ReviewsPvc Weld Equipment

J-B Weld Company 8265-S 3 Pack Original Steel Reinforced Epoxy Twin Pack, Dark Grey

  • J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour. J-B Weld SteelStik set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

J-B Weld WaterWeld 1 Hour Cure Epoxy Putty Stick - 2 Pack Off-White 8277-2

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml

  • J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
  • Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
  • Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.
Check Stock

KUNWU Stainless Steel TIG Welding Rods ER308L 2.0 mm 5/64\ x 36\ (1 Lb)

  • Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347.
  • Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion.
  • Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications.
  • Note: This product is 5/64 inches (2.0 mm) in size, this diameter is a little more bigger than 1/16 inches (1.6 mm) and smaller than 3/32 inches (2.4 mm), the straight length of 36 inch packaged in a PVC tube (Random Color).
Check Stock

Astro Pneumatic Tool 4526 Yellow 4\ Plastic Spreader, Box of 100,4 Inch

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey.
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped.
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc.
Check Stock

J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey.
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped.
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc.
Check Stock

J-B Weld KwikWeld, 6 Minute Set Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8276-2)

  • J-B Weld Kwikweld: A Fast Setting Version Of The Original Cold Weld Two-Part Epoxy System That Provides Strong, Lasting Repairs To Multiple Surfaces. Perfect For Diy Household, Automotive, Marine, Craft Repair And Much More.
  • Cure And Set Time: After Mixing The Tubes At A 1: 1 Ratio, It Takes 6 Minutes To Set And 4-6 Hours To Cure. Once Cured, Kwikweld Can Be Tapped, Filled, Sanded, Molded And Drilled. Kwikweld’s Set And Cure Color Is Dark Grey..
  • Versatile And Dependable: J-B Weld Kwikweld Is Steel Reinforced, Has A Tensile Strength Of 3127 PSI And Can Withstand Temperatures Up To 230 Degrees Fahrenheit (110 Degrees Celsius). When Fully Cured, Kwikweld Is Waterproof And Resistant To Petroleum, Chemical And Acid..
  • Surface Applications: Metal, Plastic & Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And More.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Cup Drying Stander Holder for Cup Turner Machine Kit, Drying Stander Holder with Pipe, DIY Glitter Epoxy Tumblers Cup Turner Kit (Rack, White)

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performanc....
Check Stock

110V 1600W Professional PVC Roofing Welding Tools Heat Gun Kit Plastic Welder Hot Air Weld Gun with Roofing Seam Rollers Seam Tester Probe Weld Nozzle  (Hot gun)

  • Protection class: II (double insulation).
  • Weight: 1.3 kg with power cord per heat gun.
  • [Application]: Repairing tarpaulins and tents Sealing advertising banners.
  • Welding PVC vinyl decking flooring coverings and linoleum.
  • Welding PVC / TPO / EPDM single ply roofing membranes.
  • [Kit includes]: 1pcs x Hot air welding gun (120V / 1600W) .
  • 1pcs x Replacement Heating elements with mica tube.
  • 1pcs x Seam tester probe, plastic handle.
  • 1pcs x 10" (250mm) Heavy duty roofing scissors.
  • 1pcs x 5mm Round weld nozzle 1pcs x 5mm Round speed weld nozzle.
  • [Warranty]: One year warranty, not include the heat element..
Check Stock

J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 ml 3 PACK

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of....
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set....
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And....
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc.
Check Stock