ReviewsRadial Lead

Lotus Reinforced Heavy Duty Radial Tire Repair Patches (5-1/8'x6-1/8)

  • The lotus ZRP-35 four ply polyester reinforced radial tire repair patches. (10 Pack).
  • For use in prepared radial tire crown injuries up to 1″ (25mm).
  • Tools and vulcanizing chemicals not included..
  • Unique single direction nylon ply and locking wedge construction offers high strength and flexibility for all radial passenger, light truck and all commercial tire repairs..
  • Patch size 5-1/8″ X 6-1/8″. Heavy duty polyester reinforced plies..
Check Stock

Full set WANDA ATV/UTV Tires 25x8-12 Front & 25x10-12 Rear /6PR

  • Includes Four 30x10-14 Tusk Terrabite Radial 8 ply tires..
  • DOT test standard compliant (FMVSS 571.119) at max operating pressure. Radial, 8 Ply Rated Construction. Truck style tread for smooth ride on hard surfaces. Excellent off road performance. High load ratings for today’s larger machines. Tread depth: 3/4 inch. Medium/Hard terrain tire..
  • Please Note: The Terrabite can run slightly small for its size..
  • Construction type: Radial 8-Ply DOT Approved.
Check Stock

NTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance

  • INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

KOKISO NTC Thermistors Resistors MF52 3950K 10 Values 100 PCS Inrush Current Limiter Temperature Sensor Assorted Kit Assortment(1KΩ, 2KΩ, 3KΩ, 4.7KΩ, 5KΩ, 10KΩ, 20KΩ, 47KΩ, 50KΩ,100KΩ)

  • Package Dimensions: 16.4 H x 0.7 L x 8.7 W (centimetres).
Check Stock

Four (4) Tusk TERRABITE Heavy Duty 8 Ply Radial UTV/ATV Tires - 30x10-15

  • Includes Four 30x10-15 Tusk Terrabite Radial 8 ply tires..
  • DOT test standard compliant (FMVSS 571.119) at max operating pressure. Radial, 8 Ply Rated Construction. Truck style tread for smooth ride on hard surfaces. Excellent off road performance. High load ratings for today’s larger machines. Tread depth: 3/4 inch. Medium/Hard terrain tire..
  • Please Note: The Terrabite can run slightly small for its size..
  • Please verify you have 15'' and not 14'' wheels before purchasing..
  • Construction type: Radial 8-Ply DOT Approved.
Check Stock

NSK 6806DD 6806-2RS Made in Japan 30x42X7MM High Speed Bearings Deep Groove Ball Bearings

  • Deep-groove geometry for high speeds and supporting both radial and axial loads.
  • Single-row bearing for supporting radial loads.
  • Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision.
  • Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise.
  • Shields on both sides of the bearing to keep lubricant in and contaminants out.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Eastman 48036 Flexible Faucet Connector Supply Line, Braided Stainless Steel, Delta Style, 3/8-inch Outside Diameter (OD) Male Compression Outlet X 3/8\ Compression Inlet, 16-Inch Length

  • EZ-Fluid Plumbing Stainless Steel Braided Faucet Extension Line, Fits 3/8" Male Comp. End Fittings For Faucet, Toilet, Dishwasher, Water Filter System And More.
  • cUPC, NSF Certified Lead Free faucet supply 3/8 to 3/8 Extension.
  • Faucet 3/8" Female Compression X 3/8" Female Compression Faucet Extension Line.
  • High Burst Strength, Extra-Long Stainless Steel, No-Burst Ferrules With Double Radial Crimps For Extra Security.
  • 3/8 female compression hose x 3/8 female Comp water connector, The 3/8 female Compression End Fits 3/8" Male Comp. End Fittings.
Check Stock

Pendulux, Powerplant Wall Clock, Home Decoration

  • EARLY AIRCRAFT INSPIRED - First developed in 1904 for aircraft use, the radial engine became one of the most reliable means of power for aircraft from the First World War through the 2nd, and is still in use around the world today..
  • GORGEOUS RETRO DESIGN - Because their power to weight ratio was better than most inline engines, radial engines became more popular. Our Powerplant Engine Clock is representative of the type of radial engine found in US Aircraft from the 1920’s through the 1940's..
  • GIFT FOR SPECIAL OCCASIONS - You can give this wall clock as a gift for your friends, loved ones, vintage enthusiasts. Or keep it for yourself to enjoy..
  • PREMIUM QUALITY MATERIAL - Our wall clock is made with premium quality solid cast aluminum material. Durable, sturdy, and won't break easily..
  • ITEM DIMENSIONS - This wall clock measures 14 H x 14 W x 3 D inches, and weighs 7.6 lbs..
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

FAG N309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Outer Ring, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 25mm Width

  • FAG cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock