ReviewsPvc Soft Pipe

8Pack 4-Way PVC Fittings, 1' Furniture Grade Elbow Fitting for Building Heavy Duty PVC Furniture, SCH 40 4-Way Side Outlet Tees, PVC Conner Fittings for Greenhouse Shed Pipe Fittings Tent Connection

  • FURNITURE 4-WAY PVC FITTINGS——The PVC elbow fittings are made from Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building heavy duty PVC furniture, such as dog beds/hammock and garden project.
  • FIT FOR 1-INCH SCH 40 PVC PIPE——Package includes 8 x 1” PVC FITTINGS, fits Sch.40 1” PVC Pipe, which has actual OD 1-5/16” or 1.315” and an inside diameter of 1”(Sch.40 or Sch.80 PVC pipe).
  • PROFESSIONAL PERFORMANC 4-WAY TEE——The furniture PVC connector is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • IMPACK PROOF SOLID PVC FITTINGS——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are designed for building heavy duty PVC furniture and constructing structure of PVC pipe, such as greenhouse connections, kids’ forts and tents cat enclosure, PVC cages, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe sc....
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact drill, it works more efficiently than the round head reaming tool. (The drilling speed should not be too fast.) The drill bit is made of durable and wear-resistant bearing steel, which is not easy to break, wear-resistant and durable..
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

PVC Pipe Cutter, Cuts up to 2-1/2\

  • 【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
  • 【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
  • 【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
  • 【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
  • 【Easy to operate】：The pipe cutter i....
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

Libraton PVC Cutter 1-5/8\

  • 【Heavy Duty & Premium Quality】The Libraton PVC pipe cutter body is made of durable hardness aluminum alloy steel. The thick 2.5mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide ....
Check Stock

SDTC Tech 12-Pack U-Shaped PVC Water Pipe Clamps Fit for 25mm OD, Compatible with 3/4" ID PVC Pipe

  • 1" Inner Diameter U-Shaped PVC Pipe Support Clips suit for water supply systems for civil and industrial constructions, not easy to deformation and durable..
  • Fit Pipe OD: approx 25mm / DN20, compatible with 3/4" ID SCH 40 PVC Pipe..
  • Made of high quality PVC, with tight structure, Toughness and high strength, can fix and protect the pipelines well..
  • Comes with screws and hollw wall anchors, easy and convenient for installation, and keep your pipe close to the wall..
  • Package includes 12pcs PVC Pipe Clamps + 12pcs hollow wall anchors + 12pcs mounting screws..
Check Stock

FORMUFIT F034CRX-UV Cross PVC Fitting, Furniture Grade, 3/4\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration..
  • WORKS WITH 3/4" SIZE PVC PIPE: Fits 3/4” Size PVC Pipe, which has an outside diameter of 1-1/16" (1. 050”).
  • MADE TO LAST: : UV resistant PVC material resists fluorescent lighting degradation. Lasts for years in indirect sunlight without yellowing, discoloration or cracking.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

CIRCOPACK Screw Tab Caps for Schedule 40 PVC Pipes Furniture Grade (2 pieces) (1-1/2 inch)

  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 1-1/2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
Check Stock