ReviewsPulley Gear Reducer

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

Fitment – The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..

Check Stock

OTC 1180 10-Ton Capacity Push Puller Set

3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case.
permits damage-free pulling of gears, bearings,....
Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery.
Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread.
No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included).
No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws.

Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

[Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
[Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
[Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
[Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
[Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.

Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....

Check Stock

BENCHWHEEL 48 Teeth Drive Pulley for Electric Skateboard Longboard 2PCS

Snap-on drive pulley wheel: No need to screw, just stuck it into your wheel. Super convenient!.
Compatible with：Wheels with 6 teeth gear core, 83/920/97/100 mm wheels..

Check Stock

[10-Pack] GT2 Idler Pulley 16 Teeth 3mm Bore, Aluminum 16T Idler Pulley for 2GT Timing Belt 6mm Width 3D Printer

【Best GT2 Idler Pulley Upgrades】HKWANTAT GT2 Idler Pulley 16 teeth 3mm bore. Simple structure, high quality bearings, which is fine workmanship, smooth transmission, precise teeth pitch, high transmission efficiency and energy-saving effect..
【Excellent Performance】HKWANTAT GT2 Idler Pulley 16 teeth 3mm bore made of high quality aluminum alloy, surface oxidation treatment, durable. So many DIY enthusiasts are full of praise for it, and it will also be your best choice..
【Parameter】Type: With Teeth, Teeth: 16, Bore: 3mm, Width: 13mm, Height: 9mm, for 2GT 6mm Width Timing belt, Color: Silver..
【Widely Used in】GT2 Idler Pulley 16 teeth 3mm bore can use for 3d printer and any DIY milling machine, gear shaper, drilling machine, hobbing machine or other machinery transmission occasions etc..
【Packing List & Warranty】10 x GT2 Idler Pulley 16 Teeth 3mm Bore. 1Year Warranty. Each product of HKWANTAT had passed strict QC, If you have any problems when you use the product, just contact us, and we will help you solve it at any time..

Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

10Pcs 304 Stainless Steel M15 Single Pulley Block, Wire Rope Hanging Wire Towing Wheel, with 10Pcs Spring Snap Hook

▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage..
▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook..
▶Dimension◀: M15 Single Pulley Size: Length: 2.44in(62mm), Width: 0.83in(21mm), Max Load: 80 lbs(36kg). Spring Snap Hook: Max Load: 119 lbs(54kg)..
▶Wide Applications◀: Widely used in tractive effort of steel wire rope or other rope tools, such as rope suspension traction in indoor and outdoor applications: camping, hiking, fishing, equipment gear, fitness, hanging wheel, mountaineering, etc..
▶Packaging Includes◀: 10Pcs M15 stainless steel single pulley, 10Pcs stainless steel spring snap hook..

Check Stock

2Pcs 304 Stainless Steel M25 Single Pulley Block, Wire Rope Hanging Wire Towing Wheel, with 2Pcs Spring Snap Hook

▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage..
▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook..
▶Dimension◀: M25 Single Pulley Size: Length: 3.31in(84mm), Width: 1.18in(30mm), Max Load: 330 lbs(150kg). Spring Snap Hook: Max Load: 330 lbs(150kg)..
▶Wide Applications◀: Widely used in tractive effort of steel wire rope or other rope tools, such as rope suspension traction in indoor and outdoor applications: camping, hiking, fishing, equipment gear, fitness, hanging wheel, mountaineering, etc..
▶Packaging Includes◀: 2Pcs M25 stainless steel single pulley, 2Pcs stainless steel spring snap hook..

Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Check Stock