ReviewsQuick Release Hose Clamps

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
WINL hose clamps are reliable, strong, reusable and durable..
Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..

Check Stock

Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It's high efficiency, rapid and saving effort..
Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process..
Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on..
Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC)..
What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk....

Check Stock

WINL Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing,1/4 Inch Hose Clamps 1/2 Inch Hose Clamps

Premium Materials: WINL hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
WINL hose clamps are reliable, strong, reusable and durable..
Remarkable Performance: WINL size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
Effortless Installation: WINL hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Wide Applications: WINL stainless stee....

Check Stock

HighFree Oil Change Pump Extractor 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump with Hose for Boat Tubes Truck RV ATV Yellow Yellow

【12V 60W Oil Extractor Pump】Included: 1 x Pump.
【Specification】: Oil Diese extractor pump's Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that....
【Quick and Clean】Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple....
【Note】This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting:....
【Easy to Use】You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the....

Check Stock

NOT DESIGNED FOR SHOP VACUUMS Taytools 114945 5-Piece 2-1/2” Easy Release Spring Clamps Double Loop Dust Collector Hose Clamps NOT DESIGNED FOR SHOP VACS

NOT DESIGNED FOR SHOP VACS Fits standard 2-1/2” dust collection hose only.
Spring steel maintains pressure to hold hose securely in place.
Double-Loop design has tighter grip on hose.
Includes five (5) Easy Release hose clamps.
Squeeze both rubber grip ends to expand and release double wire hose clamp.

Check Stock

STEELSOFT DIY Hose Clamp System Kit, 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Band Clamp Pipe Clamp Screw Clamp Metal Hose Clamp Large Adjustable for Ductwork, Pole Mount, Metal Strapping

...ving when turning the screwdriver! There is no hard pressure to apply!.
All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 201 SS, anti-rust and anti-salt, very suitable for outdoor use and coastal areas. The stainless steel hose clamps can be reusable after you release it again. Last forever! Separated fasteners can be purchased in our Amazon store..

Check Stock

Performance Tool W80659 Universal Hose Clamp Pliers

The special jaw design allows Hose Clamps to be removed at many different angles.
Quick position locking mechanism keeps the hose clamp spread for easy removal.
Access a variety of hard to reach clamps, tank ventilation lines, radiator clamps, cooler lines, and more.
Steel construction with cushion grips. 1-1/4 in. x 3/4 in. head with multi-directional slotted pattern.
Overall length 11-1/4 in. (28.57mm) Capacity: 0 to 2.55 in. (0mm to 65mm).

Check Stock

WMYCONGCONG Oil Quick Change Pump Extractor 12V 60W Fluid Extractor Motor Oil Diesel Transfer Pump for Car Boat Motorbike Quad RV ATV and Other Vehicles

12V 60W Oil diesel extractor pump's perfect for quick and easy oil changes that you can do at home, help your oil-cleaning task, time-saving..
Ideal for motorcycles, cars, quads, truck, boat, forklift, generator, tractor, scooter and other 12v vehicles. But NOT suitable for gasoline/petrol.....
Easy to use, just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps to the car....
Efficient for fast and clean oil changes, It is very suitable for pumping motor oil, diesel and heating oil, and can be used in equipment such as car....
Package Content: 1 x 12V 60W Oil Extractor Pump.

Check Stock

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....

Check Stock

Penn Plax Aquarium Cascade Canister Filter

...nt directional 360 degree rotating valve taps ♦ swimming pool – style hose clamps ♦ quick, easy, push button self-primer ♦ extra-large capacity stackable filter medium containers with lift-up handles ♦ floss pad and coarse sponge included, free with each canister filter ♦ easy lift alignment clamps that release vacuum suction ♦ sturdy tip-proof base.
FILTER MEDIA OPTIONS BY CASCADE AVAILABLE ON AMAZON, SOLD SEPARATELY: see below for details, sold separately is media such as: bio-floss, bio-sponge, bio-rings, filt-a-pack pro-z, and filt-a-pack pro-carb-z..

Check Stock

BATONECO 10Pcs T-Bolt Clamps Turbo Intake Intercooler Hose Clamp Spring Loaded Stainless Steel 83-91mm 3.27 -3.58

♛[High Quality material] T-bolt clamps use heavy duty 304 stainless steel and zinc coated nuts.Offering high tensile strength, durability,corrosion resistance and wear resistance.Enhances the service life of the product..
♛[Details of protecting hose ] T-bolt clamps has widen and thicken rounded band edges to protect soft hose materials from cuts. Self-locking nut can prevent the hose clamp from loosening, realize the leak-proof effect, and maximize its fastening effect. T-bolt clamps can achieve the best effect..
♛[Universal application] Perfect choice for medium and high boost applications. Works great for DIY Turbo, Intercooler, Intake, Turbo Charger Projects.Can be disassembled and installed repeatedly..
♛【Size Details】 10 pcs Spring loaded T-bolt hose clamps set.Clamp Range 83 mm-91 mm or 3.27"-3.58". Please refer to the size picture for more size details before purchase..
♛【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions,Please feel free to contact us. We would work out satisfactory solution to all your problems. 24 hours quick response..

Check Stock