ReviewsQuick Positioning Wrench

TAGVIT 15 PCS Open End Interchangeable Torque Wrench Set, 9mm x 12mm Interchangeable Head Torque Wrench for Bicycle, Air Conditioning Maintenance, etc.(4-22 ft.-lb/5.4-30 Nm)

  • 【± 3% High Precision】The accuracy of the 9mm x 12mm open end interchangeable torque wrench is ±3%, and the adjustable torque range is 4-22ft.-lb/5.4-30Nm. The interchangeable torque wrench adopts dual scale design to meet your different needs. The scale is clear and easy to read, not easy wear..
  • 【Two Ways To Use】The square interface of the open end interchangeable torque wrench measures 9mm x 12mm, and can be used with a 1/4" ratchet head and Interchangeable open end adapters. The two use methods can be freely selected according to your needs..
  • 【Reversible Ratchet Head】The 1/4 inch ratchet head included with the interchangeable torque wrench has a quick release button for quick installation and removal of the socket. By adjusting the paddle on the head of the ratchet head you can switch the direction of clockwise and counterclockwise use, which is convenient and quick..
  • 【Easy To Use】The interchangeable head torque wrench has a safety lock ring. After pulling down the lock ring, turn it to set the required torque. After the setting is completed, release the lock ring, and the lock ring will automatically rebound to lock the torque value. When the set torque value is reached, the torque wrench will send click and vibration to remind to s....
Check Stock

Kobalt 7-Piece Ratcheting Wrench Set

  • 12-point design allows work on multiple fasteners including 6-point, 12-point, square, star and some rounded.
  • 12-point design allows flexibility and versatility in wrench positioning.
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

35MM Stainless Steel Cup Style Hinge Jig Boring Hole Drill Guide Bit Wood Cutter Woodworking DIY Tools for Kitchen Cabinet Door Hinges Inset

  • The set includes: hinge punch locator body, 35mm hole opener (with limit ring) * 1, spanner * 2, 2mm drill bit * 1, hexagon wrench * 1.
  • Purpose: 35mm hinge opening installation, door hinge punching positioning, woodworking hole opening auxiliary tool.
  • Easy to use: Install a 35mm hole opener, adjust the drilling depth to 12-13MM normally, and then lock the limit ring..
  • Durable: Made of aluminum alloy, precision manufacturing, accurate positioning, convenient operation. It has a long service life..
  • The drill guide is adjustable to tension wooden boards of different thicknesses. It is a great tool kit for furniture factory and woodworking fans..
Check Stock

Aluminum Alloy Door Hinge Jig ，Door Hinge Hole Woodworking Hole Opener Slotting Locator ，Hinges for Wood Cabinet Kitchen Door Lock Installation

  • Hinge Jig: Size: 34*20CM, the door lock jig can be opened with a maximum size of 18CM, and a maximum clamp of 6CM. It is easy to adjust and use with its own scale,use door hinge jig for router..
  • Positioning Adjustment: flexible adjustment in four directions, precise positioning, slotted guide plate of the lock body, under the aluminum positioning pressure plate and precise scale, the slot can be slotted according to the hinge you need to install..
  • Note: The hinge jig needs to be used with a trimmer. After grooving, all the corners are rounded. It needs to be trimmed to a right angle and then installed (with a trimmer). Only shallow grooves can be opened..
Check Stock

CRAFTSMAN Torque Wrench, SAE, 3/8-Inch Drive (CMMT99433)

  • PORTABILITY: 3/8 torque wrench has a durable case for portability or storage.
  • ADDED COMFORT: Bi-material handle for comfort and grip of the torque wrench 3/8 inch drive.
  • HASSLE FREE USE: Locking feature of the torque wrench adjusts quick and easily for hassle free use.
  • QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque setting.
Check Stock

Superb Wrench HW-SL-MW4 Replacement Filter Housing Wrench, Silver/Blue

  • SOLID CONSTRUCTION – Made out of 7-gauge galvanized steel, this heavy-duty zinc-plated metal filter wrench will not bend, bow or break when changing/removing stuck housings..
  • ENHANCED CONTROL – This house water filter wrench features an easy-to-hold rubberized handle that is longer than standard plastic filter wrenches, ing more leverage and superior grip..
  • QUICK AND EASY REPLACEMENT – This water filter wrench allows for quick and easy replacement by helping to lose even the most stuck or jammed filtration system housings..
  • EASY TO USE – The metal filter wrench features a directional arrow label with word “loosen” imprinted to ensure turning the filter housing unit in the right direction for removal/change..
  • COMPATIBLE WITH – This 3. 58” dia. water filter cartridge wrench fits most Pentek SW-1 # 150539 SW1 Slim Line, Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner, SW-1 water filter housing, and other slim line housings..
Check Stock

TAGVIT Digital Torque Wrench(7.38-147.5 ft-lbs./10-200 Nm), 1/2-Inch Drive Digital Torque Wrench Electronic Torque Wrench with Buzzer and LED Flash Notification for Bike Motorcycle Car Maintenance

  • High Precision: The torque range of the digital torque wrench is 7.38-147.5 ft-lbs./10-200Nm, with four different torque units: Nm, Ft-lb, in.lb, Kgf.cm, which can be quickly switched according to needs. Accuracy is ±2% clockwise and ±3% counterclockwise, in accordance with ISO 6789 and ASME B107.14M, with an official calibration certificate. Use a professionally manufactured 72-tooth ratchet head for greater precision in use and no slippage..
  • TRACK/PEAK Mode: The 1/2 inch drive digital torque wrench has two measurement modes, the TRACK mode can display the real-time torque value, and the PEAK mode can display the maximum torque value during use. The motorcycle torque wrench adopts a large LCD display, which is clear and easy to read. The highly backlit screen makes it easy to use even in dimly lit environments..
  • 10 Preset Modes: By adjusting the M0-M9 mode of the bicycle digital torque wrench , multiple sets of commonly used torque values and upper and lower limit alarm ranges of torque values can be preset (M0 Mode: preset torque value.
  • M1-M9 Mode: preset torque value Upper and lower limits). Ideal for beginners and professionals, it is widely used in bicycles, motorcycles, auto repair and industrial use, etc..
  • Quick Release Button: The quick releas....
Check Stock

Upgraded Tile Leveling System Kit Reusable Tile Leveler Spacers with Replaceable Steel Needle Flat Ceramic Tile Adjusters Floor Wall Construction Tools

  • ...aying tiles. Very useful and reusable floor tile leveler tools..
  • 【Application Size】Suitable for Tile: Tile gap: 2mm-6mm.
  • Tile thickness: 3mm-16 mm. Ergonomic, easy to use and easy to carry. Made of high quality plastic and stainless steel, very durable Tile Leveling System..
  • 【Multi-function Tool】Tile leveling positioning system leveler can improve tile installation speed and reduce installer fatigue/stress. Virtually slippage free, flat surface drastically. Prevent tiles from moving while curing. Save you a lot of money. Great for both floor leveling and wall leveling..
Check Stock

Adjustable Wrench Heat Treated Adjustable Ratchet Wrench for 6-22mm Screw Anti-Rust Universal Adjustable Socket Wrench Ratcheting Wrench Set with Non-slip Handle Small Large Spanner Wrenches Hand Tool

  • 【Fast and Efficient Ratchet Wrench】The reverse gear function of the adjustable wrench allows you to tighten or loosen fasteners by lightly pressing the switch, and the 60 teeth on the mechanism provide smooth and fast operation. The adjustable wrench is used for 6-22mm (metric) 1/4"-7/8"(imperial) screws..
  • 【Large Torque and Good Performance】Universal wrench quick release mechanism and quick stripping function.
  • handle for additional control and power, delicate knob and direction adjustment paddle. The size of the ratchet wrenches can be easily adjusted according to your needs..
  • 【Anti-Rust and Anti-Corrosion】The ratchet wrench tool is mainly made of high-quality chromium vanadium steel materials, and some parts are made of chromium molybdenum steel materials. The adjustable wrench is more durable and makes your job easier..
  • 【User-friendly Design & Non-Slip】The red and black non-slip handle of the universal socket wrench is ergonomic and comfortable to hold. The reliable sleeve hanging design prevents the socket head from falling into the maintenance space..
Check Stock

CRAFTSMAN Digital Torque Wrench, SAE, 1/2-Inch (CMMT99436)

  • QUICK IDENTIFICATION: Torque wrench 1/2 inch drive has a durable clear case for quick tool identification.
  • FAST TORQURE CHANGES: CRAFTSMAN 1/2 torque wrench converts torque from ft./lb. to in/lb. to Nm at the touch of a button.
  • EASY READOUT: An LED backlit screen of the CRAFTSMAN torque wrench makes it easy to see every readout.
  • CONVENIENCE: Click style is perfect for small engine repairs four-wheelers motorcycles brakes engines and more.
  • ADDED COMFORT: Comfortable handle with ergonomic styling and provides a sure grip.
Check Stock