ReviewsPush Up Antenna Masts

Ancable 1 Pair Stainless Steel Antenna Chimney Y-Mount with 12ft Straps and Installation Hardware for Mounting TV Antenna Mast to Chimney

  • Durable: This chimney mount is made of 1-1/4" wide x 12 gauge galvanized steel sheet, which is heavy-duty corrosion resistant and can be used for a....
  • Special Design: This chimney mount is used to mount 1" – 1.25" outer diameter antenna masts to your chimney with 4" clearance..
  • Installation: Place the bracket on the chimney and wind the round chimney with the enclosed steel. Be careful not to twist it. When installing the....
  • Good Accessories: After the installation is completed, it is very firm, and the safety connection will not be affected by wind or rain. These make it....
  • What You Get: 2 Y-type brackets, 2 12ft stainless steel straps and installation hardware with worry-free 12 months of warranty and lifetime friendly....
Check Stock

Super Antenna MR1710 SuperWire Radial Set for HF Vertical Antennas 17m 15m 12m 11m 10m Bands ham Radio MP1 Ground Plane

  • THIS IS: The model MR1710 SuperWire Radial Set by Super Antenna. It is for all Super Antenna MP1 portable HF antenna systems. Made by Super Antenna, designed as part of the /backpack /base /travel /mobile /portable antenna system for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to 17 meters (18MHz), 15 meters (21MHz), 12 meters (24MHz), 10 meters (28MHz-29MHz). FREQUENCY RANGE: Covers 16.5 MHz to 30 MHz continuous. Also covers WARC bands, CAP, MARS, Marine, CB (26MHz-27MHz), and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 6″x4″ (15x10cm) compact roll for portability. Extends and fans out to 4 full size quarter-wave wires (1 wire for 17m band, 1 wire for 15m band, 1 wire for 12m/11m band, 1 wire for 10m band). Max wire length: 1....
Check Stock

Super Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane

  • THIS IS: The model MR8075 SuperWire Radial Set by Super Antenna. It is designed for use with the MC80 SuperCoil on all Super Antenna MP1 series portable HF antenna systems. Made by Super Antenna for /backpack /base /travel /mobile /portable antenna systems for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to the 80 meter or 75 meter (3.5 to 4 MHz) ham band. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on c....
Check Stock

TV Antenna - Antop HD Antenna SBS-301 Indoor TV Antenna for TV and FM Reception - 70 Miles Range with TV Signal Booster Amplifier and 4G LTE Filter Digital Antenna

  • 【Super Slimmer Design】- With a 17-inch wide side-by-side design, it is twice the size of typical flat indoor hdtv antennas,that's white on one....
  • 【TV Signal Booster Amplifie】- It adjusts the antenna’s power with a simple turn of a dial and connects to a secondary device simultaneously,it....
  • 【No Contract,No Bills】- Watch free TV for life on multiple devices, no monthly bill for watching TV, the smart antenna HDTV and FM paper-thin....
  • 【FM Antenna & Radio Antenna】- Connect it to a radio or tuner to enjoy local AM and FM radio broadcasts. The hd antenna for tv indoor features a....
  • 【Easy To Set Up】- The included stand allows you to position the on a table or no a wall.Push pins and application stickers also included for....
Check Stock

Xislet Antenna Ornament Rubber Adapter Base Compatible with 2007-2013 Toyota Tundra Accessory Manual Radio Antenna Mounted Base Bezel Replaces 86392-0C040

  • Material: Thermoplastic Rubber(NOT ABS PLASTIC), Functional: Tundra antenna adapter base to help the antenna in securely and snug.
  • Easy to install: Simply remove the old antenna ornament base, push ornament in the antenna by using grease(come with the package), screw it back on.
  • Soft Malleable: The antenna ornament made of high-quality thermoplastic rubber compound, resistant to breaks, faded, dry-rotted, heat.
  • Directly antenna ornament replacement for tundra replace part number: 748579529453, 863920C040, 86392-0C040, AM-2419253465, TYZAN00009.
  • Please Note! Package includes: Only 1 antenna ornament + 1 tube of grease (NOT Includes Antenna).
Check Stock

Antenna Ornament for 2007-2014 Toyota Tundra - Toyota Genuine Accessory 86392-0C040 Manual Radio Antenna Mounted Base Bezel

  • COMPATIBILITY OF ANTENNA ADAPTER BASE: Check First! As our Product May Fit One or more Vehicles, Please Refer to the Amazon Parts Finder Tool to see if this Antenna Base does fit your vehicle..
  • PERFECT ANTENNA ORNAMENT REPLACEMENT: Each Antenna Ornament Replacement Measures 3.8” x 2.1” x 0.5” and is Intended to be compatible with 2007-2012 OEM Toyota Tundra..
  • FINE CRAFTSMANSHIP: The Tundra Vehicle Antenna Ornament is Meticulously Crafted Using Premium Quality Material For Required Durability and Long-Lasting Use. It Will Last Just as long as an original part..
  • REPLICATES THE ORIGINAL PART: The Tundra Vehicle Antenna Ornament Is The Perfect Replacement for the Original Part (86392-0C040 Antenna Ornament). It Mimics the original look and design..
  • EASY & QUICK INSTALLATION: This Vehicle Antenna Ornament Can Be Easily Installed Within Minutes. No Complicated Tools or Hacks needed. Simply Remove The Old Original One And Push Ornament In The Antenna..
Check Stock

SiriusXM NGVA1 Magnetic Antenna Mount for Your Vehicle

  • Mounts on most metal vehicle surfaces and has rubber feet to prevent scratching.
  • Low profile, small size and approximately 23-feet of cable allows the antenna to be placed almost anywhere on the vehicle to ensure optimal signal reception.
  • Compatible with all radios and docks that work on the Sirius and XM networks with push on style, single input antenna connector.
  • Includes NGVA1 Magnetic Mount Vehicle Antenna and Installation Guide.
  • Replacement magnetic vehicle mount antenna for SiriusXM, XM and Sirius Radios and Vehicle Docks.
Check Stock

SiriusXM NGVA3 Magnetic Antenna Mount for Your Vehicle, Black

  • Mounts on most metal vehicle surfaces and has rubber feet to prevent scratching.
  • Low profile, small size and approximately 23-feet of cable allows the antenna to be placed almost anywhere on the vehicle to ensure optimal signal reception.
  • Compatible with all radios and docks that work on the Sirius and XM networks with push on style, single input antenna connector.
  • Includes NGVA3 Magnetic Mount Vehicle Antenna and Installation Guide.
  • Replacement magnetic vehicle mount antenna for SiriusXM, XM and Sirius Radios and Vehicle Docks.
Check Stock

Powerbuilt 4 Ton Ratchet Jack Stand - 647529, Red

  • Precision 4 ton jack stands with a lifting range of 13 in. to 20-1/4 in..
  • Strong heavy duty stamped steel with fully welded seams.
  • Dependable ductile iron masts with 10 different height settings.
  • Innovative wide-angle four point stance for extra stability.
  • Stylish and affordable Powerbuilt products meet or exceed ASME and PALD standards.
  • Four point wide stance for maximum stability.
  • Heavy duty stamped steel frame with fully welded seams.
  • Ratcheting ductile iron masts offer 10 height settings.
Check Stock

TP-Link TL-WR740N  Wireless N150 Home Router,150Mpbs, IP QoS, WPS Button

  • Wireless speed up to 150Mbps CCA technology delivers reliable performance even in noisy environment.
  • Wireless security encryption easily at a push of QSS button Priority of service assures the quality of bandwidth sensitive applications such as voice and video.
  • Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Interface: 4x 10/100 LAN Ports, 1x 10/100 WAN Port.
  • Antenna: 5dBi Fixed Omni Directional Antenna Wireless Signal Rates: Up to 150Mbps Frequency Range: 2.4~2.4835GHz.
  • Receiver Sensitivity:130M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER.
Check Stock

Simhoa 2PACK Spare Windsurf Tendon Joint Replacement Hardware for Windsurfing Mast Foot

  • RDM / REDUCED DIAMETER MAST / SKINNY - compatible with reduced diameter masts. Not compatible with SDM standard diameter masts..
  • US BASE CUP - All US base cup universal joints / bases should fit these extensions. Not made for Europin bases..
  • DOWNHAUL ROPE - downhaul rope included with these mast extensions..
  • EXTENSION LENGTHS - 12cm (minimum) to 28cm (maximum).
  • ADJUSTABLE LENGTH - easy to use snap collar adjusts in length by 2cm increments..
Check Stock