ReviewsPvc Medical Railing

Vinyl PVC 5\ X 5\ Post Two-Piece Base Trim Skirt (White)

  • Measures True to Size - 5" x 5" - Trim Skirt will work on 5" x 5" Vinyl/PVC Post Sleeve/One Complete Sleeve (WILL NOT WORK on post wraps!).
  • Easily snap around vinyl posts without taking down railing or fence.
  • Excellent quality and guaranteed to last.
  • Weather resistant construction (100% vinyl resin).
Check Stock

Muzata 20Pack Stainless Steel Angle Beveled Washer 25 30 35 Degrees ID 5/16” for Cable Railing Kit Deck Stair Railing Wood Metal Aluminum Posts T316 Marine Grade CR58

  • IMPORTANT to know before purchases - Angle beveled washer CR58 is ONLY compatible with 1/8" cable railing thread studs (Muzata CR42 CR50 CR52) and 3/16" cable railing kit CR53. Please note that ONLY thread studs require angled washers while the lag screw doesn’t. For other models and compatibility, please check picture 2 to find the matched washers and cable railing kits you need.
  • For 25-35 degree stairs - This T316 stainless steel angled washer is specially designed to act as a filler between the cable railing kit and the end post on 25 30 35 degrees staircase. The inner diameter of CR58 is 5/16", suitable for 1/8" 5/32” 3/16" cable railing kit with outside diameter less than 5/16" in 25 30 35 degrees staircase cable railing system. The package includes: 20 packs of angle beveled washers.
  • Easy Installation and marine grade -This angle beveled washer is perfect for DIY a clean and neat cable railing project. It is easy to install, especially for beginners. This angled washer is made of T316 marine grade stainless steel, which has excellent durability and strong resistance to rust and corrosion, and extreme weather.
  • Pre-Designed System - We pre-designed a cable railing system to help you construct a 1/8" cable railing system, which includes tension....
Check Stock

Pylex 13048 44 Post Base Black - 5 Pack

  • HEAVY-DUTY ALUMINUM: Fence Post Cap using ADC12 Weather-Resistant Aluminum casting, Beautiful and Generous, Post Cap can Resist outdoor Bad Weather erosion, the surface of the high-intensity and high-temperature powder coating, 10-year warranty Does not fade, No paint..
  • APPLICABLE: Suitable for standard 3" x 3" Deck Railing Wood Post, and also Suitable for Decorating Decks, Fences, Lamp Posts, Mailboxes and other posts.(Note/not applicable to PVC or vinyl posts).
  • SIZE SPECIFICATION: Length 3"* Width 2" * Height 1.
Check Stock

Professional Heavy Duty Hog Ring Pliers Made in USA

  • PVC grips, straight steel design, approximately 7inches in length Coops, Sausage and Meat Casing, Fencing Repairs, Traps, and So Much More!.
  • Spring-loaded to hold hog rings in jaws,.
  • Designed for us in auto upholstery, car seat heater heated heating cooler cooling cool, Animal pet cage, dog cage, cat cage, fence, railing, car seat cover.
  • Works with most hog rings, sizes: 3/4, 1/2, 3/8 inch.
Check Stock

Sowtowe Cable Railing Hardware, 20 Pairs Stainless Steel Cable Railing Kit,for 3/16 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Fit for 3/16 cable railing,This adjustable angle cable railing kit can be freely adjusted between 0 and 180 degrees, suitable for outdoor or indoor use.
  • The railing kit is made of high quality marine grade T316 stainless steel Thick Plate, which is rust-proof, durable and beautiful and easy to maintain.
  • This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for deck railing and garden fences, inclined stair railing or horizontal cable guardrail.
  • Cable railing hardware Kit, can be used in cable railing systems of various angles, for wood post and metal post,3/16" inner diameter, ideal for connecting to 3/16 inch stainless steel cable to wood post and metal post.
  • This product includes 20 Pcs Deck Toggle Turnbuckles, 20 Pcs Deck Toggle Ends and 82 Pcs (2 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod, 1 multifunctional small wrench..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

BABY MATE 8 PCS Medical Grade Clear Baby Corner Guards (Ball Shape, Matte Finish) - Baby Proofing Corner Protector - Child Proof Corner Cover Corner Bumpers - Baby Safety Corner Guards 11473

  • MEDICAL GRADE PVC, COMPLETE CHILD SAFETY – Made of 100% Non-Toxic MEDICAL GRADE PVC – Can contact directly with foods or be bitten by kids, unlike other PVC materials used by competitors – MEDICAL GRADE PVC has a distinctive look (with a tint of blue as plastic devices in hospitals) from other PVC materials..
  • BALL SHAPE CORNER GUARDS WITH MATTE FINISH – Spherical bumpers absorb impact better to protect your baby from painful bumps – Suitable for right-angled “corner” tables, chairs, cabinets, etc – Can protect walls and furniture when move – Clear corner guards keep the beauty of your furniture..
  • GUARANTEED TO STICK – These thicker gel-like adhesives are specially custom made for our ball shape corner covers, bringing stronger adheres – Curved edges with child proof design – ideal for flat and clean surfaces with right angles like wood, tile, glass, metal and plastic – Guaranteed TO STICK!.
  • CUSTOM MADE TRACELESS ADHESIVES – NOT ONLY keep the corner protectors securely fastened, BUT ALSO are easy to remove without damaging your loved furniture – Heat the corner protectors with a hair dryer for a minute or two and allow adhesive to soften, lift from one side and peel....
Check Stock

Deck Man 1/8 inch T316 Stainless Steel Adjustable Angle Single-Screw Cable Railing Kit/Hardware for Wood Posts，Marine Grade (30 Pairs)

  • APPLICABLE: Standard size 2 "x4" (Actually 1.5 "x3.5") Deck Railing Connectors. Suitable for the installation of outdoor deck wood railing..
  • HIGH QUALITY: Deck Railing Bracket is high quality 304 stainless steel material one casting, it is absolutely Safe and Reliable, Never Rust. Our Deck Railing connectors are absolutely strong and safe compared to cheap products made of ordinary ABS, PP, nylon and other composite materials, You Don’t have to worry about it being attacked by rain or high temperature And weathering resulting in fracture..
  • SPECIFICATION SIZE: (W)2"*(L)4"(Actually/1.5"x3.5"),WIGHT/0.5lb..
  • EASY INSTALLATION: 1. Fit the deck railing connector to the top of the horizontal batten, drill pilot holes using a hand drill, and lock with drilling screws (corners and edges of the railing ends may need to be sanded/trimmed due to errors in the exterior dimensions of the wood). 2. Align the horizontal batten to the pre-installation position of the post, drill pilot holes using a hand drill (drilled at 30°), and lock with screws separately to complete the installation..
  • INCLUDE: The kit is equipped with all the accessory screws and can be installed immediately.(Deck Railing Bracket connectors.
  • Black coating 304 Stainless Steel screws-fix the Deck Ra....
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Sekey Garden Privacy Fence Screen, 2.6'x9.8' Mat Weatherproof Reinforced Privacy Protection for Garden Fence, Fences Privacy Protection for Balcony and Terrace, with Cable Ties, Bamboo Fencing

  • DURABLE PVC MATERIAL WITH REINFORCED SUPPORT: Glued plastic pipes of high quality offer the required stability (no recycled PVC material). Stronger stability with additional supports in each tube. This makes the protective grille stronger, more durable and windproof than other hollow PVC pipes..
  • BEAUTIFUL TEXTURED PIPE SURFACE, PERFECT DECORATION AND VERSATILE APPLICATION: The convex lines on the pipe surface can not only increase stability, but also prevent scratches and bends. They serve as a design element, privacy screen and decoration for balcony, garden, terrace and much more..
  • RESISTENT: The PVC material is weatherproof a quick-drying It is washable and waterproof. The privacy screen easily withstands seasonal weather influences. A great alternative to conventional bamboo / reed and wicker mats..
  • EASY TO INSTALL, EASY TO SHORT: Simply attach to a railing or similar using cable ties (included in the scope of delivery). Slightly shorten the width and height with a knife or scissors..
  • If you have any problems, please contact our customer service. We will try to find a satisfactory solution for you as soon as possible..
Check Stock