ReviewsPulley Bearing Tool

Stens 255-222X Xtreme Electric PTO Clutch X0336

Cool Coil Technology, High Temperature Bearing Upgrade.
Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight, Impact resistant Wire Harness.
Specs: 1.000" Crankshaft, 6.31" Pulley, Clockwise, A/B Belt, 125 ft. lbs. torque.
OEM: JOHN DEERE AM141833 WARNER 5219-132.

Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..

Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....

Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
a 4 inch gear puller with a 5" max. reach and 4" max. spread.
a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....

Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....

Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

The ROP Shop PTO Clutch for Craftsman 917-05001, 917-1774, 917-1774B, 917-1774C Riding Mowers

Cool Coil Technology, High Temperature Bearing Upgrade.
Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
Specs: 1.000" Crankshaft, 6.000" Pulley, Counter Clockwise, 1/2" or 5/8" Belt, 125 ft. lbs. torque.
OEM: BOLENS 717-1774 OREGON 33-104 WARNER 5219-25.

Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..

Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
APPLICATION: Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.

Check Stock

Small Pulley Block Silent Pulley Wheel Heavy Duty Fixed Pullies Loading 176 lb for Cord Material Handling Moving and DIY Project Wall Ceiling Mount Pulleys (4 Pack)

✅【Quality Small Lifting Pulley】The flat mount pulley is made of quality carbon steel and nickel plated on surface. Durable and sturdy, high strength and stability..
✅【Fixed Mute Silent Pulley】The fixed pulley wheel is labor-saving and super silent, it can slide smoothly to ensure good movement of the rope and prevent the rope from twisting..
✅【Maximum Load-bearing Capacity】The maximum load-bearing capacity of single pulley block is 176 pounds. Suitable for the ropes which diameter within 6mm..
✅【Easy and Quick to Install】Equipped with screws and expansion pipes, the wall mounted pulley is simple to use. The install hole diameter is 5.8mm..
✅【Wide Application】Widely applied to the industry and household for material handling and moving, also suitable for electric rolling door accessories and electric ceiling pully..

Check Stock

Youngneer Zipline Trolley Kit with 25kN Carabiner Double Tandem Dual Pulley for 1/4 5/16 3/8 1/2 Cable for Backyard Zipline Climbing Rescue 30KN 6700LBS

【Safety & Lightweight】- This zipline trolley has been appoved by the CE certification. It has high security and stability. Adopted hot-forged aluminum-magnesium alloy shell and stainless steel ball bearing, this double trolley is very lightweight and durable, making it portable for your outdoor adventure activities..
【Smooth Bearings & Large Breaking Strength】- This ball bearing pulley with dual 361 stainless steel well- polished bearing provides great smooth rotation. Its maximum rotation speed could reach to 35 m/s. This tandem pulley works far better than a single pulley. Besides, its maximum breaking strength could be reach to 30KN 6700LBS, so it can guarantee your safety at most outdoor applications such as climbing, rescue, swing seats or backyard zipline setting etc..
【Coming with Carabiner】- Including an auto-locking climbing carabiner constructed by high strength stainless steel. Breaking Strength:25KN.
This carabiner makes your backyard zipline, swing seats, baby bouncer setting very easy. You only need to put this double pulley on your zipline, attaching the carabiner into the hole at bottom which you could to hanging swing seats or baby bouncer..
【Cable Diameters】- This rescue pulley is designed for rope and cable.

Check Stock