ReviewsPunch Down Tool

Leather Hole Punch Tool & 240Pcs Leather Rivets, Belts Revolving Puncher Kit with Screwdriver Grinding Rod Ruler Brass Pad 3 Sizes Double Cap Rivets with Hand punch pliers 3 Pieces Setting Tool Kit

【Convenient and Efficient】: Leather Hole Punch It has 6 different sizes, size: 2mm, 2.5mm, 3mm, 3.5mm, 4mm and 4.5mm. The six tapers are very sharp and can meet the maximum demand, is commonly used for punching round holes in leather, belts, plastic, rubber, canvas, fabric, cardboard, saddles, and similar materials..
【Ergonomics Design】: dopting the double lever mechanism makes it easier for you to get perfect holes which greatly saves your strength.
non-slip handle makes you more comfortable work.
there is a stainless buckle in the bottom of punch plier. When you don't work, you can buckle the safe lock, the hole punch becomes smaller and saves space..
【Practical Leather Hole Punch Accessories】: 2x spare shims, Punch many times, will damage the shims, and can be replaced.
1x screwdriver, you can replace the spare bottom plate, adjust the position of the gasket, loosen or tighten the screws.
1x grinding rod, can be marked Position of the hole/grind the head of the hole and clean stubborn debris.
1x ruler, can help measure the distance when drilling. Bullet Point.
【240 Pcs Double Cap Rivets】: 4 commonly used colors (gold, silver, bronze, gunmetal) 3 Assorted Sizes: 6 x 6mm, 8 x 8mm, 8 x 12mm that will add retro and exquisite style to your....

Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
Not recommended for stainless steel such as silverware and utensils.
PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.

Check Stock

BUPLDET 1 Port CAT7 Ethernet Wall Plate - Single Gang CAT 7 Keystone Jack Cover Plate for Round CAT7/CAT6/CAT5e Ethernet Cables

CAT7 has better performance than CAT6, greatly increase the network speed,.
Highly recommend use with Cat7 cable, use with CAT6/CAT5 Ethenret cable will result in networking speed degration..
Installation: Follow T568B color code to wire the CAT7 keystone jack, please use a punch down tool(NOT INCLUDED) to make the connection, OR it may no connection..
Zinc alloy shell shielded Cat7 keystone jack, one side is female RJ45, another side is punch down style that need wiring before make your Ethernet cable to work..
Punch the wires according to T568 A&B color code..

Check Stock

NEIKO 02639A 6-Inch Automatic Center Hole Punch with Adjustable One-Handed Spring Impact Chrome-Plated Shank and Premium S2 Steel Tip

DRILL PUNCH TOOL: This 6-Inch Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners..
ADJUSTABLE HOLE-PUNCH TOOL: The spring-loaded center-punch design uses spring tension that can be modified and adjusted for light or heavy marking, punching, or staking. Change the strike force any time to match the surface you are working with..
QUALITY MATERIALS: With a chrome-plated shank body and a hardened S2 steel tip, this corrosion-resistant wood-and-metal punch tool can withstand high-impact punches and force. The knurled, nonslip cap gives you a firm one-handed grip on the tool..
EASY ONE-HANDED USE: This one-handed automatic center punch needs only your hands—no hammer required. Use the S2 tip on a sturdy surface to center where you want the starter hole, and punch the tool downward to create the drill marker..
COMPACT SIZE: This automatic one-hand punch is small enough to fit in any toolbox or pocket. Carry it with you from job to job for a convenient and easy starter drill bit. You can also use this as a spring-loaded glass breaker for emergencies..

Check Stock

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..

Check Stock

Punch Needle Kits, MOMSIV DIY Rug Hooking Kit for Adults Kids Beginner with an Adjustable Embroidery Pen Yarn Rug Punch Needle Hoop (Mountain)

Includes (1) adjustable punch needle tool, (4) interchangable gauge needles, (1) spool, and (1) needle threader..
This punch needle embroidery tool set includes 4 needle sizes: 1.26mm, 1.6mm, 2.2mm, and 3mm..
Save time changing colors when working on your punch needle project with this easy to use embroidery tool!.
Easily create gorgeous embroidery details and crafts with this adjustable punch needle tool..
Use the included needle threader and spool to load your punch needle tool with your preferred thread, then get crafting!.

Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
It can help you drill easily and fast and save time and energy for you.
The combination of blue and black color makes the dr....

Check Stock

Raindrip 63100UB Professional Hole Punch

Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
Hand-held tool is designed with a comfortable pistol grip for strain-free use.
Metal hole punch tip penetrates tubing wall when handgrip is pressed.
Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
Comes with one Pistol Grip Hole Punch Tool.

Check Stock

LOONENG 3 Inch Circle Punch, Circle Shape Lever Action Craft Punch, 75mm Round Shape Circle Hole Punch for Paper Crafts, Cardstock, Gift Wrapping, Greeting Cards and Scrapbooks

【3 INCH CIRCLE HOLE PUNCH】This circle paper punch creates approximately 75 mm (3 Inch) in diameter round shapes. It can help you create shapes for scrapbooks, photo album and other crafts projects. Save yourself the trouble of cutting by hand with this easy-to-use circle punch. Add some style to your crafts with this handy circle hole punch..
【DURABLE CIRCLE PAPER PUNCH】This circle hole punch is made of ABS shell and zin alloy blade, spring-action lever design makes the circle punch easy and comfortable to use, easily get a clear shape from cardstock or glitter paper. The bottom of circle paper punch has a sliding cover at the cutting edge to catch your cuttings, strong and broad handle is easy to press down..
【WIDELY APPLICATION CIRCLE PUNCH】This classic design 3 inch circle punch is perfect for making embellishments, charts and posters or use it to add designs and layers to your favorite scrapbooks. Use it to add adorable designs to your memory books, paper crafts, journals, photo album or create lovely gift wrapping and invitations for special occasions..
【FAST AND EASY TO PUNCH】Easy to use spring-action lever makes the circle paper punch easier and comfortable to use, just press the sturdy and wide handle to make cute shapes easily a....

Check Stock

LOONENG 2 Inch Circle Punch, Circle Shape Lever Action Craft Punch, 50mm Round Shape Circle Hole Punch for Paper Crafts, Cardstock, Gift Wrapping, Greeting Cards and Scrapbooks

【2 INCH CIRCLE HOLE PUNCH】This circle paper punch creates approximately 50 mm (2 Inch) in diameter round shapes. It can help you create shapes for scrapbooks, photo album and other crafts projects. Save yourself the trouble of cutting by hand with this easy-to-use circle punch. Add some style to your crafts with this handy circle hole punch..
【DURABLE CIRCLE PAPER PUNCH】This circle hole punch is made of ABS shell and zin alloy blade, spring-action lever design makes the circle punch easy and comfortable to use, easily get a clear shape from cardstock or glitter paper. The bottom of circle paper punch has a sliding cover at the cutting edge to catch your cuttings, strong and broad handle is easy to press down..
【WIDELY APPLICATION CIRCLE PUNCH】This classic design 2 inch circle punch is perfect for making embellishments, charts and posters or use it to add designs and layers to your favorite scrapbooks. Use it to add adorable designs to your memory books, paper crafts, journals, photo album or create lovely gift wrapping and invitations for special occasions..
【FAST AND EASY TO PUNCH】Easy to use spring-action lever makes the circle paper punch easier and comfortable to use, just press the sturdy and wide handle to make cute shapes easily a....

Check Stock

BASTION Front Sight Tool & Pin Punch Tool Set for Glock | Sight Tool Fits Precisely for Removal & Installation | Pin Punch Makes Field Stripping Super Fast & Easy

WHAT YOU GET: 1 GLOCK FRONT SIGHT & 1 PIN PUNCH TOOL (2-in-1 COMBO KIT).
the Front Sight Tool works with ALL Glock models.
Pin Punch Tool is compatible with the following Glock models: G17 G19 G20 G21 G22 G23 G25 G26 G27 G28 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39..
FRONT SIGHT TOOL HAS PRECISE FIT FOR REMOVAL & INSTALLATION: Featuring magnetic tip aluminum driver, our sight tool ensures precise screw removal and installation of Glock front sights. Don’t risk scratching up your Glock with the wrong tool!.
PIN PUNCH TOOL MAKES FIELD STRIPPING GLOCK SUPER FAST & EASY: Disassembling your Glock for cleaning and maintenance is essential. Bastion Pin Punch Tool helps remove base plate, locking block, trigger housing, and trigger pins for cleaning or replacement..
PREMIUM QUALITY MATERIALS TO LAST | BASTION SIGNATURE WORKMANSHIP: Our punch tool is made of hardened steel tool with black rigid polymer handle. The Front Sight Tool features a Hex wrench, ergonomic injection molded handle, durable black finish, and 3/16″ Hex for sights with a 0.090 hex..
BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..

Check Stock