ReviewsPwm Controllers

Renogy 100 Watt 12 Volt Portable Waterproof 20A Controller, Foldable 100W Panel Suitcase with Adjustable Kickstand Solar Charger for Power Station Camping Off Grid, Panel-20A

【Plug and play solar kit 】complete kit includes a 100W solar suitcase, a 20A waterproof charge controller, and alligator clips. Compatible with multiple kinds of 12V batteries, easily add to your existing system..
【Highly portable design】 foldable solar suitcase small in size, provide more flexibility for outdoor and off-grid use, easy to carry, store and set up..
【Remarkable efficiency】Renogy solar panels using grade A plus monocrystalline solar cells. Advanced smart PWM technology charge controllers ensure charging efficiency and safety..
【Reailable quality】coming with a premium rugged canvas protective case, heavy-duty handle, and latches for longevity..
【Safety guarantee】multiple protections provided by the charge controller keep your battery and system fully protected..

Check Stock

Solar4America 10A 20A 30A PWM Solar Charge Controller 12V/24V Automatic, with LCD Display, for Solar Wind Power Generator System (20A)

[Versatile] Our PWM charge controllers automatically identify the system voltage and temperature compensation allows for charging parameters to be automatically updated..
[Durable and Safe] The charge controller provides charging options for lead-acid and lithium batteries. Additionally, the controller allows for an extension of battery life by preventing non-equalization and sulfuration while providing protection for over-charge, over-discharge, overload, short-circuit, and reverse-connection..
[Easy to Use] Each controller comes with a graphic LCD screen and 2-key button interface to allow for ease of use. The included RJ12 data port can be used to connect your controller to our Solar4America Apollo monitoring software and mobile phone application..

Check Stock

EK-CoolStream Classic PE 360 Combo Pack with Free Tape Measure Tool

Combo kit comes with: 1 Radiator, 3 RGB fans, 1 fan splitter, 1 radiator gasket AND a FREE Tape Measure Tool!!.
EK-Vardar RGB fans is its simplicity as it uses standard 4-pin 12V RGB connectivity.
Dimensions: 393 x 120 x 45mm (L x W x H).
EK-Cable Y-Splitter 3-Fan PWM is a simple adapter used to hook two DC or PWM fans to one motherboard 4-pin PWM or 3-pin DC FAN connector..
Connect three (PWM) fans from one (PWM) fan header.

Check Stock

PC Interface Controller

【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
(current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.

Check Stock

Renogy 200 Watt 12 Volt Monocrystalline Solar Panel Starter 20A Rover MPPT Charge Controller/Mounting Z Brackets/Tray Cable/Adaptor Kit for RV, Boats, Trailer, Camper, Marine,Off-Grid System, 200W

This kit includes our 20A MPPT charge controller which uses Maximum Power Point Tracking technology, transferring power up to 30% more efficiently than PWM charge controllers.
With a Renogy 200W Monocrystalline Starter Kit MPPT, you won't have to wonder about whether you're getting the most out of your system.Frame:Anodized Aluminium Alloy.
Monocrystalline solar cell efficiency: 21%.
MPPT charge controller peak efficiency: 97%.Temperature: -40°F to +185°F.
You can expand your system up to a maximum of 200W (12 Volt) or 400W (24 Volt) with a Renogy 20A MPPT Charge Controller.
Order will be delivered in multiple packages.

Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....

Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..

Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....

Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
it is designed for enthusiasts with need for controlling numerous system fans..

Check Stock

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..

Check Stock

Endlesss PWM Fan Splitter Cable 4 Pin Black Sleeved Case Fan Splitter Cable 1 to 3 Converter Braided Y Splitter Computer PC Fan Extension Power Cable 10.5 Inches (2 Pack)

HIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage..
2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector.
the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
MANY FUNCTIONS: The PWM case fan splitter provides better power supply for motherboard fans, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs to increase the lifespan of the motherboard..
For 3-PIN & 4-PIN FAN: The 2-way PC PWM fan splitter power cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans.
this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
CPU FAN EXTENSION: The pc fan extension cable 3-pin & 4-pin compatible is designed for enthusiasts with need for controlling numerous system fans..

Check Stock