ReviewsQuick disconnect

OUFKAR 6pcs Fuel Line Disconnect Tool Compatible with Ford GM Mazda, Automotive AC Fuel Line Removal Tool Line Removal Tool Kit 5/16-7/8in

  • Function of Fuel Line Disconnect Tool: Master Deluxe AC line disconnect tool Fuel disconnect tool kit offers a wide range of tool sizes to separate oil / fuel lines, quick disconnects on heater lines and AC cooling lines,and it exactly the product needed for fuel filter replacement..
  • The Fuel Line Disconnect Tool is widely used:Compatible for most Ford, G.M, Mazd.a, and other vehicles with automatic transmission lines, strong compatibility.A must have tool if you work on vehicles.This product definitely made removing the gas lines off easier.
  • The Usability and Design of Fuel Line Disconnect Tool: Each refueling tool is color-coded by size for easy identification.
  • six sizes 1/2"-12.7mm (Yellow), 3/4"-19mm (Black), 3/8"-9.5mm (Blue), 5/8"-16mm (Green), 7/8"-22.2mm (Red), 5/16"-8mm (Copper), They are nicely colored so you can see what size they are if you're in a tight spot..
  • Exquisite Workmanship of Fuel Line Disconnect Tool: Each fuel line quick disconnect heater hose disconnect tool is made of hard plastic with high strength and long life, which can prevent rust and corrosion..
  • Easy to Use of Fuel Line Disconnect Tool: Fuel Line Disconnect spring end and unique offset design can enter the narrow or blocked area that is difficult to reach, and quickly sep....
Check Stock

only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc

  • Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
  • Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
  • 12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
  • Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
  • Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
Check Stock

Superfrill - Blackstone 12

  • Fits Blackstone Grill Griddle: Converts 17inch or 22inch Blackstone portable Griddle to allow connection to the low pressure system on your RV, Travel....
  • Must-Have for your RV: No need to use the big propane tanks, just simply attach your grill to your RV's propane system directly with this propane....
  • 12 feet long: nice long length, which is long enough to place your grill where you wanted, keep it outside the RV but also out from the awning.
  • Easy To Use - Easily connected by hands without tools, Simply replace the Blackstone regulator connection with the conversion fitting and connect to....
  • Includes a quick disconnect fitting for Blackstone，and a propane hose with 1/4 inch female quick disconnect x 1/4 inch male quick disconnect..
Check Stock

Dynamic FLK-38 Automotive Replacement Fuel Line Repair Kit 3/8 in (10mm), 23 Pack , Black

  • Save Time and Money with the Dynamic FLK-38 3/8" Nylon or Steel Fuel Line Repair Kit.
  • QTY 2, 3/8" NYLON TO STEEL COMPRESSION UNIOn.
  • QTY 2, 3/8" QUICK DISCONNECT TO STEEL TO NYLON.
Check Stock

Lisle 37300 Fuel and AC Disconnect Pliers

  • Condition:100% Brand New Aftermarket Part.
  • 7-piece Air Conditioner and Fuel Line Quick Disconnect Tool Set includes 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, and 7/8-inch quick disconnect tools..
  • Constructed from high quality ABS plastic that can easily stand up to daily usage and includes a reusable storage tray.
  • Need to disconnect air conditioning line spring lock couplings on cars and pickup trucks..
  • Easy to install, no installation instruction included.
Check Stock

Line Disconnect Tool 10 Pc Set

  • 【Practical Fuel Line Quick Disconnect Tool】Fuel line disconnect tools are made of high-quality hard plastic, Light weight and small size allows you to carry them easily. Longevity that resists rust and corrosion..
  • 【Easy To Use】Each hand tool is engraved with clear dimensions for easy identification. Simple one-handed operation with easy-grasp end and unique offset design. Easily disconnects air conditioning lines and quick connect fuel lines..
  • 【Wide Use】Ideal to work for 7 sizes of lines: 1/4.
Check Stock

Posi-Tap Connector 12-18 Gauge Wire Bulk Pack of 20

  • TAP INTO ANY WIRE WITH EASE – Wirefy self stripping electrical T Tap connectors will tap into any wire without needing to cut, strip or solder. Mid....
  • THICK COPPER CONTACTS – Thicker tinned copper contacts will not bend even when tapping into thicker wires..
  • QUALITY TTAP CONNECTOR HOUSING – Quick splice T Tap connectors will securely lock on the wire. Plastic housing will not open after it has snapped on....
  • PERFECTLY FITTING MALE QUICK DISCONNECTS – Nylon male disconnects have been designed to lock tightly on the T Tap connectors to prevent sliding out..
  • VERSATILE KIT – 60 PCS T-Tap wire connectors + 60 PCS male quick disconnects will last for numerous wiring projects. Marine, automotive, scientific,....
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Womens Epic Wife Since 2009 T-Shirt 10th Wedding Anniversary Gift T-Shirt

  • Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job.
  • Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece.
  • Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it.
  • Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently.
  • Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire.
  • Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out.
Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
  • Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock

Homebrew Pin Lock Disconnect Pin Lock Barb Quick Disconnect with Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect Barb type (3 pcs), Pin Lock Liquid Disconnect Barb type (3 pcs), Worm Clamps 6 pcs.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 3/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock Barb Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock