ReviewsQuick Coupling C

1/8 NPT Female Brass Bulkhead Fitting Bulkhead Coupling,1.5 Length Tank Fitting

  • 1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check Stock

Tefen Nylon 66 Hose Fitting Coupling Gray 3/4 Hose ID Pack of 10

  • Coupling for connecting two hoses in a straight run.
  • Nylon 6/6 for lightweight, strength, and resistance to corrosion from most chemicals and solvents.
  • Maximum operating pressure of 200 psi (14 bar) at 68 degrees F (20 degrees C) in a temperature range of -5 to +230 degrees F (-20 to +110 degrees C), subject to application.
Check Stock

The Man with the Movie Camera

  • 35mm SLR (Single-Lens-Reflex) camera with electronically controlled AE (Automatic Exposure) and focal plane shutter..
  • Canon FD series interchangeable lenses with full aperture metering and AE coupling. Canon FL series with stopped-down metering..
  • Standard lenses for the Canon AE are Canon FD 55mm f/1.2 S.S.C, Canon FD 50mm f/1.4 S.S.C, Canon FD 50mm f/1.8 S.C..
  • Canon Breech-Lock mount, Canon FD, FL and R lenses can be used. The viewfinder is fixed eye-level pentaprism with a field of view that is 93.5% vertical and 96% horizontal coverage of the actual picture.
  • Viewfinder information includes aperture scale with meter needle and stopped-down metering which also serves as a battery charge level check mark..
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...irectly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
  • [GOOD SERVICE]: Our aim is to provide durable hose. Any questions, please feel free to contact us, I will provide solutions within 24 hour..
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...ectly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type F is connected to the pump, just slide type F male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
  • [GOOD SERVICE]: Our aim is to provide durable hose. Any questions, please feel free to contact us, I will provide solutions within 24 hour..
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock

Vintage Camera 35mm film for photographer T-Shirt

  • 35mm SLR (Single-Lens-Reflex) camera with electronically controlled AE (Automatic Exposure) and focal plane shutter..
  • Canon FD series interchangeable lenses with full aperture metering and AE coupling. Canon FL series with stopped-down metering..
  • Standard lenses for the Canon AE are Canon FD 55mm f/1.2 S.S.C, Canon FD 50mm f/1.4 S.S.C, Canon FD 50mm f/1.8 S.C..
  • Canon Breech-Lock mount, Canon FD, FL and R lenses can be used. The viewfinder is fixed eye-level pentaprism with a field of view that is 93.5%....
  • Viewfinder information includes aperture scale with meter needle and stopped-down metering which also serves as a battery charge level check mark..
Check Stock

Canon AE-1 35mm Film Camera w/ 50mm 1 1.8 Lens

  • 35mm SLR (Single-Lens-Reflex) camera with electronically controlled AE (Automatic Exposure) and focal plane shutter..
  • Canon FD series interchangeable lenses with full aperture metering and AE coupling. Canon FL series with stopped-down metering..
  • Standard lenses for the Canon AE are Canon FD 55mm f/1.2 S.S.C, Canon FD 50mm f/1.4 S.S.C, Canon FD 50mm f/1.8 S.C..
  • Canon Breech-Lock mount, Canon FD, FL and R lenses can be used. The viewfinder is fixed eye-level pentaprism with a field of view that is 93.5% vertical and 96% horizontal coverage of the actual picture.
  • Viewfinder information includes aperture scale with meter needle and stopped-down metering which also serves as a battery charge level check mark..
Check Stock

Nikon FM2 SLR manual focus film camera with titanium shutter

  • 35mm SLR (Single-Lens-Reflex) camera with electronically controlled AE (Automatic Exposure) and focal plane shutter..
  • Canon FD series interchangeable lenses with full aperture metering and AE coupling. Canon FL series with stopped-down metering..
  • Standard lenses for the Canon AE are Canon FD 55mm f/1.2 S.S.C, Canon FD 50mm f/1.4 S.S.C, Canon FD 50mm f/1.8 S.C..
  • Canon Breech-Lock mount, Canon FD, FL and R lenses can be used. The viewfinder is fixed eye-level pentaprism with a field of view that is 93.5% vertical and 96% horizontal coverage of the actual picture.
  • Viewfinder information includes aperture scale with meter needle and stopped-down metering which also serves as a battery charge level check mark..
Check Stock

35 Mm Still Camera with Electronic Shutter Click with Manual Film Wind

  • 35mm SLR (Single-Lens-Reflex) camera with electronically controlled AE (Automatic Exposure) and focal plane shutter..
  • Canon FD series interchangeable lenses with full aperture metering and AE coupling. Canon FL series with stopped-down metering..
  • Standard lenses for the Canon AE are Canon FD 55mm f/1.2 S.S.C, Canon FD 50mm f/1.4 S.S.C, Canon FD 50mm f/1.8 S.C..
  • Canon Breech-Lock mount, Canon FD, FL and R lenses can be used. The viewfinder is fixed eye-level pentaprism with a field of view that is 93.5% vertical and 96% horizontal coverage of the actual picture.
  • Viewfinder information includes aperture scale with meter needle and stopped-down metering which also serves as a battery charge level check mark..
Check Stock

Huco 321.07.1414.Z Size 07 Flex-Ni Bellows Coupling, Electroplated Nickel With Aluminum Hubs, Inch, 0.118\ Bore A, 0.118\ Bore B, 0.28\ OD, 0.55\ Length, 362.85 in-lbs Max Torque

  • Bellows coupling for use in instrumentation, medical equipment, sensitive high precision drives, and other high precision positioning applications requiring high torsional stiffness and torsional integrity.
  • Aluminum alloy hubs with clear anodized finish for corrosion resistance.
  • Nickel-electroplated bellows for corrosion resistance.
  • Single piece coupling for increased service life over couplings with moving parts.
  • Operating temperatures range from -58 to 248 degrees F (-50 to 120 degrees C).
Check Stock