ReviewsPva Filter Fabric

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

New PVA Mop and Bucket with Wringer Set for Floor Cleaning, Super Quick Dry, Hands Free Squeeze Sweeper Sponge Mop with Extra PVA Head (1 Year use) for Hardwood Laminated Tile Floor Mop.

  • HANDS-FREE SELF-WRINGING SYSTEM – This mop comes with a bucket that can clean the mop in a second. It also squeezes the mop in a second. When you knock over a lot of water, he can easily recycle the water. This PVA mop can also be used outdoors..
  • GREAT PVA SPONGE - The sponge absorbs water as you mop, so your floors dry in minutes. When not in use, the sponge dries hard so it will not pick up odors or smells like other conventional sponge mops. When you need to use it again, just soak it in water for a little while and it will be restored..
  • YOU NEED A PVA SPONGE MOP – All mops wet the floor when they are finished, only the PVA sponge mop can soak up all the moisture. You don't worry about falling anymore. It works best on tiles, hardwood floors, marble, and your kitchen and bathroom.For use on wood floors recommended that the Angle between the PVA mop and the ground be less than 45° to reduce friction, and the Angle of 30° is the most energy saving..
  • COMPACT FOR EASY STORAGE: This sponge mop bucket is perfect for small apartment. Small bucket but as it uses water effective, can do big areas. All pieces are compact enough to fit effortlessly inside the bucket. When you don't use it, just put your household cleaning tools in the corner and never wor....
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
  • Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
  • Consistent Diameter - +/- .03mm dimensional accuracy.
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
  • Works on all major dual extruder 3D printer brands.
Check Stock

Kitchen Faucet 3 Pack Booster Shower Faucet Water Filters Water Purifier Faucet Kitchen Faucet Water FilterScalable/Rotating/Folding Faucet Water Filter Telescopic Blue,Pink,Green)

  • ★【Widely Applicable】Suitable for most of long and round basin faucets, applicable faucet outlet diameter from 16-22mm.Applicabe tap:Single hole....
  • ★【Faucet Water Filter】Built-in layered filter can separate coconut activated carbon, zeolite, PVA non-woven?fabrics, calcium sulfite and rubber,....
  • ★【Healthy Lifestyle】Remove the water in the chlorine, heavy metals, other impurities,water more sweet, more secure..
  • ★【Easy to Clean】A must item for home & office use,100% new and high quality.High temperature resistance, not easy to deform.To clean, simply....
  • ★【Water-saving】Made of soft rubber material can prevent water leak which can save water for your each time using..
Check Stock

Universal Interface Faucet Mount Filters 3 Pack Faucet Water Filter Purifier Activated Carbon Kitchen Tap Filtration Removes Hard Water for Home Kitchen Bathroom

  • 【Five Layer Filtration】 Our hard water filter kit built in layer-by-layer purification filtration system, including PVA non-woven fabrics, calcium....
  • 【Portable Tap Faucet Filter】 The package comes with 3 pieces small water filters wraped by paper boxes, sufficient enough for you to use or....
  • 【Easy to Install & Water Saving】 Its insert hole is made of high quality PVC rubber with some elasticity. When insert the faucet, please give some....
  • 【Widely Application】 Our faucet water filters are suitable for most of round and long basic faucets. Like single hole basin faucet, double basin....
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have....
Check Stock

Aquabot SP100 Dual PVA Hyperfine Brush Automatic Robotic Universal In Ground Pool Cleaner Machine with Ultra Fine Filtration and 40 Foot Cord

  • ROBOT POOL CLEANER: Automatic robotic pool cleaner with ultrafine filtration.
  • Dimensions (L x W x H): 21.3 x 19.7 x 14.6 inches.
  • SPOTLESS SHINE: Equipped with high corrugated PVA brush on wheels with additional rotating brush to completely scrub pool floor, cove, wall, and waterline for spotless shine.
  • SAFE ON ALL SURFACES: Safe to use on all pool surfaces including vinyl, tile, and more.
  • ULTRAFINE FILTRATION: Innovative filter cartridges are designed to trap the smallest debris for maximum cleaning and maintenance and easy-to-replace filter baskets without taking robotic cleaner out of your pool.
  • CLEANING CYCLES: Customize your cleaning routine with 1.5-hour cleaning cycles.
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 1kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens

  • PREMIUM PVA: Our professional grade filament ensures better dissolvability, stronger toughness, smoother printing, no bubbles, no warping, and a pleasant tangle-free experience. ROHS and CE certified..
  • DISSOLVABLE FILAMENT - Fused Materials PVA is a water-soluble filament used with dual extruder 3D printers to print support structures, molds, complex shapes and more!.
  • OPTIMIZED FOR PLA – Fused Materials PVA was designed to be a user-friendly dissolvable material and works best with many common materials such as PLA..
  • VACUUM SEALED: Fused Materials PVA is comes packaged in a vacuumed resealable mylar pouch with an added desiccant to preserve the filament quality. When the filament is not in use, easily reseal the bag to prevent dust build up and moisture buildup..
  • TECHNICAL SPECIFICATIONS: Consistent Diameter - +/- .03mm dimensional accuracy. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 1.50.
  • 1 kg spool (2.2lbs). Recommended extrusion/nozzle temperature 190°C - 220°C, bed 50-80℃. Works perfectly with all common 1.75mm FDM 3D printers..
Check Stock

Fused Materials PVA 3D Printer Filament, 2.85mm, 0.5kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens

  • An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
  • Consistent Diameter - +/- .03mm dimensional accuracy.
  • Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
  • Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
  • Works on all major dual extruder 3D printer brands.
Check Stock

MakerBot PVA Support Filament Spool for Method 3D Printer (Natural, 0.45kg/1lb)

  • Type: MakerBot’s Precision Dissolving PVA ensures fast and effortless support removal for your most complex prints.
  • Compatible With: PVA is a water soluble support material that is compatible with many lower temperature model materials such as PLA and PETG.
  • For Complex Printing: Because PVA is water soluble it is very office friendly, and is a great option for printing the most complex geometries in a prototyping environment.
  • Spool: Smart Spool provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
  • Keep It Dry: Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
Check Stock