ReviewsPush pull Series Connectors

40pcs Compact Wire Conductor Connector- DIY Splicing into 2/3/4/6 Way Butt Terminal Connectors for 28-12 AWG with Screws

  • ARBITRARY COMBINATION - total 40pcs ,Including 10pcs left ,10pcs right and 20pcs middle for DIY splicing, which can be flexibly assembled or disassembled into 2 , 3, 4, 6bit (way) butt connectors as needed. Don't worry about buying mismatched terminal connectors.
  • UNIVERSAL COMPATIBILITY - Connect any combination of solid, stranded, and flexible copper wires. Suit for 0.08-4 sqmm / 28-12 AWG. They work with most every gauge of normal household wiring: ceiling fans, sockets, switches, cars, speakers, lighting, electrical boxes, chandeliers, light switches, and and other wire connecting parts..
  • EASY TO USE - Instead of traditional electrical tape and twist-type electrical butt connectors. Don't need more tools to connect wires, just using your hands. Push the orange levers to 90 degree and plug the wires (Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end) and then put the levers back..
  • REUSABLE - These SPL-1 terminal connectors are reusable and creative wire nuts. when you need to change other wires, just flip the little lever up and pull out what you need and replace.
  • SAFE AND RELIABLE - BL wire connectors housing is made of nylon PA66 with high quality flame retardant insulation material, which has the advan....
Check Stock

UOHGDPY 25Pcs Mini Wire Connectors, Lever Wire Nut Splicing Connectors Assortment Pack Kit for Circuit Inline 24-12 AWG, 10 PCS Self Tapping Screw.

  • 【Safe and Reliable】HTCELLE lever wire connectors housing is made of the best high quality PC insulating material. With the advantages of long life, corrosion resistance, high-temperature resistance and aging resistance, HTCELLE wire connector can effectively prevent electrical leakage. So the lever wire connectors are safer than traditional wire nuts..
  • 【Practical and Space Saving】HTCELLE lever wire connectors is a reusable and creative connector. If you need to change other wires, just flip the little lever up and pull out what you need and replace. HTCELLE lever wire connectors adopt special and scientific design, which will save space effectively. And when you combine the wires, you don't need to worry about a twist between the wires. HTCELLE wire connector will help you to make a clean and beautiful house..
  • 【Universal Compatibility】Connect any combination of solid, stranded, and flexible copper wires. The HTCELLE lever wire connectors assortment pack can meet your different demand because it has 3 different models (2 port, 3 port, 5 port). The connector is widely used in decoration wiring. For example, it is an ideal product for connecting ceiling lights, spotlight and more..
  • 【Easy to Use】 Don't need any tools to connect wires, just u....
Check Stock

24V Control Module, 7 Connectors, 4-Wire Throttle, Fits for Razor E100(V10+), E125 (V10+), E150 (All Version), eSpark(All Version), Trikke E2 (All Version), Model: ZK2400-DP-LD (ZK2400-DP-FS)

  • COMPATIBLE ONLY WITH: Razor E100 & E125 Versions 10 and up, E150 All Versions, and eSpark(All Versions), Trikke E2 (All Versions).
  • DOES NOT Fit Razor Black Label E100, Power Core E100, E100 Glow Electric Scooters. The Razor Power Core E100, Razor Black Label E100, Razor E100 Glow and the Razor E100 scooter are different models and most parts are not interchangeable among them.
  • Replace Razor part #: W13111612015, Model No: ZK2400-DP-LD (ZK2400-DP-FS). 7 connectors (5 plastic connectors & 2 metal connectors), 4 pin throttle connector.
  • Version Specific Controller: The version number is located on the ID tag which may be found on the battery charger, battery box, handlebar stem, bottom of scooter, or other areas. The 7th and 8th numbers on the Razor ID tag are the version number. (For example: 01 = Version 1, 09 = Version 9, 14 = Version 14).
  • Installation Tips: The E100 series Razor scooter is a PUSH START scooter. You need to push the scooter, twist the throttle and then the motor will engage. Please check the wiring to make sure that it is correct before installing the new controller.
Check Stock

Kramer The 84 Custom Graphics The Illusionist EVH D-Tuna with Gig Bag, 3D Black/White Swirl

  • Floyd Rose R2 1000 Series Locking Nut with String Retaining Bar.
  • Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System.
  • Push/pull volume control for series/parallel switching.
Check Stock

HALO H99ICAT Recessed Lighting Housing for New Construction Ceiling, Insulation Contact, Air-Tite, Aluminum, 4 in.

  • New construction recessed can, ideal for those who have easy access to their ceilings.
  • Insulation contact rated: Designed for insulated ceilings where contact is necessary.
  • Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning cost.
  • Listed for damp location when used with dedicated wet rated recessed lights.
  • Compatible with a wide variety of 4 inch LED retrofit trims, but is best with HALO quality RL, RA, SLD, LT, SMD, and ML series models (Bulb free with some having a 45 year LED lifespan).
  • Compatible with a wide variety of 4 inch recessed light trims, but is best with HALO 999, 998, 993, 992, 990, 953, and 951 series models.
  • Got-Nail: Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams.
  • Pass-N-Thru bar hangers: Fixture has pre-installed nails that easily installs in regular lumber, engineered lumber, and laminated beams.
  • Slide-N-Side Junction Box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
  • Three "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
Check Stock

HTCELLE lever wire connectors, 30 Pcs Wire Connector Assortment Pack Compact Splicing Connector Kit for Electrical Wires Solid Stranded Flexible Wires A221-412 A221-413 A221-415

  • 【Safe and Reliable】HTCELLE lever wire connectors connector housing is made of the best high quality PC insulating material. With the advantages of long life, corrosion resistance, high-temperature resistance and aging resistance, HTCELLE wire connector can effectively prevent electrical leakage. So the lever wire connectors are safer than traditional wire nuts..
  • 【Practical and Space Saving】HTCELLE lever wire connectors is a reusable and creative connector. If you need to change other wires, just flip the little lever up and pull out what you need and replace. HTCELLE lever wire connectors adopt special and scientific design, which will save space effectively. And when you combine the wires, you don't need to worry about a twist between the wires. HTCELLE wire connector will help you to make a clean and beautiful house..
  • 【Universal Compatibility】Connect any combination of solid, stranded, and flexible copper wires. The HTCELLE lever wire connectors assortment pack can meet your different demand because it has 3 different models (2 port, 3 port, 5 port). The connector is widely used in decoration wiring. For example, it is an ideal product for connecting ceiling lights, spotlight and more..
  • 【Easy to Use】 Don't need any tools to connect wir....
Check Stock

BAOSHISHAN Force Gauge Stand Push Pull Force Test Stand Manual Test Stand Vertical Spiral Type Stroke 220mm with 2 x HJJ-001 Clamp (APH Test Stand)

  • [PARAMETERS] -- Model: APH Push Pull Test Stand | Stroke: 220mm | Net weight: 5kg | Dimension: 490mm*210mm*140mm | ONE YEAR warranty and professional technical support.
  • [WITH HJJ-001 CLAMP] -- Each Force Test Stand comes with 2 HJJ-001 clamps, which can be installed on the digital force gauge for tensile testing. Screws and wrenches for installation are also included in the package..
  • [FOR PUSH PULL TEST] -- The tension test stand is specially equipped for DL, ZP series of push pull force gauge (not included), which can be combined to a test instrument for different purposes of tests..
  • [APPLICATION] -- The manual test stand is widely used in rubber and plastics, light industry, textiles, building doors and windows, composite materials, wire and cable industries, and tensile experiments..
  • [CUSTOMIZABLE] -- If you need a longer stroke test stand, please contact us for customization. The custom time is generally 4-5 working days, and our shop provides a one-year warranty..
Check Stock

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

  • Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
  • The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
  • Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....
Check Stock

11' Fiberglass Running Wire Cable Coaxial Electrical Fish Tape Pull Push Kit

  • For running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings Great for installing cable.
  • Includes (1.1FT) 10 rods with threaded brass connectors, 3/16" flexible acrylic connection, brass push and pull rods.
Check Stock

33' Fiberglass Running Wire Cable Coaxial Electrical Fish Tape Pull Push Kit

  • For running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings Great for installing cable.
  • Includes (3.3FT) 10 rods with threaded brass connectors, 3/16" flexible acrylic connection, brass push and pull rods.
Check Stock

115 PCS Lever Wire Connectors Nuts Kit with Bases&Screws 28-12 AWG, Electrical Connectors 2/3/4/5 Conductor Combination, Compact Splicing Wire Connectors, Quick Disconnect Wire Splice Connectors

  • ...e comprehensive cost is greatly reduced..
  • 【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances..
  • 【Practical】 The wire connectors nuts is a reusable and innovative connector. If you need to replace other wires, simply pull up on the small levers, pull out what you need and replace them. The XHF wire connectors nut features a special scientific design that saves space. When you combine wires, you don't need to worry about the distortion between the wires. The XHF cable connector will help you create a clean and beautiful house..
  • 【Convenience】 You can connect wires without any tools with your hands. Push the orange handle to 90° and plug in the wire (peel the wire case to 0.35-0.47 inches and make sure the wire is inserted into the end. Do not open the wire case for too long) and place the back of the wire clip. When you make an electrical connection, you only need a little power to push the lever up..
Check Stock