ReviewsPulley Bearing Replacement

Stens 255-312X Xtreme Electric PTO Clutch X0558

  • Xtreme Torque Series, High Torque Cool Coil Upgrade, High Temperature Bearing Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness.
  • Specs: 1.000" Crankshaft, 5.355" Pulley, Counter Clockwise, A/B Belt, 70 ft. lbs. torque.
Check Stock

Stens 255-222X Xtreme Electric PTO Clutch X0336

  • Cool Coil Technology, High Temperature Bearing Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight, Impact resistant Wire Harness.
  • Specs: 1.000" Crankshaft, 6.31" Pulley, Clockwise, A/B Belt, 125 ft. lbs. torque.
  • OEM: JOHN DEERE AM141833 WARNER 5219-132.
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

The ROP Shop PTO Clutch for Craftsman 917-05001, 917-1774, 917-1774B, 917-1774C Riding Mowers

  • Cool Coil Technology, High Temperature Bearing Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Specs: 1.000" Crankshaft, 6.000" Pulley, Counter Clockwise, 1/2" or 5/8" Belt, 125 ft. lbs. torque.
  • OEM: BOLENS 717-1774 OREGON 33-104 WARNER 5219-25.
Check Stock

ACDelco Professional 38340 Drive Belt Tensioner Assembly with Pulley

  • OE Replacement Belt Tensioner Assembly, Directly Fit.
  • Replacement for Dodge Dakota 1992-2003, Durango 1998-2003, Ram 1500 1994-2001, Ram 2500 1994-2003, Ram 3500 1997-2003, Ramcharger 1992-1993, W150/W250 1993.
  • Replacement for Dodge B150/B250/B350 1992-1994, B1500/B2500/B3500 1995-1998, D150/D250/D350 1992-1993.
  • Bearing Bore Inside Diameter: 17(mm): Width: 29.5(mm): Belt Type: Serpentine.
  • Reference Number: 53006497, 53010158AB, 53010158, 53010158AC, 419-301, 89215, 49216, 38116, 38116, SK89215.
Check Stock

Small Pulley Block Silent Pulley Wheel Heavy Duty Fixed Pullies Loading 176 lb for Cord Material Handling Moving and DIY Project Wall Ceiling Mount Pulleys (4 Pack)

  • ✅【Quality Small Lifting Pulley】The flat mount pulley is made of quality carbon steel and nickel plated on surface. Durable and sturdy, high strength and stability..
  • ✅【Fixed Mute Silent Pulley】The fixed pulley wheel is labor-saving and super silent, it can slide smoothly to ensure good movement of the rope and prevent the rope from twisting..
  • ✅【Maximum Load-bearing Capacity】The maximum load-bearing capacity of single pulley block is 176 pounds. Suitable for the ropes which diameter within 6mm..
  • ✅【Easy and Quick to Install】Equipped with screws and expansion pipes, the wall mounted pulley is simple to use. The install hole diameter is 5.8mm..
  • ✅【Wide Application】Widely applied to the industry and household for material handling and moving, also suitable for electric rolling door accessories and electric ceiling pully..
Check Stock

Youngneer Zipline Trolley Kit with 25kN Carabiner Double Tandem Dual Pulley for 1/4 5/16 3/8 1/2 Cable for Backyard Zipline Climbing Rescue 30KN 6700LBS

  • 【Safety & Lightweight】- This zipline trolley has been appoved by the CE certification. It has high security and stability. Adopted hot-forged aluminum-magnesium alloy shell and stainless steel ball bearing, this double trolley is very lightweight and durable, making it portable for your outdoor adventure activities..
  • 【Smooth Bearings & Large Breaking Strength】- This ball bearing pulley with dual 361 stainless steel well- polished bearing provides great smooth rotation. Its maximum rotation speed could reach to 35 m/s. This tandem pulley works far better than a single pulley. Besides, its maximum breaking strength could be reach to 30KN 6700LBS, so it can guarantee your safety at most outdoor applications such as climbing, rescue, swing seats or backyard zipline setting etc..
  • 【Coming with Carabiner】- Including an auto-locking climbing carabiner constructed by high strength stainless steel. Breaking Strength:25KN.
  • This carabiner makes your backyard zipline, swing seats, baby bouncer setting very easy. You only need to put this double pulley on your zipline, attaching the carabiner into the hole at bottom which you could to hanging swing seats or baby bouncer..
  • 【Cable Diameters】- This rescue pulley is designed for rope and cable.
Check Stock

8TEN PTO Clutch for Husqvarna AYP Ogura Craftsman Replaces 532414336 532179334 GT1A-EH07 15772 414336

  • Cool Coil Technology, High Temperature Bearing Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness.
  • Specs: 1.000" Crankshaft, 6.000" Pulley, Counter Clockwise, 1/2" or 5/8" Belt, 80 ft. lbs. torque.
  • OEM: BOLENS 717-04163 OREGON 33-133 WARNER 5217-32.
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • ... deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock