ReviewsQuick Assembly Connector

ORCISH Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer (White)

Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
Easily installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
Stable working environment: there are 12 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.

Check Stock

POWERTEC 70123 O.D. Splice, 4\

INCLUDES: 4" Dust Collection Hose Connector.
FUNCTION: Provides a secure, quick connection between two 4-Inch ID dust hoses - extending the reach and versatility of most standard dust extraction set-ups.
FEATURES: Tapered ports on each end, a raised middle section diameter to provide easier assembly and comfortable grip.
PREMIUM BUILD: This dust hose coupler is made out of high quality ABS plastic, which is primarily known for it's abrasion resistance, high tensile strength, and long-term durability.
DIMENSIONS: Dual 4-Inch nominal ends measuring at 3-31/32-Inch O.D. and 3-11/16-Inch I.D. - to accommodate all 4" ID hoses.

Check Stock

Mr. Heater F271803 12ft Big Buddy Hose with Regulator,Multi

Propane hose assembly for use only with Mr. Heater Big Buddy indoor/outdoor heater. Solid brass fittings.
POL connection connects directly to twenty pound propane tank. Hose material stretch tested to 400 psi.
Regulator reduces high pressure of 1.3 gallon tanks and larger to low pressure.
female connector fits any standard 3/8-inch male SAE fitting.
Quick Connect x Regulator with Acme Nut. 12-feet long.

Check Stock

Hotop NPT 3/8 Inch Stainless Steel Male and Female Quick Connector Kit Pressure Washer Adapter Set and 2 Packs NPT 3/8 Inch Stainless Steel Quick Connector Plug Male Nipples

Fine workmanship: these quick pressure washers and pressure washers nipples are made with accurate process, and don’t leak and fade easily.
NPT-compliant: these adapter sets and quick connector plug nipples are all NPT-compliant, please check the specifications before connect them, you can connect to most NPT-compliant connectors.
Size: stainless quick connector kit and pressure washers coupler nipples are 3/8 inch, pay attention to connect to the 3/8 inch size connector before connecting.
Strong pressure resistance: these quick connector kit and stainless steel connect nipples withstands pressure is up to 5000-6000 PSI.
Easy to connect: you can assemble these pressure washers and quick connector plug nipples easily, these adapter sets and nipples make a quick connection for hose, water pump, ball valve, telescoping wand, surface cleaner and so on.

Check Stock

Buachois 2 Sets 50A 6AWG 600V Battery Connector Plug Lightweight Quick Connect Disconnect Wire Harness Plug Kit Towing Winch Quick Connect Systems(Black)

Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
Size information: voltage: 12-36 volts DC.
package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
Convenient installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
Stable working environment: there are 12 pieces terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.

Check Stock

TOPA SPORT Paintball Airsoft Fill Whip Hose Extension 4500psi PCP Air Fill Station & Charging System Stainless Steel High Pressure Air Tool Fittings with Universal Quick-Disconnect Plug Adapter (36\)

【4500 PSI】Works with compressed air tanks up to 3000psi-4500psi rated assembly. It is not designed to work with CO2 Tanks..
【BUILT TO LAST】This refill hose is made from high-quality stainless steel to guarantee durability. Suitable for most hand pumps, high quality replacement to stock air pump hoses..
【FAST & EASY】Refill your tank easily! The fill whip extends the line from your tank to the re-fill station so you can re-fill without having to remove the tank from your pack..
【EASY TO INSTALL】The hose extension comes with a 8mm quick-disconnect male connector on the one end, and 8mm quick-disconnect female connector on the other end. It could be attached and detached within seconds..
【WIDE RANGE of APPLICATION】The external hose length is 36 inches and can be applied to filling stations or compressed air such as paintball / PCP / hand pump and air compressor etc. up to 4500 PSI..

Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

Check Stock

Golden Technologies Maxicomfort ZKAD-5 Autodrive Lift Chair Hand Control Remote

Note: This hand control is serial number specific. Pride says that this is their Generation 3 hand control, and it is only compatible with Pride lift chairs with a serial number of Lxx01404 and after..
Standard quick release hand control raises the chair to the standing position and lowers it back into the recline positions.
Complete assembly that includes the hand "paddle" as well as the cord with the 5-pin connector, as well as the necessary hardware.

Check Stock

Harper 20201044 24 in. Indoor/Outdoor Dry All-Purpose Push Broom with Dual Bristles, for Dust, Gravel, Debris

LONG HANDLE BROOM WITH COMFORT GRIP: 24 in. Push Broom features 24 in. hardwood brush head and 60 in. durable multi-material handle with oversized comfort grip.
DUAL BRISTLES: Dual synthetic bristles for maximum cleaning power and controlling dust.
Stiff interior bristles to dislodge dirt and debris.
Fine, split-tip outer bristles for small debris.
INDOOR/OUTDOOR DRY SURFACES: Ideal for indoor/outdoor use on dry surfaces like driveways, garages and clean-up on concrete or wood.
HEAVY DUTY: Heavy-duty, lightweight design with durable, lacquered hardwood block.
DURABLE DESIGN: Durable steel brace with bolt-on connector ensures a strong, firm connection between handle and brush head.
ONE-TIME EASY ASSEMBLY: All hardware included for easy & quick one-time assembly.

Check Stock

Honeywell Q313A1170 Replacement Thermopile Generator, 750MV, 35inch Lead with PG9 Adapter

Contains multiple thermocouples connected in series to increase the millivoltage output..
Push-in clip, split nut, and adapter assembly for easy pilot burner installation..
Spade or quick-connect terminals available for millivolt gas control connections..
Male nut connector for Pilotstat safety control power units..

Check Stock

10 Foot - Canare 4S11 – Audiophile Grade - HiFi Star-Quad Bi-Wire Speaker Cable Pair with Eminence Gold Banana Connectors

This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 3082 wire and Eminence Gold Banana Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
The brand of connector we used for this custom cable assembly: Eminence 24k, 3 micron Dual Gold Plated 4mm (standard diameter) Audiophile-Grade Banana Connectors custom made for superior abrasion & corrosion resistance. Each connector weighs 10g with a fully insulated body to prevent accidental shorting..
All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integr....

Check Stock