ReviewsQuick Release Battery Terminal

SUNMORN Battery Terminals, 4 Pieces Battery Cable Ends, 4 Pieces Heat Shrink, Battery Terminal Cover, Battery Terminal Connectors, Marine Battery Terminals Heavy Duty (Kit)

  • Battery Terminal Connectors: clearly labeled positive and negative, Widely Used for Car Marine Boat RV Truck Camper Vehicles Battery Banks etc. Suitable for most types of batteries..
  • Excellent Service: Package Include 2 x Quick Disconnect Quick Release Car Marine Military Top Post Multiple Battery Terminals Connectors, 2 x Adjustable Shims, 2 x Protective cover. If you are not 100% satisfied with your order, we will refund you, no questions asked! !.
  • Very Easy to Install: 0/2/4/6/8 AWG Inputs. Gold Screws Terminals Hold Cables Securely in Place. Easy to replace, fast installation, good conductivity..
  • Material Durable: Automotive Replacement Battery Terminals Ends, Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Good Workmanship..
  • The Cleaning Brush can help clean dirt, debris and corrosion. Allen wrench easy to tighten the wires, Washers prevent corrosion..
Check Stock

micrl 2/0 AWG 350A Battery Quick Connect/Disconnect, Jumper Cable Plug Connector Kit for Recovery Winch, Towing Systems(Gray)

  • Suitable for: Gauge battery quick connectors provide a simple way to connect or disconnect winches trailers or for any other requiring high current, quick disconnect connectors..
  • Durable: The battery quick connect plug is made of sturdy PC fireproof material, equipped with a rubber boot cover to prevent dust, durable and reliable, not easy to break, and long service life..
  • Easy installation: Just insert the wire into the terminal pin, then solder or press, the connector ends are the same, so either end is suitable for connecting the power supply or the load side.
  • Stability function: There are 30 terminal pins made of red copper in the package, which are covered with silver and have strong conductivity, which can reduce resistance and ensure voltage and current stability.
  • You will receive: 15 sets of 12-36v battery quick connectors are included in the package, including 15 connectors, 30 terminal blocks and 15 covers..
Check Stock

SmallRig Full Camera Cage for Sony Alpha 7R V / Alpha 7 IV / A7R IV / Alpha 7 S III / Alpha 1 - 3667B

  • ... V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V..
  • Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment.
  • the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428..
  • Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV.
Check Stock

MOTOPOWER MP0609EA 3.1Amp Waterproof Motorcycle Dual USB Kit SAE to USB Adapter Cable with SAE Ring Terminal Cable Harness

  • Universal Capability- Input Voltage: 12-24V.
  • Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc..
  • Easy Operation- Standard SAE quick release connection complying with most brands of SAE cables. 18" Fused SAE Ring Terminal harness is included for easy connection with the battery directly to provide power for the USB charger. Just plug and play..
  • Quick Installation- Multiple Mounting Options - it can be mounted to amost any surface with tape, zip ties or screws ( hardware not included).
  • Multi-level Safety Protection & Waterproof- Safety design against over-current, over-voltage, over-temperature and reverse connection. WATERPROOF - Fully gluded PCBA without any worry of water damage [ IP68 ].
  • Energy-Save- With the upgraded sleep mode, it will not drain any power from the battery if no usb devices in charing. It can be connected with the power for long time without battery drain. Keep the cap on when not in use to prevent dust in..
Check Stock

2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors Kit Positive and Negative Set Red & Black

  • 【Dimension】Size: Appro2.16X1.37X1.77 inch (As the picture show) ..
  • 【Sturdy & Durable】Our quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic..
  • 【Easy to use】Our products——the battery post terminals Connectors Copper Color: Red(+) & Black(-).Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 【Wide application】These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity..
  • 【You will get】2Pcs pure copper battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service..
Check Stock

2Pcs Battery Terminal Connectors, 4 Way Positive Negative Car Battery Terminals Clamp Connector Quick Release Disconnect for SAE/JIS Type A Posts, for Marine Car RV (yellow)

  • Dimension - For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
  • Easy to use -The battery post terminals connectors are easy to identify with positive (red) and negative(black) labeled. Comes with 1 hex key for easy installation. Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 4 Way Battery Terminal -The SAE battery terminals connectors has 4 posts for wire connection. Designed for multiple cable connections, mainly used for SAE / JIS TYPE A rear car battery..
  • Sturdy & Durable - The quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss..
  • Wide Application - Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck, Marine Batteries,etc. Just make sure to connect the correct terminal for the correct polarity. Works great with good electrical conductivity and corrosion resistance..
Check Stock

micrl 4 Pcs 1/0 Gauge 175A Battery Quick Connect/Disconnect with Handle, Jumper Cable Plug Connector for Recovery Winch (Grey)

  • ✅Simple Installation - Fits 6-8 gauge wire.
  • Capacity 50Apm. Just put the wire in terminal (DIA: 0.21 inch), solder or crimp them, then slide them into the back of plug and lock in place.
  • ✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment.
  • ✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current.
  • ✅Wide Application - Our battery quick connector provides a simple and convenient method for connect/disconnect power to a winch, trailer or other electrical device.
  • ✅Safe Contact - These battery connectors ends are constructed with Spring steel, that ensures an excellent impact resistance and vibration resistance for the batteries.
Check Stock

Hi-Gear Battery Quick Connect Disconnect Electrical Plug kit 2-4 Gauge 175 Amps for Recovery Winch or Trailer by Alfa Wheels (1)

  • ✅Simple Installation - Fits 1/0 Awg cable.
  • Capacity 175 Amps. Just put the cable in terminal (DIA: 0.433 inch), solder or crimp them, then slide them into the back of plug and lock in place.
  • ✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment.
  • ✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current.
  • ✅Wide Application - Our battery quick connector provides a simple and convenient method for connect/disconnect power to a winch or other electrical device.
  • ✅Safe Contact - These battery connectors ends are constructed with Spring steel, that ensures an excellent impact resistance and vibration resistance for the batteries.
Check Stock

YSTOOL Terminal Release Kit, Universal Wire Connector Removal Pin Extractor Release Tool 23 PCS Set for American Domestic and Imported Vehicles

  • Terminal release kit provides all the tools necessary for the damage-free releasing work of plug type connectors. Includes 23pcs release tools of various shapes and sizes to help remove terminals from electrical connectors and eliminates damage to wires or terminal blocks. Makes it safer and more efficient..
  • This kit fits for a wide range of models from home and abroad. Suitable for most American, European and Japanese cars and trucks which has electrical terminal and cables. Widely fits Ford, BMW, Mercedes, Opel, Porsche, Audi, Jaguar, etc. Ideal addition to your garage..
  • Tools come packed in a heavy-duty plastic blow-molded carrying case for easy transportation, simple storage, and quick organization.
  • Each handle of pin extractors is identified with numbers for quick reference to the well-illustrated application chart.
  • Constructed of alloy steel, these extractors are designed for maximum strength and longevity. Has rustproof surface and some adjustable pins. Rubber handle applies ergonomics, providing comfortable & non-slip grip, and insulating performance..
  • We supply 1 year warranty, please feel free to purchase. Any quality issue with the product, you are promised to exchange or refund the problematic parts for free. Please contact us to resolve any ....
Check Stock

TuoLauthon 175A 600V Battery Connector AWG 1/0 Quick Connect Battery Modular Power Connectors for Winch Auto Car Trailer Driver Electrical Devices 1-2 Gauge

  • ✅Simple Installation - Fits 2/0 awg Cable.
  • Capacity 350Amps. Just put the cable in terminal (DIA: 0.496 inch), solder or crimp them, then slide them into the back of plug and lock in place.
  • ✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment.
  • ✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current.
  • ✅Wide Application - Our battery quick connector provides a simple and convenient method for connect/disconnect power to a winch, trailer or other electrical device.
  • ✅Safe Contact - These battery connectors ends are constructed with Spring steel, that ensures an excellent impact resistance and vibration resistance for the batteries.
Check Stock

MOTOPOWER MP0609C 3.1Amp Waterproof Motorcycle Dual USB Charger Kit SAE to USB Adapter Cable Phone Tablet GPS Charger

  • ✅【Universal Capability】- Input Voltage: 12-24V.
  • Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc..
  • ✅【Easy Operation】- Standard SAE quick release connection complying with most brands of SAE cables. ***The fused ring terminal harness is not....
  • ✅【Quick Installation】- Multiple Mounting Options - it can be mounted to amost any surface with tape, zip ties or screws ( hardware not included).
  • ✅【Multi-level Safety Protection & Waterproof】- Safety design against over-current, over-voltage, over-temperature and reverse connection.....
  • ✅【Energy-Save】- With the upgraded sleep mode, it will not drain any power from the battery if no usb devices in charing. It can be connected....
Check Stock