ReviewsQuick Grip Mini Bar Clamps

Carex Bathtub Rail and Grab Bars for Bathtubs and Showers - Bathtub Grab Bar Shower Handle & Bath Tub Bar Clamps for Seniors & Elderly Chrome

  • GRAB BARS FOR BATHROOM. Increase your independence getting in and out of the bathtub and shower with this bath rail. The textured gripping area with textured finish allows for a safe entrance or exit from the bath with solid support and grip.
  • ATTRACTIVE FINISH: The Carex Bathtub Rail has an attractive chrome finish that is rust and the handicap grab bars match most bathroom décors. The safety bar clamps tightly to the side of the tub for safe entrance to the tub.
  • EASY MOUNTING: The adjustable steel spring clamps make installing this bathtub safety grab bar easy & quick. The clamp fits most size tubs, so it can be easily installed in just about any bathtub with a flat top tub wall.
  • TOOL FREE INSTALLATION. No tools are required for this install. The hand rails secure safely to the tub with clamps lined with rubber grips. Weight capacity - 250 lbs.
  • Carex grab bars for bathtubs and showers. Rest easy knowing that Carex is a leader in bathroom safety bars.
Check Stock

Solid Brass Miniature Bar Clamps 3-3/4 Inches Long Set of 2

  • Set of two ultra mini brass bar clamps with knurled tightening screws.
  • Solid Brass Miniature Bar Clamps, 3 - 3/4 Inches Long (Set of 2).
Check Stock

On-Stage MSA9508 Posi-Lok Sidemount Microphone Boom

  • This 7" mini boom clamps to any mic stand and is ideal for miking applications calling for a fixed position in a limited amount of space.
  • Comes complete with two 52-teeth disks that rotate 300° and grip securely together.
  • Our versatile Posi-Lok design enables virtually limitless mic angles and securely locks in place.
  • Ideal for fixed-position miking where space is limited.
  • Posi-Lok adds versatility to standard 5/8"-27 mic applications enabling a wide array of miking angles.
  • Round ergonomic tightening knob facilitates quick and easy angle adjustments.
  • Clamps to any round shaft with a nylon-tipped tightening screw that won't damage the shaft's finish.
Check Stock

WORKPRO Mini Bar Clamps for Woodworking, 6\(2) and 4-1/2\(2), 4-Piece One-Handed Clamp/Spreader, Light-Duty Quick-Change F Clamp with 150lbs Load Limit

  • 4-1/2” & 6” Clamps Set: The set contains 2 pieces 4-1/2” bar clamps and 2 pieces 6” bar clamps. The 4-1/2" clamps can be set to spreaders of size up to 7-7/8” and 6” clamp is also a spreader with size up to 11-1/4”.
  • Clamp & Spreader: The unique quick-change button design allows the f clamp to be a spreader as well. Just press the red button to take the jaw off and then reverse it before putting it back in, you will get the spreader you need.
  • Powerful Clamping Force: With up to 150 lbs of squeezing force and a metal ratcheting mechanism, WORKPRO bar clamp offers a decent choice for woodworking or other household repairs. It is lightweight, yet sturdy, and is capable of holding pressure for extended periods.
  • Solid Construction: Reinforced nylon body and high-quality hardened steel bars provide great impact resistance, which is totally able to withstand the heavy use expected on construction sites.
  • Eye for Details: Non-marring removable and replaceable pads feature flexible material and non-slip texture, which enhances the overall clamping force. Quick-release latch allows you to adjust and lock the wood clamps simply and quickly. Somewhat surprising, the ergonomically-designed handle and dipping plastic on the quick-release latch are both for....
Check Stock

POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK

  • Includes: (two) piece 24-inch parallel jaw Clamp set.
  • Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier.
  • Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool.
  • 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement.
  • Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool.
Check Stock

Carex Dual Level Bathtub Rail with Chrome Finish - Bathtub Grab Bar Safety Bar For Seniors and Handicap - For Assistance Getting In and Out of Tub Easy to Install on Most Tubs

  • GRAB BARS FOR BATHROOM. Increase your independence getting in and out of the bathtub and shower with this bath rail. The dual textured gripping areas with textured finishes allows for a safe entrance or exit from the bath with solid support and grip..
  • ATTRACTIVE FINISH: The Carex Dual Level Bathtub Rail has an attractive chrome finish and the handicap grab bars match most bathroom décors. The safety bar clamps tightly to the side of the tub for safe entrance to the tub..
  • EASY MOUNTING: The adjustable steel spring clamps make installing this bathtub safety grab bar easy & quick. The clamp fits most size tubs, so it can be easily installed in just about any bathtub with a flat top tub wall..
  • TOOL FREE INSTALLATION. No tools are required for this install. The hand rails secure safely to the tub with clamps lined with rubber grips. Weight capacity - 250 lbs.
  • Rest easy knowing that Carex is a leader in bathroom safety bars..
Check Stock

Hididi Olympic Barbell Clamps Weight bar Plates Quick Release Weight Collars Clips for 2-inch pro lockdow Workout Weightlifting Fitness Training Safety pad Grips Dumbbell bar Gym

  • ...e gyms and professional gym owners.Tested by’ thousands times to make sure the maximum grip strength and Professional level..
  • 【Locking or fixing olympic Barbell Weight and Plate,KEEP SAFE] barbell collars(sold in pair) Designed to lock the barbell plate or weight.Keep safe for the trainer or people stand by. Our clamps are Perfect for workouts,Olympic lifts,overhead press,deadlifts,bench press, or any other workout like strong lifts, powerlifting, weight lifting using 2 inches Olympic Barbell..
  • 【Made of hardened nylon resin frames and injection-molded pressure pads】Exceptional durability .The durable cast body and high-pressure grip pads make our barbell collars clamps virtually indestructible! The Nylon, Engineering plastic.It will be more durable and harder as time goes on.More using casting and high-pressure processing.You could use them years after years.
  • 【Install Or Removal within seconds】 Fast locking and quick release action benefit from Snap-Latch design.Our 2 inch dumbbell collars are very easy to use with One-hand installation and removal, it’s very convenience and safe to change the different barbell or dumbbell weights or plates. Even use your tired hand..
  • 【Won’t damage your plates or bars】Weight clips have smooth nylon co....
Check Stock

Housolution Right Angle Clamp [2 PACK] Single Handle 90°Aluminum Alloy Corner Clamp with 6inch Bar Clamps Right Angle Clip Clamp Tool Woodworking Welding Photo Frame Vise Holder - Silver Gray

  • 【Premium Quality】: Durable right angle clamp, made of premium aluminum alloy die-casting material, ensures abrasion-resistant and lasts loger.....
  • 【Clamping Range】: Maximum clamping range is approx. 2.68in/68mm.
  • jaw depth: 1.4in/35mm, can clamp materials like wood,....
  • 【6inch Bar Clamps Included】: Comes with 2pcs extra quick grip bar clamp, suitable size for comfortable grip and convenient use.
  • 【Adjustable Swing Jaw Design】: The single-handle jaw of this 90°right angle clamp can be rotated in two-way, which allows two different size of....
  • 【Ergonomic TPR Coated Handle】: Rubberized single handle offer comfortable grip and prevents slip. Solid and anti-skid, helps to set up instantly....
Check Stock

10 Pack Hold Down Toggle Clamps Woodworking,201B Clamps Hand Tool Toggle Clamp 220Lbs Holding Capacity,Antislip Quick Release Horizontal Toggle Clamp,Heavy Duty Toggle Clamp for Cam Over Clamp-SKYCY

  • Quick Release Clamp:Cam clamp quick release toggle clamps for holdfast woodworking.Cam lever hold down clamp for cnc workholding clamps.Vertical clamp with non-slip oil and stain-resistant red vinyl solid handle is easy for woodworking clamps hand tool..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material: Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Size Spesifics : 5.90 * 3.74 * 1.41 inches. screw: M6 * 45..
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

Jorgensen 6 Spreader/Bar Clamp Set 4-pack,One-Hand Light Duty E-Z Hold Clamp/Spreader 99216A

  • Basic Parameter - Throat Depth : 2-3/8” from bar top of pad.
  • Normal load limit: 150 lbs. Bar: 1/8”*1/2” plated, round-edge, high-carbon steel.
  • Light-duty E-Z hold design - the E-Z hold design allows clamp to be used in two ways - clamp or spreader. Not only can these versatile Clamps can be easily converted into a spreader Clamps, feature our exclusive patented feature that allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single Clamp.
  • One-handed Clamp - as a standard, quick-acting Clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides Comfort and ease of the use, permits greater travel per squeeze.
  • Features - these bar clamps combine the speed and ease of single-handed use. With 2-3/8 inch reach and furnished with soft and durable plastic pads.
Check Stock