ReviewsPvc Cutting Equipment

Southwire 58133701 3/4-in Liquid-Tight Connector,Grey

Made in USA. Use with Sealproof straight or right angle connectors.
can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
outdoor, sunlight resistant, direct burial..
Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
UL Listed Underwriter's Laboratories File No. E-129973.
UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.

Check Stock

Ezygrind Inside Pipe Cutter with 1 1/2\ (36mm) Diamond Blade

Pipe cutter for cutting plastic pipe 1 1/2" - 3" from the inside..
Internal pipe cutter includes 2 Free Flow Guide Wheels that stabilize the blade during cutting..
Plumbing tool with reduced cutting vibration for a smooth cutting action..
Inside PVC pipe cutter for cutting HDPE and ABS pipe in hard to reach places..
Internal PVC pipe cutter comes with a longlife diamond blade that can cut concrete..

Check Stock

Set of Carbon Fiber Pattern Tank & Gas Cap Sticker Decal Pad for Kawasaki Ninja 650r Z1000 Z750 ZX6R ZX10R ZX14 ER6

* Tank Protector Pad : Fit For ALL MOTORCYCLE.
* Gas Cap Cover Pad : Only Fit for the following Kawasaki models: 2007-2013 Z750 ZX6R Z1000.
Perfect Cutting with High Quality PVC. Ultra-sticky Adhesive From The Back with Carbon Fiber Pattern Look.
Easy Install and Remove. No Extra Tools or Equipment Needed..
Size: Tank Protector Pad Length: 8″ (20.3cm).
Gas Cap Cover Pad Diameter: 4 9/64″(10.5cm). Color: Carbon Fiber Pattern. Material: High Quality PVC.

Check Stock

Ezygrind Inside Pipe Cutter with 3 1/8\ (80mm) Diamond Blade

Pipe cutter comes with 2 Free Flow Guide Wheels for cutting 4" - 6" pipe from the inside..
Internal pipe cutter with a measured blade cutting depth for longer blade life and faster cutting..
Plumbing tool comes with a segmented diamond blade that will cut plastic and concrete..
Inside PVC pipe cutter attacks PVC, HDPE and ABS plastic fast without melting the pipe..
Internal PVC pipe cutter uses the Free Flow Guide Wheel to minimizes vibration..

Check Stock

Libraton PVC Cutter 1-5/8\

...sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter..
【100% Satisfaction Guarantee】Supply a 12-month warranty to this PVC pipe cutter. We have....

Check Stock

Cool Runners Pro Grip 15' 19oz PVC Competiton 4" Pitch Agility Tunnel with Super PVC Raised Traction Grip, Yellow

Pro Grip 15' 19oz PVC Competiton 4" Pitch Agility Tunnel with Super PVC Raised Traction Grip - Meets AKC, UDSAA, AAC, and CKC Competition Equipment Guidelines.
Meets AKC, UDSAA, AAC, and CKC Competition Equipment Guidelines.

Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool, Cuts up to 1-5/8\ PEX, PVC, PPR and Plastic Hoses, Pipe Cutters with Sharp 5Cr15MoV Stainless Steel Blades, Suitable for Home Repairs and Plumbers

...able hardness aluminum alloy steel with high hardness, good toughness and high strength. The blade is made of 5Cr15MoV, which is not easy to rust, bend and break, and can cut the pipe evenly and accurately, not easy to deviate.
【Wide Applications】Ratchet PVC Cutter is designed to OD up to 1-5/8"(42mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
【Ergonomic Design】The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
【Efficient and Safe】The ratchet drive design ensures the automatic locking function during the cutting process, protecting the user from the injury caused by the rebound of the blade. There is a plastic buckle on the bottom of the tube cutter for easy storage. When not in use, the handles on both sides can be retracted and the safety lock can be....

Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool, Cuts up to 2-1/2\ PEX, PVC, PPR and Plastic Hoses, Pipe Cutters with Sharp 5Cr15MoV Stainless Steel Blades, Suitable for Home Repairs and Plumbers

...able hardness aluminum alloy steel with high hardness, good toughness and high strength. The blade is made of 5Cr15MoV, which is not easy to rust, bend and break, and can cut the pipe evenly and accurately, not easy to deviate.
【Wide Applications】Ratchet PVC Cutter is designed to OD up to 2-1/2"(63mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
【Ergonomic Design】The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
【Efficient and Safe】The ratchet drive design ensures the automatic locking function during the cutting process, protecting the user from the injury caused by the rebound of the blade. There is a plastic buckle on the bottom of the tube cutter for easy storage. When not in use, the handles on both sides can be retracted and the safety lock can be....

Check Stock

Happybuy Corner Rounder Cutter 2 Dies R6 R10 30mm Thickness with Paper Holding Device Heavy Duty Corner Rounder Punch for School Business

Product Parameter: Cutting height: 30MM (1.18 "), only provide standard cutting dies: R6 (1/4"), R10 (3/8 "), Note: R6 fillet radius is 6MM, R10 fillet radius is 10MM. Other round corner cutting dies: R3, R4, R8, please purchase by yourself..
Premium Quality: The whole corner cutter is heavy duty with metal structure. The high-quality blade has sharp edges, fast cutting speed, and high efficiency. And the iron-casting base provides good stability..
Excellent Handle: The longer handle is more ergonomic than the ordinary handle. According to the lever principle, it is more labor-saving, easy to cut, and with higher efficiency..
Paper-pressing Device: The paper-pressing device of the corner rounder can effectively prevent the cutting paper from slipping, especially for PVC materials or business cards with prominent effects..
Manual round corner cutter is widely used for fillet-cutting of business cards, books, package and decoration, documents, certificates, bags, and notebooks' PVC cards, etc. It applies to paper, cardboard, film, PVC certificates, leather, etc..

Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..

Check Stock

PVC Pipe Inside Cutter Set - 1/4\ Hex Shank PVC Plumbing Inside Cutter with 6 Saw Blades of Different Diameters

PVC Pipe Cutter Set: Our saw handle is made of high hardness heavy carbon steel, which is durable and hard to break. The saw blade is made of solid HHS material, which has sharp teeth. 6 kinds of saw blades with different diameters and sizes bring you perfect cutting effects and improve your work efficiency.
Packaging Size: You will receive a set of PVC pipe cutting tools, which are equipped with six saw blades with diameters of 0.87in, 0.98in, 1.26in, 1.38in，1.73in and 1.96in respectively. You can select the saw blade with the corresponding size according to the actual situation.
Easy to Install and Carry: This set of saw blade suits most electric drills. It is very convenient to install and replace. Saw blades of different sizes are not only suitable for external pipe cutting, but also for internal cutting according to the needs of the working scene.
Widely Used: Our pipe cutting tools can be connected to the electric drill to cut pipes, which is suitable for daily household maintenance, cutting PVC pipes and plastic pipes, and outdoor camping.
Attention to Safety: Before cutting the pipe, make sure that the blade is tightly locked on the shaft. Otherwise, the inner pipe cutter may not function well. When using rotary tool accessories, always wear gl....

Check Stock