ReviewsRadius Arm Bushing Removal Tool

X AUTOHAUX 1 Set Door Hinge Bushing Liners Replacement for Chevrolet S10 1994-2004 2 Door

The tough structure bushing removal tool has good rigidity, high precision and long service life..
Door hinge bushing liners help you line up the door pins against the hinge and put your doors back easily..
Metal construction, the product is with great performance. The bushings never rust..
The package includes bushings and an installation tool so you can remove your factory bushings and install your new door liners..
Note: Please check the detail and pictures carefully before purchasing..

Check Stock

X AUTOHAUX 1 Set Door Hinge Bushing Liners Replacement for Lincoln Town Car 1982-2011 2 Door

The tough structure bushing removal tool has good rigidity, high precision and long service life..
Door hinge bushing liners help you line up the door pins against the hinge and put your doors back easily..
Metal construction, the product is with great performance. The bushings never rust..
The package includes bushings and an installation tool so you can remove your factory bushings and install your new door liners..
Note: Please check the detail and pictures carefully before purchasing..

Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
Completes the job in a fraction of the time that traditional methods take.
Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.

Check Stock

YANGCAN Lower Control Arm Prying Tool For Any 7/8' Diameter Pry Bar

Quality: This Lower Control Arm Prying Tool is made of special steel, which can withstand huge pressure without deformation, eyelet end fits any 7/8" pry bar. The surface is coated with anti-oxidant coating to extend the service life。.
The characteristics of our tools: For this set of suspended special bushing tools, we added a protective rubber sleeve, because the cutting surface of any steel tool will not be very smooth. Adding a rubber sleeve can prevent you from scratching the vehicle during use and at the same time preventing you from cutting your body during the process of exerting force. You can use it with confidence..

Check Stock

8\ Round File Smooth Cut

For enlarging circular holes or rounded grooves that are tool small for a half round file.
Applications: Stock removal in radius areas, deburring, filing of through-holes, filing of interior radius shapes.

Check Stock

Quadratec Delrin Replacement Door Hinge Bushing Set - Fits Jeep Wrangler JK, JL 2-Door 2007-2022 - Synthetic Replacement Bushings - Lasts Longer than Factory Metal Bushings

SMOOTHS DOOR OPERATION - Over time your factory doors may not open and close as smoothly as they used to because the factory bushings are metal and wear out over time. Replace corroded and worn out door hinge pin bushings with our replacements.
LONG LASTING - Made from genuine DuPont Delrin, our synthetic door hinge bushings will never rust and will outlast the faulty factory metal bushings.
SNUG FIT - Our improved door hinge bushing design provide a snug fit while allowing your doors to open and shut smoothly.
EASY INSTALLATION - Door removal will never be any easier. Simply tap out your corroded factory bushings using the included aluminum removal punch. Our new bushings are precision machined to press into place by hand or a gentle tap.
INCLUDES - The Replacement Door Hinge Bushing include replacement bushings for the door hinges, removal tool and detailed installation instructions. The option with the EZ-ON Door Pin Guides helps to get your doors back on quickly & cleanly.

Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..

Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....

Check Stock

Raiseek Front Sight Installation Hex Tool & Armorers Disassembly Tool for Glock

Includes 1 armorers disassembly tool for Glock to aid in the removal of pins and base plates on Glock pistols.
This pin takedown tool allow maximum comfort handle.
The handle makes applying the necessary torque much easier.
The tool tip edge has a radius so there is no sharp edge to scratch your gun compared to normal punches.

Check Stock

5pcs Front End Service Tool 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit

... HIGH QUALITY - Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
MULTIFUNCTIONAL USE - Allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints. The press-type ball joint separator allows for ball joint removal without damage to boots and other parts that fork-type removers may cause..
PORTABLE CARRY BAG - All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simple organization and easy transportation..

Check Stock

HFS (R 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit

[UNIVERSAL SIZES]: Bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job..
[COMPLETE SET]: The discs sizes range from 18mm (0.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set..
[EASY OPERATION]: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally..
[HEAVY-DUTY DURABILITY]: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use..
[PROTECTIVE CARRYING CASE]: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock