ReviewsPv Road Lamp Controller

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Victron Energy SmartSolar MPPT Tr 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT Tr 250-Volt 100 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

BLUETTI Solar Generator EB70S with PV120 Solar Panel Included, 716Wh Portable Power Station w/ 4 110V/800W AC Outlets, LiFePO4 Battery Pack for Outdoor Camping, Road Trip, Power Outage

  • [Solar Power Your Life] - This solar generator kit includes 1 EB70S and 1 PV120 120-watt foldable solar panel, enabling you to replenish this 716Wh power station from 0-80% in 6 hrs..
  • [Power All Loads for the Road] - EB70S has everything you need in one unit, including 800W AC outlets/100W PD/USB-A/DC 5521/car port. A 15W wireless charger greatly facilitates the charging of phones..
  • [Fast Recharging] - With the built-in MPPT controller, EB70S can be recharged from 0 to 80% within 3 hrs by max. 200W solar or AC input. It can also get fully recharged from a 12V or 24V car port..
  • [2500+ Life Cycles to 80%] - The solar generator outshines the others in battery life with its ultra-safe LiFePO4 battery cells and premium BMS tech, making it a reliable and secure power backup..
  • [What You Get] - BLUETTI EB70S portable power station, 120W solar panel, AC adapter, solar charging cable, car charging cable, user manual, 24-month warranty, and friendly local / online customer service..
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humi....
Check Stock

Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed

  • ????????US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • ????????Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fe....
Check Stock

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

  • Increases PV Solar Array Output to battery bank by up to 30%..
  • Designed for charging from your solar array to battery banks with nominal design voltages from 12 to 60 VDC.
  • Fully Programmable and Built-in 128 Days of Data Logging..
  • Ready for Summer temps with Full Power Output in Ambient Temperature up to 104°F (40°C).
  • Highest quality MPPT controller for maximizing your solar system performance..
Check Stock

Solar Pump Controller, LCB 10A with IP68,Linear Current Boosters used in solar direct pumping applications;Compatible Models: 12V or 24 VDC pumps; Input Voltage: 16 - 50 DC; Potting epoxy resin

  • Solar pump controller,Linear Current boosters used in solar direct pumping applications.
  • DC solar pump and solar panels. Input Voltage: 0 - 50 DC volts PV Array, Current: 0 - 10 DC amps.
  • The controller can be used in both 12V and 24V systems ..
Check Stock

Victron Energy SmartSolar MPPT TR VE.Can 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT Tr VE Can 250-Volt 100 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from solar panels, and stores it in batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Edifier USA 2.1 Speaker System (M3200)

  • Uniquely designed, 2.1 audio system capable of hosting multiple audio sources via 3.5mm auxiliary input, PC to PC signal input and CD to CD signal input.
  • Wooden enclosed, magnetically shielded subwoofer with 5 1/2 inch driver.
  • Elegantly designed, magnetically shielded 2-way satellites.
  • Wired rotary master volume controller with "red-halo "glowing effect, including on/off feature, headphone jack and 3.5mm auxiliary input.
  • Subwoofer / bass unit: 5 1/2 inch (140mm), Magnetically shielded, 4ΩMidrange unit: 2 inch x 3 1/2 inch (50mm x 90mm), Magnetically shielded, 4ΩTreble unit: ¾ inch (20mm), PV domed, Magnetically shielded, 8Ω.
  • Wooden enclosed, magnetically shielded subwoofer with 51/2 inch driver.
  • Wired rotary master volume controller with "red-halo" effect, including on/off feature, headphone jack and 3.5mm auxiliary input.
Check Stock

Power-Vac 022-D-2100 26 Heavy Duty Filter Bag for Cleaner

  • Generic Power Vac 020-D-2100, PV2100 26" Super Fine Mesh Debris Bag.
  • Micron filter bag filters Debris Down to 70 Microns to filter screen enclosed pools.
  • Replaces Powervac bag part 020-D-2100 019-D-2500 019-D-3000.
  • For use with Powervac Models PV2100, PV2200,PV2500,PV3000.
  • Durable reusable polyester reusable Micron filter bag for commercial use.
Check Stock

BougeRV 200 Watt Solar Panel Starter Kits, 9BB Mono Include 30A 12V/24V PWM Negative Ground Solar Controller, Solar Cables, and Mounting Z-Brackets for Off-Grid Life and Camping (200W*1)

  • ONE PURCHASE FOR YOUR PROJECT. Totally 200 watts system, a one-stop installation kit contains 1 piece of 200-watt solar panels, 1 pair of 20FT/10AWG solar to controller cable, 1 pair of 8FT/10AWG controller to battery cable, and 4 units mounting z brackets..
  • 1-on-1 Solar Solution by BougeRV Tech Support & Warm Warranty. BougeRV promises an 18-month product warranty and 25-years power warranty and lifetime warm-hearted service for you. Please contact us whenever you have any problem with BougeRV solar panel. We will provide you with a professional guide to building a solar system..
  • 9BB Cell Design. More Busbar, More Power. BougeRV 200W solar panel uses the high-level 9BB cell design which has a 22.8% highest conversion rate. Makes the solar panel have a longer service life. Increase the cell receiving surface, thinner ribbon reduces the covered area by 22%. Also, it can charge a 12V battery or charge a 24/48V battery by wiring several solar panels in series..
  • Negative Ground PWM Controller: BougeRV's 30A PWM charge controller adopted a negative ground design, be able to compatible with more vehicle system and not worry about the polarity. The backlit display makes it easy to check the parameter in the dark in real-time. To check the PV status and the Bat....
Check Stock