ReviewsPulley Clutch Belt

8TEN PTO Clutch for Husqvarna AYP Ogura Replaces 179335 532179335 532414737 414737 GT1A-EH01 53462700 5100417

Cool Coil Technology, Heavy Duty "FatBoy Series" Upgrade.
Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
Upgraded to 3 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness.
Specs: Description: PTO Clutch, 1.000" Crankshaft, 6.310" Pulley, Counter Clockwise, 1/2" or 5/8" Belt, 125 ft. lbs. torque.
Replaces OEM Numbers: John Deere: GY20108, GY20652, GY20878, GY21340, Scotts: GY20108, GY20652, GY20878, GY21340, Warner: 5219-20, 5219-73.

This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..

Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..

【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
1 x 10 Tooth Sprocket for #40/41/420 Chain.
1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
1 x Full Mounting Hardware. Note This is not made by Comet.

Feature: The three main parts of the compressor clutch assembly are the coil magnet, the pulley, and the clutch plate. The clutch drive plate is splined to the input shaft of the compressor..
Package Included: 1 x Pulley With Bearing.
(Professional Installer is Highly Recommended ).
Pulley Assembly Width:10.4cm,Height:2.8cm.
Part#: 140162C,7511699,10759C,F09OGBC003,5511699,6511699.

...ch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley.
1 x 10 Tooth Sprocket for #40/41/420 Chain.
1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
1 x Full Mounting Hardware. Note This is not made by Comet.

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....

5.0L Coyote Engine This kit includes special high performance components as used on the production 2012-2013 Mustang BOSS 302 and is designed to operate at higher RPMs. This kit fits Mustang GT 5.0L Coyote engine and....
High performance BOSS Alternator with 1-way clutch to prevent belt hop-off during....
Larger pulley to slow the armature speed, reduce drag and reduce parasitic hp....
Also fits M-6007-M50 5.0L 4V TiVCT, M-6007-A50NA -....

Engineered for superior durability, backed by industry-leading 2-year, unlimited-mileage warranty.
Guaranteed Exact Fit for easy installation.
100% BRAND NEW, premium ISO/TS 16949 quality - no core deposit or return required.
Kit includes compressor with clutch, drier filter, expansion valve, oil and O-ring seals.
Fits 2002 and 2003 Ford F150 V8 with a 6-groove AC clutch pulley - some models had an 8-groove clutch to use with an 8-rib belt, so please verify....

“Xtremely cool coil” design runs over 20% cooler for a longer service life – plus every clutch is backed by a buyer-protection 1-year warranty.
Replaces OEM: 717-1774, 717-1774B, 717-1774C, 917-05001, 917-1774, 917-1774B, 917-1774C.
Specs: 1.000 Crankshaft, 6.000" Pulley, Counter Clockwise, 1/2" or 5/8" Belt, 125 ft. lbs torque.
Free Upgraded - High Temperature Bearings. TOUGH Machined Billet Pulley with Replaceable Bearing - OEM Upgrade.

【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
【For your convenience this kit comes with】1 x 3/4" Driver Pulley.