ReviewsR C Helicopters

Composite Envisions 4x4 Twill Carbon Fiber Veneer Sheet/Panel - 12x12x.023 in (304.8mm x 304.8 x .56mm)

  • HIGH PERFORMANCE - With high strength, corrosion resistance, high tensile strength, surface smoothness, straightness good, stable performance..
  • LIGHTWEIGHT - Lighter than aluminum, yet stronger than steel.It has good electrical conductivity and very good tensile strength.
  • APPLICATION - It is widely used in stunt kites, mechanical equipment, robotics, as well as helicopters and R/C cars..
  • Note: Since the size is measured manually, please allow a little error..
Check Stock

JX Servo CLS6322HV 21kg High Torque Metal Shell Metal Tooth High Pressure Digital Hollow Cup Servo for Drone RC Car RC Boat Robort

  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys.
  • High-precision Taiwan-made aluminium gears with hard anodizing.
  • Operating Speed :6.6v 0.14 sec/60° 7.4v 0.11 sec/60°.
  • Stall Torque :6.6v 27.8 kg.cm 7.4v 35.6 kg.cm.
Check Stock

Miuzei 5 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments.
  • Interface Type: compatible with JR & Futaba interface..
  • No Load Running Speed: 0.09±0.01 sec/60° at 4.8V Rotary Angle: 120°.
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).Dead band width: 7usec.
  • Amplifier type:Analog controller Operating voltage: 4.8V～6.0V.
Check Stock

ALMOCN 8PCS SG90 9G Micro Servo Motor Kit Mini for RC Robot Arm Helicopter Airplane Car Boat Controls Project

  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino project..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum....
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW....
Check Stock

JX Servo PDI-6208MG 8kg 120 Degree 0.07 sec High Speed High Precision Metal Gear Digital Standard Servo Motor for 1/10 RC Drift Car Buggy Crawler Model Plane

  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments.
Check Stock

California JOS10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm,Hand,Walking Helicopter Airplane Car Boat Control, Micro Servos Arduino Project (with 20CM Dupont M-F Cable)

  • ✅SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi.
  • ✅Stall Torque (4.8V): 17.5oz /in (1kg/cm) Dead band width: 7usec.
  • ✅Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°.
  • ✅Amplifier type:Analog controller Operating voltage: 4.8V～6.0V.
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

PP200, HA1000 Hot Surface Ignitor Kit, Desa Heater HSI

  • Fits Heater Model Nos. Reddy Heater: R35D, R35E, R40, R40T, R55A, R55B, R55BT, R60, R70D, R70ET, R70DT, R110B, R110BT, R110C, R110CT, R115, R115C, R115CT, R115T, R155B, R155C, R165A, R165AT, R165CT, R200A, R200AT, R200B, RC40, RC55T, RC70T, RC115CT, RC115T, RC165CT, RC165T, RH125T, RH170T, RH200T, RHD125T, RHD170T, RHD200T, RL125T, RL170T, RH200T, RM60, RM115, RM115C, RM115CT, RM155, RM155C, RM200AT, and RM200BT..
  • Master: B50H, B50J, B55, B55BT, B60, B70D, B70DT, B110B, B110BT, B115, B115CT, B115T, B150J, B150JT, B155CT, B155T, B165A, B165AT, B165CT, B200AT, B200BT, BC40, BC55T, BC70T, BC115CT, BC165CT, BC165T, M125T, M170T, and M200T..
  • Remington: REM35B, REM35C, REM40, REM50C, REM55A, REM55B, REM60, REM110B, REM110BT, REM115, REM115C, REM115T, REM150E, REM155B, REEM155C, REM200AT, REM200BT, RE125T, RE170T, and RE200T AND MANY, MANY MORE.
  • The ignitor element is very brittle. Do not bend or strike ignitor element or it could break..
Check Stock

XHBAN PP200SC Ignitor Heavy Duty for Ignitor HA1000 Ignitor 102548 71-052-0700

  • This is a high quality aftermarket replacement part manufactured by Ministry of Warehouse.
  • Fits Heater Model Nos. Reddy Heater: R35D, R35E, R40, R40T, R55A, R55B, R55BT, R60, R70D, R70ET, R70DT, R110B, R110BT, R110C, R110CT, R115, R115C, R115CT, R115T, R155B, R155C, R165A, R165AT, R165CT, R200A, R200AT, R200B, RC40, RC55T, RC70T, RC115CT, RC115T, RC165CT, RC165T, RH125T, RH170T, RH200T, RHD125T, RHD170T, RHD200T, RL125T, RL170T, RH200T, RM60, RM115, RM115C, RM115CT, RM155, RM155C, RM200AT, and RM200BT..
  • Master: B50H, B50J, B55, B55BT, B60, B70D, B70DT, B110B, B110BT, B115, B115CT, B115T, B150J, B150JT, B155CT, B155T, B165A, B165AT, B165CT, B200AT, B200BT, BC40, BC55T, BC70T, BC115CT, BC165CT, BC165T, M125T, M170T, and M200T..
  • Remington: REM35B, REM35C, REM40, REM50C, REM55A, REM55B, REM60, REM110B, REM110BT, REM115, REM115C, REM115T, REM150E, REM155B, REEM155C, REM200AT, REM200BT, RE125T, RE170T, and RE200T AND MANY, MANY MORE.
  • The ignitor element is very brittle. It is well packed for shipping, but please handle with care when unpacking..
Check Stock

AEDIKO MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG995)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: Micro Servo Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock