ReviewsPvc Steel Conduit

Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia

Made in USA. Use with Sealproof straight or right angle connectors.
can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
outdoor, sunlight resistant, direct burial..
Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
UL Listed Underwriter's Laboratories File No. E-129973.
UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.

Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
for original equipment manufacturers or field installers. 0 Ring and steel locknut included.

Check Stock

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..

Check Stock

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

Check Stock

Morris Products 14940 EMT Compression Connector, Steel, 1/2\ Trade Size (Pack of 25)

EMT Compression Connectors - Steel - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure..
Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures.

Check Stock

FirmiBang Liquid Tight Connector 3/4 in - Non-Metallic Electrical Conduit Fittings, UL Listed PVC Conduit Fitting (Straight, 5 Pack)

▲PREMIUM QUALITY - Liquid tight connectors are made of high-impact PVC, Flammability rating 94V-2, Temperature index 125 ° C. Rust and corrosion resistant..
▲Easy to install - FirmiBang flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule..
▲Wide Application Range - Electrical conduit connector is suitable for indoor or outdoor use. Connects type B non-metallic liquid-tight conduits to weatherproof outlet boxes, pool and spa equipment motors, central air-conditioning units and various other electrical enclosures and hubs..
▲PACKAGE - Each connector comes with a sealing washer and locknut. We have different models of liquid-tight connectors to meet your different needs..
▲After-sales guarantee - If you have any question with our liquid tight connectors , Feel free to contact us. We will answer you as soon as possible..

Check Stock

YUENTOEN Deburring Tool Kit - Deburring Cutters Set with 11 Pcs HSS BS1010 Sharp Deburring Blades + Handle Burr Removal Blades Burr Remover Hand Tool for Wood Plastic Aluminum Copper Steel

【High Quality】The blades are made of tempered high-speed steel which makes blade hardness and toughness excellent and resistant to wear. HSS steel is usually longer lasting than regular steel. Long-time using hand deburring tool for you..
【Small Size】The burr handle size is 125mm*21mm (Length * Diameter) and the blade size is 47mm*3.2mm (Total length * Diameter). The deburring cutters designed with small size, you can carry anywhere..
【Strong Cutting】 Compared with the use of grinding wheels or other dehairing tools, these tools are adopted sharp cutting edge for quickly cutting, machining surface are high smoothness..
【Flexible to Use】The blade is mounted on the handle can be rotated 360 degrees. Simply pressing the button on the deburring cutter to replace the blade mount to install, provide you with simple and easy to use deburring blades..
【Wide Application】 Works on wood, metal, steel, copper, aluminum, plastic, PVC tubing, tin, PVC tubing, conduit, and clean up 3D printed parts. From home use DIY projects to professional industrial applications, maximum to satisfy your need on edge deburring tool..

Check Stock

CURRENT TOOLS 450 PVC Heater - ½” to 2” PVC Conduit Bending Heater with Reflective Interior & Carrying Handle

PVC BENDING MADE EASY - Uniquely designed for quick, precise heating of PVC in the workplace.
EVEN HEATING - Highly reflective interior provides even, consistent PVC heating.
HEATING CAPACITY - 115 vac, 7000 watts, and 15 amps.
USER FRIENDLY - Comes standard with a full length door allowing for easy loading and removal of PVC conduit.
MADE IN THE USA - Proudly designed and crafted at our manufacturing facility in Greenville, SC.

Check Stock

Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included (1/2\ Dia. x 50 ft)

Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

Check Stock