ReviewsPuller Parts

ABN 3-Jaw Gear Puller 4-Piece Set – 3in, 4in, 6in, 8in – Removal Tool Kit for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, 6, and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Pit Posse PP3078 UTV Primary Drive Clutch Puller Tool for Many Polaris Models 1985-2016 - Replaces OEM 2870506 - Life Time Warranty - Made of Heat-Treated Quality Steel - Automotive Tools

  • ✅ THE PERFECT PRIMARY CLUTCH PULLER FOR YOUR POLARIS RZR- Pit Posse’s primary clutch puller is designed to replace OEM 2870506 and engineered for accuracy. Having the wrong puller can damage the threads, don’t settle for a cheap puller that will bend and damage the components of your primary clutch. Use Pit Posse’s professional Polaris puller for a job well done..
  • ✅ DURABLE & RELIABLE CLUTCH PULLER THAT’LL LAST YOU A LIFETIME- This primary clutch puller is machined from quality steel and heat treated for superior strength and is designed to pull even the toughest of clutches. Because this puller is constructed from high-quality steel is has less friction with the machine’s threads. This simple tool is a must in your toolbox and will last you for a lifetime..
  • ✅ EASY TO USE DIY CLUTCH PULLER FOR YOUR TOOLBOX- The primary clutch puller is very easy to use, fits perfectly, and releases the primary clutch so you can work on rebuilding your clutch or performing any maintenance work on your clutch. This tool makes it possible for you to remove your primary clutch even if you’re not a mechanic..
  • ✅ OUR PRIMARY CLUTCH PULLER WAS DESIGNED TO FIT YOUR POLARIS PERFECTLY- This Polaris clutch puller is designed for most Polaris models 198....
Check Stock

VEVOR Carrier & Pinion Bearing Puller Compatible with Dana 30,40,50,60,70, 80, Ford 10.25  Bearings Pinion Puller Tool with 3 Clamshells 45# Steel Clamshell Bearing Puller for Auto Repair

  • Great Compatibility: The clamshell carrier bearing puller is compatible with Dana 30, 40, 60, 70, Ford 10.25" bearings. With the clamshell bearing puller, you can quickly remove the bearings. In addition, its power is evenly distributed, so less damage will be brought to your pinion bearings..
  • Premium Performance & Features: With high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface..
  • Complete Equipment: All necessary parts are ready for you. There is a main puller body, plug, center bolt, 3 clamshells, retaining ring, and adjuster rings. Besides, this unit comes with a handy stand, so you can group all the working parts together..
  • Easy to Operate: There is no need for other complex working tools. Firstly, place the main body over the plug and adjust the lower and upper adjusting ring. Secondly, select a proper clamshell and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing..
  • Superior Material: The clamshell bearing tool is made of durable 45# steel, providing good performance in withstanding abrasion, corrosion, and impa....
Check Stock

Acoustic Guitar Bridge Pins Puller Pulling Remover Extractor Tool with Guitar Saddle Nut and 12 Pack Guitar Bridge Pins

  • Function: the guitar removal tool is designed to pull the bridge pin directly without damaging the guitar.
  • And the bridge pins are small and exquisite, useful spare parts for guitars.
  • Reliable Guitar Puller: the bridge pin puller is made of good quality alloy.
  • It is lightweight and portable, a beautiful accessory for your guitar, easy to use.
  • Suitable Range: the guitar puller fits most standard bridge pins and serves as a puller, extractor and removal tool to replace acoustic guitar bridge pins.
  • Velvet Bag: the package comes with a velvet pouch, which is good for storage and convenient carrying.
  • Package Includes: 1 guitar bridge pin puller, 1 guitar saddle, 1 guitar nut, 6 ivory guitar bridge pins and 6 black guitar bridge pins.
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

BESTOOL Gimbal Bearing Puller/Gimbal Bearing Installer tool, Boat Alpha, Bravo, Omc Gimbal Bearing Puller Remover, Engine Alignment General Tool for Heavy Duty Bearing Puller

  • DURABLE & STURDY:Our gimbal bearing puller is made premium material. The color is black and oxide finish on all the parts to it..
  • EASY REMOVAL:This gimbal bearing remover tool allows easy removal of the Gimbal bearing..
  • BLIND HOLE PULLER:The blind hole puller locks into the inner race of the bearing..
  • EASY TO USE:This gimbal bearing puller remover is easy to use, turn the end of the tool with a wrench..
  • WIDE APPLICATION:Our gimbal bearing puller fits for Mercruiser Alpha, Alpha 1, MR, Bravo's, OMC Cobra's, Volvo's..
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

OTC 7393 Gear and Pulley Puller with 5-1/2' Long Forcing Screw

  • OTC's 7393 Gear and Pulley Puller is perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes.
  • Puller features a spread of 1-1/2 inches to 4-1/4 inches.
  • includes 2 ea. 3/8-16 x 3 inch long hex head cap screws.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock