ReviewsPwm Motor Controller

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps

  • PWM Duty Cycle:0%-100% and Quiescent current is 0.04A( not over 40mA when voltage is DC10V to DC30V).
  • Operating temperature:-20 to 40.It can perform normally when the temperature is below 0.
  • Universal speed controller can be used for DC brush motor, suitable for car cooling fan motor, car air conditioning motor, exhaust blower, treadmill motor, etc.
  • This motor speed controller can also be used for dimming DC lamps or controlling DC heater.
Check Stock

DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch & Knob

  • Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W..
  • Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
  • Speed Control: our motor control board can regulate motor speed by potentiometer.
  • what's more, it support clockwise/anticlock-wise rotation adjustment..
  • Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative.
  • thick blue wire for the motor positive, and the thick green for the motor negative..
  • PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient..
Check Stock

Laguna 12|16 Midi Lathe EVS

  • Controller: pulse width modulation (PWM).
  • Recommended breaker size: 110V – 15 amp.
Check Stock

AlveyTech Currie 24 Volt 30A 5-Pin Controller for Series 500, 650, 750 (24 Volt Versions), & 900 eZip, IZIP, Mongoose, & Schwinn Scooters

  • This scooter controller is compatible with your version of Currie scooter only if your current controller has the identical connectors as shown in the picture and described below..
  • The 24 Volt 30 Amp 5-pin throttle connector diagnostic controller is an exclusive Currie Technologies design, with Currie's PWM Smart Power Microprocessor. The controller is fully waterproof, with brake inhibit power cut off..
  • Controller comes with the connectors pre-installed. Note that one of the connectors has five pins, this is the throttle connector. Not compatible with 3-pin or 6-pin versions..
Check Stock

DaFuRui 2Pack Upgraded 6V-90V 15A DC Motor Pump Speed Controller，16KHZ PWM Speed Controller Regulator Module Board with Speed Control Knob (6V-90V 15A DC Motor)

  • ★Upgraded 6V-90V 15A DC Motor Pump PWM Speed Controller and PLC voltage can be directly controlled..
  • ★Its own power supply reverse polarity protection, control voltage over-voltage protection, 20A fast-blow ceramic fuse..
  • ★Adjust the order of the cable to change the orientation，can control motor speed to change from 0 percent to 100 percent..
  • ★Adjust the knob of potentiometer to change the output occupying Vacancy proportion of controller, and the motor speed will change..
  • ★Rated Current: 8A, Max Current: 15A, Quiescent Current: 0.005A (Standby)..
Check Stock

PEMENOL Motor Speed Controller PWM DC 5V 12V 24V 150W Adjustable Speed Regulator with Stepless Variable Rotary Switch PWM Signal Generator Driver Module

  • ★Digital Rotary Encoder Button: The rotary encoder adopts the principle of digital pulse, the output will be as much as you rotate it, and the same value will be input when you rotate it next time. Good repeatability, high precision, can be quickly adjusted to the value you want.
  • ★Soft-start Protection: The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.
  • ★Duty Cycle, Duty Cycle Upper and Lower Limits and Working Frequency Can Be Set: The 3 digits LED motor speed regulator can adjust the duty cycle, the upper and lower duty cycle limits and the operating frequency. Convenient for customers to use according to the working characteristics of their own motors. The adjustable electronic speed controller can automatically save the set parameters to prevent data loss after a power failure.
  • ★With the Start and Stop Button: The PWM DC motor governor with start and stop button, and can be controlled by an external switch, meet your multiple control needs. Maximum power: 150W. Working voltage: DC5V~30V, input with anti-reverse connection protection.
Check Stock

BIQU LCD 12864 Version Graphic Smart Display Controller Module with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

AC Infinity AIRLIFT S10, Shutter Exhaust Fan 10\ with Speed Controller, EC Motor - Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops

  • A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces..
  • Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls..
  • Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels..
  • Features steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust..
  • Fan Size: 10” | Dimensions: 13.0 x 13.0 x 5.9 in. | Airflow: 631 CFM | Noise: 67 dBA | Bearings: Dual Ball.
Check Stock

AC Infinity AIRLIFT S14, Shutter Exhaust Fan 14\ with Speed Controller, EC Motor - Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops

  • A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces..
  • Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls..
  • Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels..
  • Features steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust..
  • Fan Size: 14” | Dimensions: 16.93 x 16.93 x 8.1 in. | Airflow: 1513 CFM | Noise: 68 dBA | Bearings: Dual Ball.
Check Stock

AC Infinity AIRLIFT S16, Shutter Exhaust Fan 16\ with Speed Controller, EC Motor - Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops

  • A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces..
  • Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls..
  • Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels..
  • Features steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust..
  • Fan Size: 16” | Dimensions: 19.09 x 19.09 x 7.72 in. | Airflow: 2560 CFM | Noise: 70 dBA | Bearings: Dual Ball.
Check Stock