and then expand the pipe. Note: Use impact wrench to save even more effort..
PRODUCT SPECIFICATIONS - 1-5/8 to 4-1/4 Inches with a pack of rubber rings, SIZE : Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4&....

Check Stock

OMT Hex 28mm (3/4″-10 Thread) Exhaust Pipe Expander Stretcher Tool Set 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

AUTO PIPE EXPANSION KIT: This mechanic’s tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
WIDE EXPANDING RANGE: The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
EASY OPERATION: Choose the proper collet, clamp the pipe, and then expand the pipe—operation of our stretcher kit is really that simple! Use a 1/2" or 3/4" impact wrench to save even more effort. Our helpful user manual is included to guide you through the process..
HEAVY-DUTY CONSTRUCTION: All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..

Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" Size, 10 T Pedal Pump Included w/4 Dies and 2 Storing Cases for Copper, Aluminum Tubes in Car Repairing

Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
Labor-saving Hydraulic System: This muffler pipe expander forces pipes to expand by using an air hydraulic mechanism. A 10-ton air hydraulic foot pump with a 6 feet high-pressure hose makes your expansion effortless..
Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..

Check Stock