ReviewsPump Impeller Casing

Lanchez 1/2 HP Shallow Well Pump，Garden Pump, Jet Pump Portable Stainless Steel Water Transfer Draining Irrigation Pump for Water Removal, Lawn Fountain Pump 960 GPH 125 Feet Height

  • 【Economic Pump】The sprinkler pump is a versatile pump for pressure boosting, small underground sprinkler systems, operating lawn sprinklers and a multitude of other general purpose applications. Suitable use in garden, lawn, farm and rural house..
  • 【Strong and Reliable Performance】The shallow well pump with 1/2 HP motor. Maximum flow rate up to 960 GPH and Max lift water up to 125 feet. Corrosion-resistant stainless steel construction extends product life and is easy to clean..
  • 【Installation Notice】The garden pump should be installed in a dean, dry and ventilated location which provides adequate room for servicing and protection from freezing temperatures. It should be bolted to a good foundation, preferably concrete and provided adequate drainage..
  • 【Safety Ensure】The draining irrigation pump pay attention to safety. Full corrosion-resistant and reinforced thermoplastic construction with thermal overload protection for continuous duty use in water removal application..
  • 【Operation Warnning】 Do not run the transfer pump before priming it, since the seal and impeller could be permanently damaged. Remove the plug from the street tee and pour clean water into the unit until casing and suction line are completely filled..
Check Stock

WINGOGO Water Pump Impeller 6E0-44352-00 6E0-44352-003 Replacement for Yamaha Outboard 4 5 6 HP F4 F6 Boat Motor Engine Parts Sierra 18-3073 6E0-44352-00-00 6EO-44352-00 47-96305M

  • This Water Pump Impeller fits Yamaha Outboard Motor OEM P/N 6E0-44352-00-00 Sierra 18-3073. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Replacement for Yamaha Outboard 4HP 5HP 6HP Mercury Mariner 4A 5C Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water pump impeller dimensions measured that shaft size 11.0 mm, overall diameter 40.0 mm, thickness 12.6 mm, Blades 6. Water pump impeller is made with neoprene and hardened nylon as pictures showed, Please see the pictures..
  • Compatible with the outboards boat motor Mercury Mariner 96305M/47-96305M Sierra Marine 18-3073 Mallory Marine 9-45611 GLM 89860 SEI Marine 96-499-03B. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboard Boat Motor or not. We’r....
Check Stock

Volvo Penta Sea Water Cooling Pump Impeller Kit New OEM 4.3L,5.0L,5.7L 21951346

  • Water impeller are made of high quality neoprene,brass.High performance and durable..
  • Impeller replaces Jabsco 1210-0001,Johnson 09-1027B 09-1027B-1,OMC 3588256,Sierra 18-3081,SIE 18-3081,GLM 89540,Mallory 9-45703,Onan 132-0162,Perkins....
  • Water pump impeller diameter is 2-1/4",width is 1-1/4",shaft Diameter is 16mm..
  • Water pump impeller are 100% brand new and don't used or rebuild..
  • Water impeller have 12 months warranty and directly replacement and easy to install..
Check Stock

Jebao/Jecod RW Series Wavemaker with Controller (RW-4 RW-8 RW-15 RW-20) (RW-4)

  • Newest 2020 model with an updated controller.
  • Unique Control system allows to wave off different types and multiple functions..
  • Wireless controllers allows synchronized operations among wave makers..
  • Low Voltage DC Electronic pump with variable frequency provides a safe environment for user..
  • Easy operation to achieve the multiple sea wave. Easy installation with magnetic base. #1 Check the indicator light on the power supply. Green light means that the controller is working. no light means bad power supply. #2 check the controller, if the controller can't switch mode or speed possible bad controller. #3 Power supply checked, controller checked. but pump not working, please try to re-install the pump impeller to reset the pump. If still not working after re-install the pump impeller possible bad pump motor. #4 Extremely noisy issue - please try re-install or replace the pump impeller or re-install the both side mount basket gasket..
Check Stock

WINGOGO Water Pump Impeller 47-F436065-2 for Chrysler Force Sears Gamerfisher Outboards 9.9-10-12-15-20-25 HP Replacement Montgomery Wards Sea King Boat Motors Parts Sierra 18-8903

  • Water Pump Impeller Dimensions : Shaft Size: 0.508 inch, OD: 2.244 inch, Thickness: 0.594 inch, Blades 6. Neoprene Water Pump Impeller Plastic Hub as Pictures Showed, Please see the pictures..
  • Replaces P/N 47-F436065-2 47-F436065-1 47F4360652 47F4360651 Sierra 18-8903. This Water Pump Impeller is replacement for Chrysler Force Outboard..
  • Replacement for 9.9hp 10hp 12hp 15hp 20hp 25hp Chrysler Force Sears Gamefisher Outboard Boat Motors Engine Parts Cooling System. More Detailed Information Please See Description Below..
  • Cross Part number Reference 47-F4360652 47F436065-2 47-F4360651 47F436065-1 47-F436065 47F436065. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • Find the Correct Water Pump Impeller for your Boat Motor. It is VERY IMPORTANT to Check your Outboard Model or S/N before Purchase. You can leave us message e.g. your Boat Engine Horsepower, Year, Model or Serial Number. We’re pleasure to help you if you're unsure it..
Check Stock

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

  • Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
  • This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
  • Water pump impeller are 100% brand new and don't used or rebuilt..
  • Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
  • Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..
Check Stock

Acquaer 1/2HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6000 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

  • ...d 10' power cord with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2'' NPT discharge, capable of passing 2" diameter solids. As a waterproof effluent pump, it's ideal for basements or below grade installations.
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Wide Applications: Designed for residential and commercial sewage & dewatering, such as sewage system, septic tank, waste water drainage, sewer and basement flooding. 100% factory tested. It comes with a TWO-YEAR warranty to keep your water system stable and worry-free. Acquaer customer service provides the professional advice on installation and maintenance.
Check Stock

Acquaer 1/2HP Submersible Sewage/Effluent Pump, 6000 GPH, Cast Iron, Automatic Tethered Float Switch, 115V Sump Pump for Septic Tank, Residential Sewage, Basement, 2” NPT Discharge

  • ...10′ power cord with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2” NPT discharge, capable of passing 2″ diameter solids. As a waterproof effluent pump, it’s ideal for basements or below grade installations.
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Wide Applications: Designed for residential and commercial sewage & dewatering, such as sewage system, septic tank, waste water drainage, sewer and basement flooding. 100% factory tested. It comes with a TWO-YEAR warranty to keep your water system stable and worry-free. Acquaer customer service provides the professional advice on installation and maintenance.
Check Stock

Acquaer 3/4HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6400 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

  • ...matic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2'' NPT discharge, capable of passing 2" diameter solids. As a waterproof effluent pump, it's ideal for basements or below grade installations.
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Wide Applications: Designed for residential and commercial sewage & dewatering, such as sewage system, septic tank, waste water drainage, sewer and basement flooding. 100% factory tested. It comes with a TWO-YEAR warranty to keep your water system stable and worry-free. Acquaer customer service provides the professional advice on installation and maintenance.
Check Stock

21212799 Raw Water Sea Impeller Pump for Volvo Penta 4.3 5.0 5.7 V8 V6 GXI, Serpentine Belt Applications Crankshaft Mounted, Replace 3812519 21212799

  • 【Perfect Fit】 The Raw Water Sea Impeller Pump for Volvo Penta is compatible with Volvo Penta Sea water Boat Engines GXi models 4.3L, 5.0L & 5.7L, GL models: 4.3L, 5.0L, V8 V6 GXI. Replaces Volvo OEM numbers: 3852519, 21212799 (Old Number: 21212794, 21213664)..
  • 【Benefits & Features】 This pump will help push fluids to machines with tremendous pressure and speed. Makes the water circulate continuously through the radiator to take away the heat from the engine and ensure that the engine temperature is not high. Plug & Play Replacement. Easy installation and save your charge..
  • 【Built to Last】 Made of high strength brass and aluminum alloy, with good friction reduction performance and high corrosion resistance, durable. Durable one-piece seal ensure leak-free performance of the pump, high-grade internal bearings, and vibration polishing treatment makes the heavy duty marine grade casing brighter and corrosion-free..
  • 【What You Get】 Your package included raw water pump with serpentine belt pulley X1. Inlet port: 1 in. Outlet port: 1.25 in..
  • 【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quali....
Check Stock

Red Lion RL-SWJ50/RL6H Dual Voltage (115/230 V) 1/2 HP Shallow Well Jet Pump/Tank Combo 12.6 GPM Cast Iron Pump with 5.8 Gallon Pressure Tank, Red/White, 97080503

  • ALL-IN-ONE WELL PUMP SYSTEM: jet pump and pre-charged pressure tank are factory assembled and ready to install.
  • BUILT TO LAST: heavy-duty cast iron casing and volute.
  • glass-filled thermoplastic impeller and diffuser.
  • steel tank with high-grade diaphragm water chamber.
  • INCLUDES: 30/50 pressure switch, pressure gauge, stainless steel hose.
  • DUAL VOLTAGE MOTOR: for use with 115 Volt or 230 Volt power sources.
  • comes factory-set at 230 Volts but can be easily switched to 115 Volt.
  • ensure pump voltage matches power source.
Check Stock