ReviewsRadiator Pick Set

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

  • MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Coolant system leak checker and filling tool set is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin mater....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

ARES 15044-32-Piece Cooling System Leakage Tester and Vacuum Refill Kit - Easily Test for Leaks in Cooling System - Change Coolant Quickly

  • SET INCLUDES: This Cooling System Leakage Tester and Vacuum Refill Kit includes a cooling system pressure pump with a nylon tube and gauge, a vacuum pump and refill apparatus, a black radiator cap tester, a blue radiator cap tester, a 90-degree pressure pump connector, a thermometer, a radiator test cap wrench, a conical rubber adapter, a coolant hose, a drain hose, and 22 test caps (No. 3 - No. 24) that cover a wide range of vehicles. Please see product manual for full compatibility details..
  • DESIGN CONSIDERATIONS: This set is designed to let you quickly and easily test for leaks in your cooling system. With the blue and black connectors, you can even pressure test your radiator caps. The vacuum pump and refill apparatus makes it simple to connect to your shop air supply, so you can refill coolant faster than time-consuming air-bleeding. The 90-degree connector allows you to work on recovery tanks located deep in the engine compartment..
  • QUALITY YOU NEED: Our Cooling System Leakage Tester and Vacuum Refill Kit makes it easy to test for leaks and refill coolant on nearly any vehicle. With added safety features, like its included thermometer and pressure release valve, you'll be able to work with confidence. Thanks to nylon construction this set is ligh....
Check Stock

cciyu 10"Inch Universal Slim Radiator Cooling Fan Push Pull Electric 12V Mount Kit Fit for Honda Accord Nissan 200SX Toyota Corolla BMW 323Ci 325Ci 330xi

  • FIT VEHICLES – Radiator/Condenser cooling fan for 1992-1993 Acura Integra,1996-1999 Acura TL,2000-2006 BMW X5,1993-1997 Honda Civic del,1997-1999 Hyundai Tiburon,1992-1996 Mitsubishi Diamante,1993-1997 Subaru Impreza,1995-1999 Toyota Avalon.
  • FEATURES – Our engine cooling fan assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our fan assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • EASY INSTALLATION – Step 1: For Electric Radiators, Disconnect Electrical Wiring. Step 2: Remove Radiator Fan Shroud.
  • Step 3:Remove the Old Fan.use your wrench and/or ratchet and socket set to remove the bolts or disassemble the fan clutch and fan assembly.
  • Step 4: Replace Radiator Fan.insert new fan into the space where the old radiator fan was previously installed.
  • Step 5: Reattach Electric Wires and Test..
  • PAKCAGE INCLUDING – We offer 1 piece of high performance radiator cooling fan and buy with confidence..
  • NOTE – Please never mind searching for See all vehicles or look though the description of the item includi....
Check Stock

ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch

  • SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance.
  • Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements.
  • No need to drain systems before servicing.
  • Ratcheting jaws allow for automatic locking to save you even more time.
  • EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off.
  • 3-IN-1 SET: Package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area.
  • VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank.
  • This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel l....
Check Stock

Mostbest 28PCS Universal Radiator Pressure Tester Leak Checker Vacuum Type Cooling System Automotive Radiator Pressure Test Kit Purge and Refill Kit Set w/Carrying Case

  • ❤️Equipped with 17 test caps for testing cooling systems on most domestic and import vehicles, such as VW, BMW, Ford, Opel, Porsche, Audi, etc. Working pressure is from 0 to 35 psi. It will be a good helper in your daily life..
  • ❤️Color coded radiator test caps aid with identifying which cap is needed for each application, so it’s easy for you to choose the suitable test cap for the job without messy..
  • ❤️Special design of vacuum purge and refill tool connection allows easy testing for leakage in radiator system and quick change of coolant. With this pressure tester, you could easily do the job..
  • ❤️Equipped with a bold molded case, which keeps your kit organized, providing you a convenient way to tester. Besides, with the case, you could easily bring this radiator pressure tester set to anywhere you needed..
  • ❤️Comes with various instruments, which help you solve any problem about radiator pressure conveniently and quickly..
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock

Apevia CS-S63231-24 Screw Set T6#32 * 31 for Radiator CPU Liquid Cooler, 24-Pack

  • CS-S63231-24 (Small) Screw set T6#32*31 for Radiator CPU Liquid Coolers (120mm / 240mm / 280mm / 360mm).
  • Screws (Small) can be used for additional / replacement use for Radiator CPU Liquid Coolers.
Check Stock

Radiator Pressure Tester Vacuum Refill Tool Kit - 28PCS Coolant System Leak Tester and Pneumatic Purge Fill Set with Adapter Refill for Vehicle

  • ...ly fills coolant and eliminates air pockets under vacuum to avoid engine distortion or other damaged.Thermometer to check if coolant temperature is too high.All in 1,more choices!.
  • 【Wide Applications】Cooling system pressure tester is equipped with 17 specific adapters and 1 universal tapered rubber adapter and 3 radiator cap test adapters and 2 connectors, compatible with most of domestic & imported vehicles and works on 99% of the coolant systems.Color code radiator tests caps make it easy to choose the suitable tests cap for the job of messy.A fascinating gift for car lovers and a useful set of tools for families..
  • 【Value for Money】Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosive and wearproof. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe, and normally -25 to -20inHg is right time to add coolant. 24" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing.Stainless steel thermometer with index ranged 32 to 400℉..
  • 【Easy to Operate】--Connect the correct adapter cap to the radiator coolant pressure test manual air pump, pressurize the cooling system, and observe the....
Check Stock

Ninja 400 Motorcycle Radiator Grille Guard Cover Fit For Ninja 400 2018-2020

  • 【Fitment】 ✔For Kawasaki Ninja 400 2018-2020.
  • 【Package Included】 ✔Motorcycle Radiator Grille Cover Protector *1.
  • The Grid design helps to completely reduce air resistance and to fully feel the pleasure of speed. The radiator guard is designed along the radiator....
  • Effectively Protecting your Radiator, it is tough enough to withstand rubbing and dashing, keep your radiator excellent without damage.Radiator guards....
Check Stock