ReviewsPush Plate

SR Performance Clutch Alignment Tool; 10 Spline

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.

Check Stock

Auraroad 245PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit for Door Trim Panel Fender Auto Push Pin Set,GM Ford Toyota Honda Chrysler

...e case with chart inside lid for easy selection, don't worry about lost or damaged body fasteners..
WIDELY APPLICATIONS: You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. These push clips are widely used in body clips, decorative plate holders, door decorative fasteners, door plate clips, bumper clips, fender clips, engine cover and splash guard holder replacement..
EXCELLENT AFTER-SALES SERVICE: If you have any questions after receiving the products, please feel free to contact us. We will hear you out and work out a solution for you within 12 hours..

Check Stock

Lisle 40100 Hub Remover, Black

Safely Removes Frozen Hub Assemblies. Patent Pending.
Fits on most 5, 6 and 8 lug hub assemblies found on cars and trucks..
Bolt the 1/2" thick driving plate to the hub using the hardened washers and existing lug nuts..
Insert the hardened threaded forcing screw to push against a solid surface to loosen the hub assembly..
To completely remove hub the forcing screw must push from a least two different solid points..

Check Stock

Rural365 Chick Heating Plate Brooder Plate - 16x24in Brooder Heat Plate for Chicks and Ducklings with Adjustable Height

[Ensure Your Chicks Stay Warm]: Simulate a mother hen’s warmth with the Rural365 Chick Brooder Heating Plate.
Electric chick warmer plate will encourage healthy growth and feather development.
[Ideal Size for Your Flock]: 16 by 24-inch (40.6 by 61cm) chicken brooder heater plate fits up to 50 newly hatched chicks, ducklings, goslings, and other domestic fowl or game-bird chicks.
Adjust leg height so chicks can stand and have direct contact with the bottom of the chick brooder plate.
[Adjust to the Perfect Height]: Chick brooder box chicken heat plate set includes (4) 8.9-inch tall (22.6cm) legs with adjustable heights from 1.2 to 7.3 inches (3 to 18.5cm).
As chicks grow, increase the height of the plate using the “Push” buttons.
[Save on Your Energy Bill]: 62-watt baby chick heater brooder warmer plate prevents short-circuiting and overheating with the built-in resistant fuse and temperature fuse.
High insulation ensures low energy costs, unlike heating lamps.
[Built to Last]: ABS plastic ensures safety and durability.
Safe 12V outdoor animal heater baby chick heat plate produces uniform temperature from the underside.
Red LED indicator lights up when heating.

Check Stock

SP Ableware Round-Up Dinner Plate with High Wall - White (745290001)

High-wall plate keeps food from sliding off and can push food onto utensil.
Plate aids children and adults with limited muscle coordination.

Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Check Stock

Amsec ESL10XL Series Electronic Safe Lock

Door constructed of 7GA solid steel plate with a strong pry resistant locking bolt.
Body constructed of 10GA solid steel plate with mounting holes for top or bottom installation.
Reliable fast access Simplex push button mechanical locking device.
Heavy Duty 75lb rated slides (55lb rated when fully extended).
Locking mechanism protected by steel housing, impervious to punch attacks.

Check Stock

Corsair Hydro Series H80 High Performance Liquid CPU Cooler (CWCH80)

Push-button fan control so you can select the fan speed and cooling performance that best suits your needs.
Double-thick 120mm radiator for increased surface area and cooling potential.
Two all-new 120mm fans optimize static pressure and airflow for amazing performance.
FEP tubing provides extraordinarily low coolant evaporation levels.
A new improved micro-channel cold-plate design more efficiently transfers heat.
Push-button fan control so you can select the fan speed and cooling performance that best suits your needs..
Double-thick 120mm radiator for increased surface area and cooling potential..
Two all-new 120mm fans optimize static pressure and airflow for amazing performance..
FEP tubing provides extraordinarily low coolant evaporation levels..
A new improved micro-channel cold-plate design more efficiently transfers heat..
Includes mounting hardware compatible with all modern CPU socket designs.
Quick and easy installation brackets make it easier than ever to upgrade to watercooling..

Check Stock

Tinkeal Heat Press Machine for t Shirts 15x15 Sublimation Printer Press Heat Transfer Machine with Slide Drawer DIY Digital Industrial Quality for Hot Press Vinyl （Black）

【Upgraded version of the heat press】15*15 large size heating plate, brand new industrial quality die-casting aluminum heating plate, compared with the primary heat press, our heat press machine has added several heating tubes to make the sublimation heat press heat up the speed is faster, the heating area is more uniform, and the hot stamping effect is better and clearer..
【Teflon Coated Board】This heat press machine for t shirts is coated with Teflon, which is transfer stable, non-stick, easy to clean and prevent burning. Removable silicone pads and sponge pads can effectively absorb heat, protect the sublimation heat press support plate, and make the heat press work better..
【Drawer-type slide-out ironing machine】The new push-pull design, the chassis placement tray of this heat press machine is equipped with spring slide rails, so that you can easily pull out the heat press plate and place the items that need to be hot stamped Put it neatly and then push it back, it is very convenient to put in and take out, you no longer have to worry about being burned by the Teflon heating plate..
【LED Display Control Box】 Transfer press machine for t shirts with LED control panel can precisely set the temperature and time according to your needs, t....

Check Stock

Platform Truck with Smooth Deck, Aluminum, 48 x 30, 2400 Lb. Cap.

【Aluminum Alloy Reinforced Bracket】 All aluminum alloy design, each place is a creative experience. Aluminum alloy bracket, aluminum alloy thickened bottom plate, aluminum alloy triangle bracket and built-in steel pipe framework can make the cart more solid and durable..
【Scalable and convenient】 Our push cart baseplate can be adjustable to different size. It has anti skid sponge handle. Easy to carry and storage. 330lbs load capacity..
【Polyurethane Mute Wheels】Our push cart is solid and durable, and our push carts use the polyurethane mute wheels, our carts can easily use any any situation,and much quieter..
【Suitable for Multipurpose Use】Our push cart doesn’t need the installation, time saving.Can be easily used in various occasions, a good helper for family transportation..
【Perfect Warranty】Provide one year quality assurance.Strive to provide better after-sales service, 7 * 24 hours.Please feel free to let us know..

Check Stock

ARIES B35-2000 3-Inch Black Steel Bull Bar, No-Drill, Select Toyota Tacoma

HIGH-STRENGTH. This bull bar is built for extra strength, featuring a welded steel frame of 3-inch diameter, heavy-wall tubing.
CORROSION-RESISTANT. For long-lasting resistance to the elements, this push bar has a durable E-coat and semi-gloss black powder coat finish. This helps protect against rust, chipping and UV damage.
LIGHT OPTIONS. This truck bull bar comes ready to customize with LED lights, featuring two pre-drilled holes in the crossbar. The crossbar can accept two square lights, two round lights or an LED light bar.
PROTECTIVE SKID PLATE. To add an aggressive, aftermarket look to your truck and help protect the front end from nicks and scratches from flyaway debris, this push bumper bar features a removable, brushed 304 stainless steel skid plate.
NO-DRILL. This ARIES 3-inch bull bar installs with no drilling required and fits select model years of the Toyota Tacoma.

Check Stock