ReviewsPvc Processing Machinery

4 x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

2.5\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

MoKell 10pcs CY-15H 5/8-inch Bearing Steel Roller Ball Flange Conveyor Transfer Unit

  • SIZE: 5/8 inch diameter ball bearing roller, 360 degree rotation..
  • CAPACITY: With a load bearing capacity of 22 lbs. each..
  • MOUNTING:Two screw holes, Mounting Hole Dia: 4mm/0.16-inch..
  • PACKAGE: 10pcs x Ball Transfer Unit +1pcs Screw Driver, screws are included here..
  • APPLICATION:Widely used in transmission system, feeding system, processing system, processing machinery..
Check Stock

2 1/2 x 20 Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2 Ports Ideal for Shop Vacuums

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

HLMOptimo 5/8 Roller Ball Transfer Bearings CY-16B 33 Lbs Total Load Capacity Set of 12

  • SIZE--5/8" diameter ball bearing roller, 360 degree rotation.
  • MOUTING SIZE - Mouting Hole Diameter: 4mm/0.16".
  • LOAD BEARING CAPACITY-- Made of bearing steel, Support up to 33Lbs/15kg each.
  • APPLICATION:Widely used in transmission system, feeding system, processing system, processing machinery..
  • PACKAGE: 12pcs x Ball Transfer Unit ,screws are not included here..
Check Stock

5\ x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

6 x 10 6 inch diameter by 10 feet long Ultra-Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Cable Pulling Chain, Black Nylon Cable Pulling Chain, Flexible Nested Cable Pulling Chain with Less Noise for 3D Printer Parts, Engraving Machines,(S25 x 57 0.7M)

  • Top quality: Cable carrier made of high quality nylon 66 materials, low temperature resistant -25 , heat resistant 100 , strong and durable..
  • Widely used: cable pulling chain suitable for 3D printing, CNC machine tools, electronic equipment, fire fighting equipment, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • Low noise: the surface of the drag chain is shiny and strong, which reduces the air tube drag and low noise, making the working environment quieter..
  • Exquisite workmanship: e-chain made of high-quality materials for thorough processing, greatly extends the product life cycle..
  • Convenient: The pull chain can be disassembled and connected at any length to meet the needs of work, easy to install and maintain..
Check Stock

BokWin 8Pcs 1/2\ Roller Ball Transfer Bearings Flange Mounted Nylon Ball Transfer Unit for Conveyor, Roller Stand, Transmission, Load Capacity 22 lbs

  • 【CAPACITY】Each bearing unit with a load capacity of 22 lbs..
  • 【SIZE】16 Pcs 5/8 inch diameter ball bearing roller, 360-degree rotation..
  • 【Material】Stainless steel & nylon, the ball has the function of resist compression..
  • 【MOUNTING】Two screw holes, Mounting Hole Dia: 4mm/0.16-inch..
  • 【APPLICATION】Widely used in the transmission system, feeding system, processing system, processing machinery..
Check Stock

Micarta Paper XX Phenolic Sheets .188\ (3/16\) Thick x 12\ x 36\ 3 pcs

  • ...-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock