ReviewsPwm Control

Noctua NF-A12x15 PWM, Premium Quiet Slim Fan, 4-Pin (120mm, Brown)

Premium quiet slim fan, 120x120x15 mm, 12V, 4-pin PWM, max. 1850 RPM, max. 23.9 dB(A), >150,000 h MTTF.
Award-winning A-series design with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
120x15mm slim design ideal for low-profile CPU coolers, HTPCs, ITX builds, space-restricted applications etc..
4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 1850rpm maximum speed (1400rpm with supplied Low-Noise Adaptor).
Includes anti-vibration mounts, fan screws, extension cable and y-cable for running two PWM fans on the same header.

Check Stock

Noctua NF-A14 PWM, Premium Quiet Fan, 4-Pin (140mm, Brown)

Premium quiet fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 24.6 dB(A), >150,000 h MTTF.
Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
Square frame design is ideal for water cooling radiators (AIO or DIY), PC cases and other chassis (intake & exhaust), cabinet ventilation, etc..
4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.

Check Stock

Noctua NF-A8 PWM Premium Quiet Fan 4-Pin 80mm Brown

Premium quiet fan, 80x80x25 mm, 12V, 4-pin PWM, max. 2200 RPM, max. 17.7 dB(A), >150,000 h MTTF.
Award-winning 80x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
8cm format is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other....
4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 450-2200rpm speed range (1750rpm max. with supplied Low-Noise Adaptor).
Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.

Check Stock

POWER ACOUSTIK BAMF1-5000D BAMF Series Monoblock Class D Amp (5,000 Watts...

Bass Restoration with Lighted Display, Illuminaited Logo Plate and Chrome Finish. Eyes Light up with Red LED's.
Max.Bass Control with Dash Mount Remote Control for PFM Subsonic Filter & Bass Level Control.
Balanced Inputs, Bass Output Control with PWM High Head Room Power Supply.
Output Level: 13.5 volts, Frequency Response: 10Hz - 100KHz.
THD: 0.002%, S/N Ratio: 132dB, Balanced Input Noise Rejection: 60 dB.

Check Stock

Corsair ML140 PRO 140mm Premium Magnetic Levitation RGB LED PWM Fan with Lighting Node Twin Pack (CO-9050078-WW) & iCUE Commander PRO Smart RGB Lighting and Fan Speed Controller

Product 1: Magnetic Levitation Bearing: Dramatically reduces bearing friction by magnetically levitating the fan blade, producing lower noise and higher performance. Air flow - 55.4 CFM. Noise level - 20.4 decibels.
Product 1: Dynamic RGB Lighting: Four independent ultra-bright center-mounted RGB LEDs output a vivid blast of light and color.
Product 1: Control, Customize and Sync: The included CORSAIR Lighting Node PRO enables stunning dynamic lighting effects with other CORSAIR LINK supported devices.
Product 1: Complete PWM Control: Dynamically control fan speed from 400 RPM to 1,200 RPM to minimize noise or maximize airflow.
Product 2: The CORSAIR iCUE Commander PRO turns your case into a smart case, using CORSAIR iCUE software to control up to 6 case fans and 2 RGB lighting channels..
Product 2: Powers up to 6 DC or PWM fans with voltage and PWM control, including the ability to run at zero RPM for total silence..
Product 2: 2 RGB lighting channels provide powerful software control of CORSAIR individually addressable RGB LED strips and CORSAIR RGB fans..
Product 2: 4 repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with CORSAIR iCUE software..

Check Stock

Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)

Premium quiet fan, 80x80x25 mm, 12V, 4-pin PWM, max. 2200 RPM, max. 17.7 dB(A), >.
Award-winning 80x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
8cm format is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc..
4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 450-2200rpm speed range (1750rpm max. with supplied Low-Noise Adaptor).
Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.

Check Stock

PCA9685 16 CH 12Bit PWM Servo Motor Driver Board Controller IIC Interface for Arduino Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ and Robot (2pcs)

Contains an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying up your microcontroller.
5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage.
Supports using only two pins to control 16 free-running PWM outputs – you can even chain up 62 breakouts to control up to 992 PWM outputs..
3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers..
12-bit resolution for each output - for servos, that means about 4us resolution at an update rate of 60Hz..

Check Stock

SoarUp 35A 4 in 1 ESC, 48mhz Frequency Throttle Response BLHeli‑32 4 in 1 ESC for FPV Traversing Machine

35A ESC and Advanced SMTs: Integrate 4 high performance 35A ESCs, built in galvanometer, and purchase new advanced SMTs. After such high integration, the volume is only the same as that of the control of the traversing aircraft, so the installation.
Hardware PWM and Damped Light Technology: Hardware PWM drive motor, less noise, more throttle response. Damped Light technology, regenerative braking function, make motor deceleration more sensitive and effective, control more accurate.
BLHeli‑S Firmware and ESC Setting: Using BLHeli‑S firmware has powerful performance and rich functions.
it also supports setting ESC parameters in various ways, or upgrading ESC firmware (such as setting or upgrading ESC via throttle signal line, using ot.
Support and Input Output Line: It not only supports ordinary PWM throttle signal mode, oneshot 125, oneshot 42 and multshot ultra high speed throttle signals, but also supports the latest dshot150 / 300 / 600 digital throttle, with strong anti interferenc.
Main Control Chip and PCB Production: EMF8BB21F16G main control chip, operating frequency up to 48mhz. For mosfet, three in one IC driver and high quality high frequency ceramic capacitor. In high end PCB production process, pads are metallized to avoid p.

Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
it is designed for enthusiasts with need for controlling numerous system fans..

Check Stock

Mcbazel Tuact Silicone Gel Anti-slip Stick for Venom-X4 Mouse Wand Controller

Premium quiet fan, 120x120x25mm, 12V, 4-pin PWM, max. 2000 RPM, max. 22.6 dB(A), >150,000 h MTTF.
Next-gen A-series design combines high airflow and high static pressure performance, ideal both as a case fan and for CPU coolers, watercooling....
State-of-the-art engineering (AAO frame, Flow Acceleration Channels, record tight 0.5mm tip clearance) and construction (Sterrox LCP material,....
4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 2000rpm maximum speed (1700rpm with supplied Low-Noise Adaptor).
Includes anti-vibration mounts, radiator gasket, fan screws, extension cable and y-cable for running two PWM fans on the same header.

Check Stock

Endlesss PWM Fan Splitter Cable 4 Pin Black Sleeved Case Fan Splitter Cable 1 to 3 Converter Braided Y Splitter Computer PC Fan Extension Power Cable 10.5 Inches (2 Pack)

HIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage..
2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector.
the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
MANY FUNCTIONS: The PWM case fan splitter provides better power supply for motherboard fans, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs to increase the lifespan of the motherboard..
For 3-PIN & 4-PIN FAN: The 2-way PC PWM fan splitter power cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans.
this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
CPU FAN EXTENSION: The pc fan extension cable 3-pin & 4-pin compatible is designed for enthusiasts with need for controlling numerous system fans..

Check Stock