ReviewsRadial Patch

10 Pack RG6 F Type Compression Connector + 10 Pcs Coaxial Cable Extender Connector, CKANDAY F-Type Coaxial Cable Coax Converter Wire Connector Adapter Female to Female for TV Cables, Blue/Silver

  • Material: Made of high-quality brass, cadmium-plated and coated with iridescent chromate coating to maximize corrosion resistance. Easy-to-use, pre-positioned and detachable coupling plastic sleeve..
  • The quadruple sealing system of the RG6 compression connector can prevent moisture from migrating into the connection, and the 360-degree radial compression can provide excellent RF performance and integrity..
  • The plastic sleeve has been pre-positioned and is detachably connected to the connector body.The UV-resistant plastic provides a reliable environmentally-friendly sealed connector..
  • Coax coupler resists corrosion and provides rigidity.RG6 coupler for extending the length of RG6 coaxial cables..
  • Perfect choice for RG6 Patch cables.F-81 barrel connectors are individually packaged for maximum protection.
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

FAG N309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Outer Ring, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 25mm Width

  • FAG cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

SKF NU 2308 ECML Cylindrical Roller Bearing Single Row Removable Inner Ring Straight Bore High Capacity Normal Clearance Brass Cage Metric 40mm Bore 90mm OD 33mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

SKF NU 215 ECM/C3 Cylindrical Roller Bearing, Single Row, Removable Inner Ring, Straight Bore, High Capacity, C3 Clearance, Brass Cage, Metric, 75mm Bore, 130mm OD, 25mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

SKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2\ Bore, 5-1/8\ Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF NJ 409 MAS/C3 Cylindrical Roller Bearing Single Row Removable Inner Ring Flanged Straight Bore Standard Capacity C3 Clearance Brass Cage Metric 45mm Bore 120mm OD 29mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

FAG NUP2309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Two Piece, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 36mm Width

  • FAG cylindrical roller bearing with a removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

Heartland Ranch Amy And Ty T-Shirt

  • Set of 4 ST225/75R15 ST 225 75R15, Max Capacity: 2830 pounds.
  • The Radial ply tire is constructed with double steel belts and double polyester cords for increased durability, and the shoulder design provides better heat dissipation resulting in longer tread life and even wear. Nylon cap ply ( A protective layer of nylon is wrapped around the entire tread area), to help prevent tread separation..
  • This ST 225/75R15 tire uses radial construction, created specifically for boating, cargo, utility, or horse and stock, as well as towable RVs and toy haulers..
  • Wheel NOT included! Refer to your existing tire sidewall and/or trailer owner's manual to determine the appropriate tire size and load capacity for your application..
  • We sent 4 tires with two packages! Please wait if you just receive one, the other is on the way. Warranty: Radial Trailer Tire guaranteed for 1 year! We offer free exchange for any quality problems within the warranty..
Check Stock