ReviewsRadial Needle Roller

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

NSK N211W Cylindrical Roller Bearing, Standard Capacity, Removable Outer Ring, Straight, Pressed Steel Cage, Normal Clearance, Metric, 55mm Bore, 100mm OD, 21mm Width, 6300rpm Maximum Rotational Speed, 62500N Static Load Capacity, 58000N Dynamic L...

  • NSK 200 series cylindrical roller bearing with machined brass cage and removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

Koyo B-168 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 1\ ID, 1-1/4\ OD, 1/2\ Width, 4300rpm Maximum Rotational Speed

  • Drawn cup needle roller bearing for applications with high dynamic loads.
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces.
  • Full complement of rollers for higher radial load capacity than caged rollers.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets standard ASTM F2162 for quality assurance.
Check Stock

Koyo BH-1012 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 5/8\ ID, 7/8\ OD, 3/4\ Width, 6200rpm Maximum Rotational Speed

  • Drawn cup needle roller bearing for applications with high dynamic loads.
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces.
  • Full complement of rollers for higher radial load capacity than caged rollers.
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
  • Meets standard ASTM F2162 for quality assurance.
Check Stock

Sliding Patio Door Tandem Roller Assembly,1-1/4 Inch Steel Ball Wheel Bearing 2 Pack

  • 【INCLUDES】 Includes 2 x Sliding Patio Door Roller, used for replacing damaged or missing roller assemblies on sliding patio doors.
  • 【STANDARD SIZE】The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter.
  • 【SOLID CONSTRUCTION】high quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the....
  • 【EASY TO INSTALL】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly.
  • 【GUARANTEE】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us.
Check Stock

Andersen Patio Door Tandem Roller 1997061 (2 Pack)

  • 【Standard Size】Each sliding door tandem roller measures about 5/16-inch in wheel thickness (width) and 1-1/4-inch in diameter, a suitable size for replacing damaged or missing roller assemblies on sliding doors or windows..
  • 【Products Includes】2 × sliding patio door rollers, widely used for replacing damaged or missing roller assemblies on sliding patio doors, enough quantity for using in different doors at one time..
  • 【Solid & Durable Construction】The sliding door roller wheel is made of high quality material, stable and not easy to break, safe and reliable. High quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG..
  • 【Easy to Install】This steel ball bearing roller is widely used to replace damaged or missing tandem roller assemblies in patio sliding glass doors, can be installed fast and effortlessly without extra tools..
  • 【Wide Application】The sliding door roller can be used on wood, extruded aluminum, vinyl patio doors, sliding glass door, screen door, sliding gate, window, vinyl patio doors, closet and more, is an indispensable accessory in daily life..
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

SKF 22207 E/C3 Spherical Roller Bearing

  • Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads.
  • Machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • P5 precision outer ring with center lubrication groove and oil holes.
  • C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

FK Bearings WSSX16T Spherical Bearing with Teflon, 1\ (1-3/8 Wide), 1 Pack

  • Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
  • Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

Heavy Duty Sliding Patio Door Roller Assembly 1-1/4 Inch Steel Ball Wheel Bearing, Side Adjustable,2 Pack

  • ★【Includes】 Includes 2 x Sliding Patio Door Roller,used for replacing damaged or missing roller assemblies on sliding patio doors.
  • ★【Standard Size】 The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter, 5-3/4-inch hole centers. This roller assembly has a minimum collapsed height of 1-1/2 in..
  • ★【Solid Construction】High quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the bearings made from Carbon Steel W/O heat treating, we insists all bearings made from Heat Treated Bearing Steel.
  • ★【Easy to Install】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly.
  • ★【Lifetime Guarantee】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us.
Check Stock