ReviewsPump Test Benching

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

Vari Table (60x30) - Computer Desk with Durable Finish & Built-in Cable Management Tray - Use as Standalone Workstation or Side Table - Work or Home Office Furniture - (Butcher Block)

  • Versatile: Use as a desk, side table, or link multiple desks together for benching configuration.
  • Organized: Easily organize any cords or cables with a built-in cable management tray.
  • Easy: Assemble in minutes with quick-turn hand bolts.
  • Durable: Laminate finish with commercial-grade base that supports up to 300 lb.
  • Active Workspace: Complete your setup with Vari accessories and active workspace solutions.
Check Stock

18 Pieces Radiator Pressure Pump Cooling System Car Leak Detector Tester Tool Water Tank Adapter Car Coolant Vacuum Cleaner Head Gasket

  • ...mperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it..
  • ◇ Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation..
  • ◇ Packing list --- 1*pressure test pump with pressure gauge, 1* thermometer, 3*chrome-plated steel cap adapters, 10*anodized cap adapters, 2*connectors, 1*adapter handle, 1*carrying case. Sturdy and durable, widely compatible with various brands of cars (please refer to the pictures below for specific car models).
Check Stock

Fuel Vacuum and Fuel Pump Pressure Tester Gauge Kit

  • ◇ Large 3-1/2" diameter gauge with color-coded easy-reading scales.
  • ◇ Test Pressure Up To 10 PSI / Test Vacuum Up To 28" HG.
  • ◇ Extra long heavy-duty rubber hose and 14mm/17mm manifold adapter.
  • ◇ Brass Fittings For Compatibility With Most Cars.
  • ◇ Test Both Mechanical And Electrical Fuel Pumps, checks for worn or defective parts in fuel pump and vacuum system.
Check Stock

BILITOOLS Radiator Coolant Pressure Tester & Vacuum Refill Kit, 28-Piece Universal Cooling System Radiator Leak Tester & Refiller

  • A comprehensive coolant system pressure test & refill kit locates system leaks from header and expansion tanks and fittings, head gasket, radiator core, heater matrix, water pump, hoses and pipes, and is designed for refilling radiators with coolant without introducing air pockets..
  • The hand operated pressure pump and vacuum refiller is fitted with an accurate and easy to read gauge marked in both psi and bar. The Connections of vacuum refiller are constructed with metal, which has more stability and suction..
  • The thermometer is designed to aid diagnostics and also ensure the system is cool before removing the cap..
  • The different colors on each test cap will help operators working much more efficiently to choose suitable cap and work..
  • 17 Pieces color coded test caps are designed for testing cooling systems on most domestic and import vehicles. Is compatible with Mercedes-Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Por....
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

KUNTEC 18pcs Universal Radiator Pressure Tester Vacuum Pump Type Cooling System Kit

  • This universal radiator testers help to detect the cooling system leaks, which is easy to use in preventing the unnecessary damage caused by water leakage..
  • This radiator pressure tester and pump type cooling system kit allows easy testing for leakage in radiator system and quick change of coolant,save your energy and time.
  • This cooling system leak test tool is made of high quality aluminum, rubber and plastic, high strength and good toughness to increase stabilizes for longer service life..
  • There are 8 radiator cap adapters included, and the test range is from 0 to 35 psi, ideal for domestic and import vehicles..
  • Large volume pump capacity reduces strokes required to pressurize cooling systems Self-locking quick-disconnect components Thumb-operated relief valve for convenient pressure release.
Check Stock

0.5 Gallon Hand Pump Sprayer, Hand Held Garden Sprayer, Water Spray Unit with Adjustable Nozzle and Extra Extended Spray

  • Pump sprayer 1/2 gallon- This pressure sprayer applies to spraying lawn and garden, watering or irrigation plants, home cleaning and Car Washing,pet bathing..
  • Extended Wand Included-This spray bottle equipped with an extended long spray rod/lance, which enables you to access an awkward or less reachable area for better watering control, as the output can be adjusted from a spray to a mist mode via the adjustable nozzle.
  • Adjustable Nozzle- Whe ther you want a fine mist for your plants or a steady stream, you get it all in one sprayer..
  • Reduces Hand Fatigue- incorporated a lock-on trigger to this one-hand held garden pump pressure sprayer, knowing that comfortability matters when using your hands .
  • Factory water pressure test: Each watering can has passed the factory water pressure test. After the test, there will be a small amount of water droplets in it to keep the watering can's moist accessories and extend the life of the watering can. Note: Pressing Tighten the bottle neck before using the gas..
Check Stock

MY DIY CENTER Sump Pump Stand - Elevates & Rises Sump Pump Off Basin Floor for Flooding and Sediment Prevention - Easy to Install - Compatible With Most Sump Pump Brands - Proudly Made in USA

  • WHAT IT’S FOR - A sump pump helps remove excess water from the interior of your home. With that, a sump pump stand provides added protection and....
  • EASY TO INSTALL - All it takes is a few minutes and you can connect this stand to most brands of pumps. The built-in flow channels improve migration....
  • EXTEND YOUR PUMP’S LIFE - Regular maintenance on your pump is a necessity. Debris and sediment that collect will slowly wear down your pump’s....
  • DURABLE CONSTRUCTION - Each pump stand is made from quality, durable material that will stand the test of time. Each unit is also stackable, meaning....
  • FLEXIBILITY - The MY DIY Center Sump Pump Stand is compatible with most major brands of Sump pump..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....
Check Stock

YSTOOL Radiator Pressure Tester Coolant Vacuum Refill Kit 28PCS Automotive Cooling System Leak Test Pneumatic Water Tank Purge Fill Tool Set with Gauge Adapter Cap Universal for Auto Car Airlift

  • Three-in-one cooling system tool kit has 3 excellent functions: coolant pressure tester, coolant refilling & temperature measurement. Manual pump cooling system pressure tester can diagnose whether the radiator is leaking and help quickly bleed the waste coolant if needed. Pneumatic vacuum fill coolant tool vacuumizes to eliminate trapped air in minutes and refills cooling system with no air bubbles produced. Thermometer checks if the coolant temperature is too high. Fit for home & business.
  • 28PCS universal radiator tester pressure leak test set includes 17 color-coded radiator test adapter caps and a universal rubber cone adapter for almost all radiator openings on most vehicles at home and abroad. Another 3 radiator cap adapters and 2 connectors for radiator cap leak detection. All are well positioned in the case, complete in specifications and easy to assemble. Widely compatible with GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other model car, truck & airlift.
  • Radiator manual pump pressure detector adopts premium aluminum cylinder and accurate shock-proof gauge design (3'' color-coded dial, 0-35PSI/ 0-2.5bar). Vacuum type coolant refiller takes reliable brass and plastic material. 21" & 18'' rubber hose with brass parts, anti-co....
Check Stock