ReviewsRadiator Fittings

Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator Soft Tube Water Cooling Kit CL-W253-CU12SW-A

  • Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync.
  • All includded – the C360 soft tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop.
  • Slim copper radiator – the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis.
  • Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo.
Check Stock

The Gilded Shroud (Lady Fan Mystery Book 1)

  • Maximum Cooling Function - This high performance 3 row racing design radiator with fans which can improve engine cooling efficiency by 35-45% temp, making stronger and higher capacity for coolant than stock..
  • Perfect Fit Fitment - This Radiator Fan Shroud Kit is compatible with 1966-1979 Ford F-Series F100 F150 F250 F350 Pickup V8 L6 Engine & 1978-1979 Bronco L6 V8 Engine..
  • Extraordinary Quality - It is constructed of high quality full aluminum construction to ensure an extremely long lasting operate life..
  • Simple Installation - Direct bolt-on OE fitment or replacement for factory unit, fast and simple installation without any drilling or modification..
  • Indispensable Fittings - Includes high-pressure cap and brass drain petcock, also more build-in trans oil cooler which fits automatic or manual models..
Check Stock

Shott Tech RAD240C Copper Water Cooling Radiator, 240mm, Slim Dual, Black

  • Overall Dimensions: 275mm x 121mm x 28mm. Fits 2 standard 120mm fans. Slim profile enables fitting the radiator in tight places and achieves low air flow resistance.
  • 20 FPI Copper Fin design provides maximum thermal conductivity and a high heat transfer surface area for optimum heat flow.
  • High flow, low pressure drop design consists of 14 tubes in a parallel, dual pass flow arrangement, rated for 1 bar (14 psi) of pressure.
  • G1/4” threaded ports for compatibility with most popular fittings.
  • 8 M3 x 30mm screws are provided for mounting standard 120mm x 25mm fans, such as Shott Tech FAN1225. 8 M3 x 5mm screws are provided for mounting the radiator to a computer case or chassis.
Check Stock

Radiator Pressure Tester Vacuum Refill Tool Kit - 28PCS Coolant System Leak Tester and Pneumatic Purge Fill Set with Adapter Refill for Vehicle

  • ...ly fills coolant and eliminates air pockets under vacuum to avoid engine distortion or other damaged.Thermometer to check if coolant temperature is too high.All in 1,more choices!.
  • 【Wide Applications】Cooling system pressure tester is equipped with 17 specific adapters and 1 universal tapered rubber adapter and 3 radiator cap test adapters and 2 connectors, compatible with most of domestic & imported vehicles and works on 99% of the coolant systems.Color code radiator tests caps make it easy to choose the suitable tests cap for the job of messy.A fascinating gift for car lovers and a useful set of tools for families..
  • 【Value for Money】Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosive and wearproof. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe, and normally -25 to -20inHg is right time to add coolant. 24" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing.Stainless steel thermometer with index ranged 32 to 400℉..
  • 【Easy to Operate】--Connect the correct adapter cap to the radiator coolant pressure test manual air pump, pressurize the cooling system, and observe the....
Check Stock

Black Ice Nemesis 360GTS Radiator

  • 120 mm x 3 fan slim form factor two-pass radiator.
  • 398mm x 133mm x 29.6mm (L x W x H) Black Carbon.
  • Now optimized for sub-800 rpm ultra-stealth fans.
Check Stock

Black Ice Nemesis 360GTS Ultra Stealth U-Flow Low Profile Radiator - Primer

  • 120 mm x 3 fan slim form factor two-pass radiator.
Check Stock

Black Ice Nemesis 240GTS Radiator

  • 120 mm x 2 fan slim form factor two-pass radiator.
  • Now optimized for sub-800 rpm ultra-stealth fans.
Check Stock

Primecooling 4 Row All Aluminum Radiator for Chevy/GMC Blazer,C/K Series Pickup Truck More V8 Models 1973-91

  • Perfect Fit Compatibility - This radiator is compatible with 1978-1986 Chevrolet GMC C/K Series 10 20 30 1500 2500 3500 Pickup, 1981-91 Jimmy Blazer & 1983-91 P/R/V Series Vehicles, fits with many L6 V6 V8 models..
  • Extraordinary Quality - It is constructed of high quality full T-6061 aluminum construction to ensure an extremely long lasting operate life..
  • Max Cooling Performance - Come with 4 row radiator which can improve engine cooling efficiency by 35 - 45% temp, making stronger and higher capacity for coolant than stock..
  • Easy To Install - Direct bolt-on OE fitment or replacement for factory unit, fast and simple installation without any drilling or modification..
  • Necessary Fittings - Includes high-pressure cap and brass drain petcock, also more build-in trans oil cooler which fit auto or manual transmission models..
Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

  • ...oolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
  • WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
  • WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hook for hanging on the engine hood..
  • ACCESSORIES: There are 2 styles air plugs in the case for you to choose, European style air plug and a American style on....
Check Stock

Thermaltake Pacific Riptide 360 Pro D5 Res/Pump PETG Hard Tube Water Cooling Starter Kit CL-W121-CA12RE-A

  • Not ready for the deep end just yet? Wade in the shore lines with the Reef 240, which gives you all the basic necessities to get your feet wet and your CPU cool..
  • RADIATOR: High-density fin design (FPI: 14), the 240mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity..
  • W2 CPU WATER BLOCK: The LED CPU water block is constructed with a copper base and LED Backlighting to provide exceptional heat transfer and cooling performance. Fits all modern CPU sockets..
  • PR22-D5 w/ SILENT KIT RESERVOIR PUMP COMBO: The 300ml reservoir and D5 pump to provide the perfect combination for proper water cooling circulation and capacity..
  • A COMPLETE KIT: Including (6) PETG Compression, (2) 90° Adapters and (1) Dual Compression 90° fittings, 2 Packs of 4 x 500mm PETG Hard Tubes.
Check Stock

CMTOOL Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case

  • 【Upgraded Multifunctional Cooling System Pressure Tester Kit】The radiator pressure tester kit includes everything you need to quickly and easily test vehicle radiator system leaks and refill coolant, improve vehicle service life, and keep your vehicle running smoothly. Thanks to its universal rubber adapter, the coolant pressure tester master kit is compatible with almost all domestic and imported vehicles on the market. So whether you are a DIY-er or a professional, this set has you covered..
  • 【Durable Radiator Pressure Tester with Good Airtightness】The radiator pressure tester uses high-quality aluminum pump cylinders instead of ordinary plastic pump cylinders, 21" rubber nylon resin hoses and brass fittings to ensure durability and good airtightness. The coolant leak detection kit can quickly find Whether there is abnormal leakage (About 10 minutes). The accurate shockproof meter (3 inches), the dial uses color code design to make the data clear and easy to read. (0-35psi/0-2.5bar).
  • 【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impuritie....
Check Stock