ReviewsRadial Insert

Sealmaster NP-27 Pillow Block Ball Bearing Non-Expansion Type Normal-Duty Regreasable Setscrew Locking Collar Felt Seals Cast Iron Housing 1-11/16 Bore 2-1/8 Base to Center Height 5-3/4 Bolt Hole Spacing Width

Two-bolt housing with ball bearing insert for a ready to mount installation.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
Felt seal to protect against contaminants and retain lubrication.

Check Stock

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

Pressed steel flanged housing for light-duty applications with low to moderate speeds.
Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
Setscrew lock for a three-point contact hold on the shaft.
Extended inner ring for increased shaft support.

Check Stock

Sealmaster NP-16 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1" Bore, 1-7/16" Base to Center Height, 4-1/8" Bolt Hole Spacing Width

Two-bolt housing with ball bearing insert for a ready to mount installation.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
Felt seal to protect against contaminants and retain lubrication.

Check Stock

Sealmaster NP-24 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/2" Bore, 1-15/16" Base to Center Height, 5-3/8" Bolt Hole Spacing Width

Two-bolt housing with ball bearing insert for a ready to mount installation.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
Felt seal to protect against contaminants and retain lubrication.

Check Stock

Cobra Golf 2021 Radspeed Iron Set Satin Chrome-Black-Turbo Yellow (Men's Right Hand, KBS Tour 90, Stiff Flex, 5-GW)

Radial Weighting Technology-Radial Weighting is the strategic placement of weight relative to the CG to optimize speed, forgiveness, and flight direction from the fairway or off the tee,.
Forged PowerShell Face-A forged face insert is made of thin 17-4 stainless steel, and is designed to increase flex in and around the sweet spot for faster ball speed and higher launch.
3D Printed Medallion-Cobra has pioneered the use of 3D printing in golf manufacturing, It offers unlimited complexity in design, allowing us to create an intricate lattice medallion structure that saves weight while fine tuning feel.
Tuned Rad Weighting-A 10g weight positioned low and in the toe area centers the CG and adds stability for more distance, and forgiveness on off-center hits.

Check Stock

Sealmaster NP-20R Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/4" Bore, 1-11/16" Base to Center Height, 4-3/4" Bolt Hole Spacing Width

Two-bolt housing with ball bearing insert for a ready to mount installation.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
Felt seal to protect against contaminants and retain lubrication.

Check Stock

Cobra Golf 2021 Radspeed Iron Set Satin Chrome-Black-Turbo Yellow (Men's Left Hand, KBS Tour 90, Reg Flex, 5-GW), Standard

Radial Weighting Technology-Radial Weighting is the strategic placement of weight relative to the CG to optimize speed, forgiveness, and flight direction from the fairway or off the tee,.
Forged PowerShell Face-A forged face insert is made of thin 17-4 stainless steel, and is designed to increase flex in and around the sweet spot for faster ball speed and higher launch.
3D Printed Medallion-Cobra has pioneered the use of 3D printing in golf manufacturing, It offers unlimited complexity in design, allowing us to create an intricate lattice medallion structure that saves weight while fine tuning feel.
Tuned Rad Weighting-A 10g weight positioned low and in the toe area centers the CG and adds stability for more distance, and forgiveness on off-center hits.

Check Stock

Sealmaster MP-32 Pillow Block Ball Bearing, Non-Expansion Type, Medium-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 2" Bore, 2-1/2" Base to Center Height, 6-3/4" Bolt Hole Spacing Width, ±2 degrees Misalignment Angle

Two-bolt housing with ball bearing insert for a ready to mount installation.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
Felt seal to protect against contaminants and retain lubrication.

Check Stock

Cobra Golf 2021 Radspeed Combo Iron Set Satin Chrome-Black-Turbo Yellow (Men's Right Hand, UST Recoil 460 ESX, Senior Flex, 5-GW)

Radial Weighting Technology-Radial Weighting is the strategic placement of weight relative to the CG to optimize speed, forgiveness, and flight direction from the fairway or off the tee,.
Forged PowerShell Face-A forged face insert is made of thin 17-4 stainless steel, and is designed to increase flex in and around the sweet spot for faster ball speed and higher launch.
3D Printed Medallion-Cobra has pioneered the use of 3D printing in golf manufacturing, It offers unlimited complexity in design, allowing us to create an intricate lattice medallion structure that saves weight while fine tuning feel.
Tuned Rad Weighting-A 10g weight positioned low and in the toe area centers the CG and adds stability for more distance, and forgiveness on off-center hits.

Check Stock

Cobra Golf 2021 RadSpeed One Length Iron Set Satin Chrome-Blue-Red (Men's Left Hand, KBS Tour 80-90-Wedge, Reg Flex, 5-GW), Standard

Radial Weighting Technology-Radial Weighting is the strategic placement of weight relative to the CG to optimize speed, forgiveness, and flight direction from the fairway or off the tee,.
Forged PowerShell Face-A forged face insert is made of thin 17-4 stainless steel, and is designed to increase flex in and around the sweet spot for faster ball speed and higher launch.
3D Printed Medallion-Cobra has pioneered the use of 3D printing in golf manufacturing, It offers unlimited complexity in design, allowing us to create an intricate lattice medallion structure that saves weight while fine tuning feel.
Tuned Rad Weighting-A 10g weight positioned low and in the toe area centers the CG and adds stability for more distance, and forgiveness on off-center hits.

Check Stock

Cobra Golf 2021 RadSpeed One Length Iron Set Satin Chrome-Blue-Red (Men's Right Hand, KBS Tour 80-90-Wedge, Stiff Flex, 5-GW), Standard

Radial Weighting Technology-Radial Weighting is the strategic placement of weight relative to the CG to optimize speed, forgiveness, and flight direction from the fairway or off the tee,.
Forged PowerShell Face-A forged face insert is made of thin 17-4 stainless steel, and is designed to increase flex in and around the sweet spot for faster ball speed and higher launch.
3D Printed Medallion-Cobra has pioneered the use of 3D printing in golf manufacturing, It offers unlimited complexity in design, allowing us to create an intricate lattice medallion structure that saves weight while fine tuning feel.
Tuned Rad Weighting-A 10g weight positioned low and in the toe area centers the CG and adds stability for more distance, and forgiveness on off-center hits.

Check Stock