ReviewsPvc Steel Thread Hose

4FT Stainless Steel Washer Hoses with 90 Degree Elbows by Beaquicy - 2 Pack No-Lead Burst Proof Hot & Cold Water Connection Inlet Washer Supply Lines

...oth high and low temperature environments..
✅【Safety and Durable】---Stainless Steel Washer Supply Hose 4 Ft use true 304 stainless steel for braided outer protective cover , can effective protection against rust and leaking. washer hose 4ft has a 3/4-inch female hose thread connection, and the laundry hoses are equipped with 90-degree elbows on one end for an easy and smooth installation in tight spaces. braided washer machine hoses fit for almost all washers..
✅【100% Brand New and High Quality】---The washing machine hoses 4ft 2 pack are made with Lead free, Pvc core, Extra-thick Rubber washer, 100% pure rubber internal hose, ultra-high tensile strength braided stainless steel hoses, which can preventing water leaks kinking crimping and corrosion.Washing machine hot and cold water hoses can be easily connected to the ordinary household water supply line in the laundry room and solve the housework of laundry..
✅【Easy to Install】---Unplug the washing machine and turn off the water supply before making any repairs.First remove the old washer water lines from the water supply faucet, and screw the new stainles....

Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

STYDDI Garden Hose Repair Kit, Solid Brass Mender Female and Male Hose Connector with Clamps, Fit All 1/2-Inch Garden Hose, 4 Set

... repair kit for extending the service life of your hose..
SUITABLE FOR 1/2″ INCHES HOSE – This hose repair kit is designed basing on the inner diameter of the 12.7mm hoses, so it is great for the devices which accept 1/2″ inches connection, such as garden hose, water tap etc..
US STANDARD 3/4″ THREAD FOR A WIDE RANGE OF APPLICATIONS – The female thread adapter and male thread adapter are US standard 3/4″ thread, and suit for 3/4″ standard threaded which has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkler, nozzle, etc..
EASY TO INSTALL WHEN CONNECTING OR REPAIRING HOSE – This hose repair kit contains all you need to connect a hose or repair a hose. They are easy to connect and disconnect, and they could hold up for a long time. Repairing your hose can be done in about five minutes and making the hose work even better than before. This kit could definitely save you from having to buy a new whole hose..
All THE PRODUCTS INCLUDED IN THIS KIT IS REUSABLE – This hose repair kit includes 4 solid brass Female connectors, 4 solid brass Male connectors, 8 stainless steel clamps and 8 gaskets. They are ready for immediate use and reusable for futur....

Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...g process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

ANPTGHT Hose Barb Fitting Elbow 3/8 Hose Barb x 1/2 Male NPT Barbed Adapter for Fuel Gas Liquid Air Pack of 5

【Material】Plastic barb connector, made of high-quality PP（Polypropylene） material.
【Size】3/8" Hose Barb x 1/2" Male Male thread..
【Usage】Plastic hose barb can be easily connected with tubing hose line and female thread..
【Advantage】 Barbed fittings can be used with PVC, PU, Rubber hose or tubing Easy to install and not easy to drop off, good strength and durability..
【Wide range of use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..

Check Stock

Frienda 2 Pieces Flexible Racing Fuel Filler Hose Clear Racing Fuel Jug Hose Utility Jug Hose Gas Can Hose for Racing Fuel Jugs LC2 Jugs Auto Fuel Filler Hose Racing Fuel Container Gas Can Fuel Tank

What you will get: there are 2 pieces of racing fuel jug hoses in one package in total, they come in clear.
The racing fuel jug hose consists of a hose and thread combination, which is easy for you to use.
Sufficient quantities also allow you to replace them according to actual needs.
Thread design: the thread design of the clear racing fuel filler hose can be well connected to the tank and the vehicle, which can avoid fuel side exposure or dripping when dumping, preventing the dust from entering the tank and keeping the tank and the vehicle clearer.
Easy to install: the flexible fuel hose is easy for you to use, it has a simple operation, which is a good way to save your time and energy, and increase your productivity.
The simple use method is also very nice for novices, you do not have to worry about trouble when you use it.
Reliable material: the auto fuel filler hose is made of PVC, which has the characteristic of flame retardant, reliable and quality.
This material is also sturdy and strong, not easy to break and has a long service time, so you can use it with confidence.
Multiple applications: the PVC racing fuel jug hose can be applied in a variety of scenarios, it is ideal for assisting the fuel tank in professional off-road and closed race ....

Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....

Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
-30 degree to 100 degree F temperature range..
BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
Size: 16mm or 5/8″ Barb x 3/4″ G Male.

Check Stock

PVC Garden Hose Adapter (1" NPT x 3/4" GHT)

1″ Male NPT and 3/4″ Garden Hose Thread (GHT).
Perfect Solution for connecting to a garden hose via a 1″ ball valve.
Available sizes in 1/2″, 3/4″, 1″, 1.25″ and 1.5″ garden hose adapters.
1″ MNPT Flotec FP13-43 Adapter Replacement Substitute Part.

Check Stock