ReviewsRadial Arm Saw Blade

Makita LS1040 10\ Compound Miter Saw

Powerful 15 AMP direct drive motor for improved performance.
Miter cuts 0°-45° left and 0°-52° right.
Positive miter stops at 9 settings: 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts).
Features powerful 15 amp motor and dual post compound pivoting arm.
Provides a large capability with cuts 52 degrees right and 47 degrees left with 9 positive stops at 15, 22-1/2, 30, 45 degrees left or right and 0 degrees.
Durably designed with a machined aluminum base, dual aluminum base, dual slide rails and a carbide tip blade.
Saw includes vertical vise, blade, wrench and triangular rule.

Check Stock

Hooyman Extendable Tree Saw Lopper Attachment with Curved Bypass Cutting Blade, Actuation Rope w/ Handle, Pole Saw Attachment, and Carrying Case for Tree/ Limb Trimming, Pruning, Hunting, and Outdoors

DIMENSIONS: 17.3 inches L X 7.3 inches W.
BE PREPARED: With a 2.25 inch curved bypass cutting blade this lopper attachment is ready and able to cut branches up to 1.5 inches in diameter.
DURABLE: Constructed from high carbon SK5 steel this blade is ready for unmatched cutting and a longer cutting life.
EASE OF USE: The scissor blade paired with the actuation rope with a handle creates the perfect combination for limb trimming. This saw also comes with a carrying case that can be attached to the pole saw for easy transport.
VERSATILE: This attachment features a cast aluminum adapter that allows it to slide and lock into the extension arm of a pole saw (not included) for a secure fit.

Check Stock

Oshlun MTM-SD Side Dial Gauge (Set Gauge)

Side Dial Gauge (Set Gauge) with Plastic Storage Case.
Must have for any saw sharpener or saw shop.
Marked in 0.001-Inch increments for accurate measurements.
Used to measure the tangential and radial side clearance of circular saw blades.
Also used to check the tooth set on steel saw blades.

Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use..
Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade..
These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back ....

Check Stock

Metabo HPT Jig Saw, Variable Speed (CJ160V)

Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Includes: CJ160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (x10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter, Sub Base, Carrying Case.
Auto-mode feature runs the tool at half power and ramps up to full power once a load is detected for easier starts, less vibration and more control.
7. 0 amp motor, intense power for the toughest woodworking jobs.
Electronic speed control maintains SPM while cutting.
Stroke length of 1-1/32", Ideal for many woodworking applications.
Tool-less blade changing system for quick and easy blade replacements.
Multi-position switch, to angle blade for beveled cuts.
Included Components: Cj160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (X10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter (321591), Sub Base (339018), Carrying Case (339017).

Check Stock

Magic Saw Set Kit, 9 in 1 Hand Saws Woodworking, Multi Tool Blades Universal Hacksaw Kit, Coping Saws for Woodworking, Cutting Wood, Plastic, Glass, Tile, Metal, Rope, PVC Pipe, Rubber

Work as magic saw set kit, magic hand saw, magic saw kit, the magic saw, magic handsaw set, magic hand saw set, magic saw multipurpose magic saw.
Use as multi purpose magic saw, magic saw blades, magic saw set, magic saw multipurpose, magic saw 6 blade, magic saw multipurpose cutting tool, hand saws woodworking, coping saw blade.
Work for whole saw kit, folding camp saw, saw zaw blade, coping saws for woodworking, panel saw kit, hand saw kit, steel chop saw, mitre saw 12 inch, bow saw blade.
Use for metal cutting saw blade 14, scroll saw wood, folding saw survival, camping bow saw, bow saw blades, straight flush saw, hole saw kit wood, coping saw blades for wood.
Suit for door jamb saw, hacksaw blades for metal, handsaw for metal, hack saw metal, coping saw for wood, hacksaw for metal cutting, metal coping saw blades.

Check Stock

Hooyman Extendable Tree Saw 5 Foot with Lock Back Blade Impulse Hardened Teeth Locking Extension System and Detachable Head Handsaw for Tree Trimming Cutting Pruning Hunting and Outdoors

DIMENSIONS: Extends to 5 feet and collapses to 12 inches, and weighs 2.3 lbs.
BE PREPARED: With a compact design, lock back blade and I-beam aluminum construction, this hand powered pole saw is both durable and easy to maneuver....
DURABLE: Constructed from high carbon SK5 steel combined with impulse hardened 4-edge teeth, MegaBite XP design this blade offers unmatched cutting....
EASE OF USE: The positive locking extension system paired with the ability to collapse the pole makes for ease of use while trimming, sawing by hand....
VERSATILE: This saw features an in-line design that allows the folding saw head to slide and lock into the extension arm when a pole is needed and to....

Check Stock

KingTool 3 in 1 Multi Blade Hand Saw - 12-Inch Solid Frame Hacksaw, 14-Inch Universal Handsaw and 10-Inch Standard Utility Saw

KingTool 3 in 1 hand saw including 12-Inch solid frame hacksaw blade, 14-Inch universal handsaw blade and 10-Inch standard utility saw blade, and a shared handle for cutting a plastic, metal, pipe, particle board, and wood..
The installation is easy and simple, and the saw blade can be installed in 3 seconds at the fastest. Ergonomically designed bi-material handle for comfort and control..
Solid Frame Hacksaw - A 24inch teeth Bi-Metal hack saw blade and a 18 teeth hack saw blade are included in this 3 in 1 saw set. Adjustable flush cuts at 90° and 180° angles.
Universal Handsaw - A 14”/355mm 7TPI/8TPI universal handsaw blade is included in this 3 in 1 hand saw set..
Standard Utility Saw - A 10”/255mm 7TPI/8TPI standard utility saw blade is included in this 3 in 1 hand saw set.Each saw features Tri-Ground teeth to give you fast, efficient cuts.

Check Stock

Mofeez Mobile Base Wheels Kit 400lbs Loading Capacity for Moving Woodworking Equipment, 3in Rubber Wheels Rolling Smoothly with Bushings and Bearings

Weight Capacity--- 400 lbs./181kg. Perfect for mobilizing table saw, Lathe, 6" Jointer, radial arm saw or other heavy tools, thick steel panel and strong weld joints is durable enough to hold up your drum sander with ease..
Non Marring 3” Wheels--- The wheels are a relatively hard rubber that never scuff up a floor. Rolls smoothly with bushings and bearings, let you move tools with ease..
Plywood Thickness Range from 1/2" To 1"--- The plywood base needs to be at least 1/2” thick. If not the bolts will scrape the ground. This kit comes with two sets of screws for different thickness bases. M8-30 machine screws for plywood 1/2”-3/4” thick, M8-40 machine screws for plywood 3/4”-1” thick..
Raise Machine about 3/4”--- The height of the bottom-surface when the orange lever is in the locked/flat position is about 3/4”. It does not lift very high but enough to wheel on concrete..
12-month Warranty --- Make sure there are no missing parts and that there is no shipping damage. Any broken or defective unit will be replaced, just contact us through amazon message system..

Check Stock

Saw Blade Bushing Set Saw Blades Adapter Ring Aperture Conversion Gasket , 1Inch to 20mm, 1inch to 5/8Inch, 7/8Inch to 5/8Inch, 20mm to 5/8Inch, 5/8Inch to 1/2inch, 1.25Inch to 7/8Inch, Pack of 12

In layman's terms, the inner hole of the saw blade is larger. For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..
Main specifications: Outer diameter-inner diameter 5/8Inch to 1/2inch, 0.78Inch to 5/8Inch, 7/8Inch to 5/8Inch, 1inch to 5/8Inch, 1.25Inch to 7/8Inch, 1Inch to 0.78Inch. Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
Usage description: adapters to mount brush cutter blade to echo trimmer. These did the trick to center the blade to the trimmer. Used for adjustment and conversion of alloy saw blades and other mounting holes becoming smaller. It is suitable for saw blade/marble blade inner hole conversion, angle grinder and cutting machine..
12pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers, There are two pieces of each size, Total of 12 pieces.
VIP after-sales service guarantee: fast refund and exchange. Professional delivery facilities and professional delivery personnel will prevent ....

Check Stock

CMT 201.030.12 12\ x 30 Tooth FTG, .126 Kerf, 1\ Bore Table Saw Ripping Blade

For for fast, smooth, heavy-duty rip cuts on soft/hardwood. Good performance on plywood..
To be used on radial arm saws, miter saws, table and special saws..
0.126 kerf thickness, 0.087 plate thickness, 20° hook angle, FTG-Flat Top Grind..
Micrograin carbide teeth to last longer and deliver smooth cuts..
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..

Check Stock